Cisco Cisco Aironet 1310 Access Point Bridge Release Notes
22
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA3
OL-16114-01
Caveats
•
CSCse48137—Nested repeater does not work.
A nested 1130 access point configured for open authentication and root mode station role fails to
associate with a repeater and displays this console message:
associate with a repeater and displays this console message:
*Mar 1 00:01:34.822:%DOT11-4-CANT_ASSOC: Interface Dot11Radio1, cannot associate: No
Response
*Mar 1 00:02:17.603:%DOT11-6-DFS_SCAN_COMPLETE: DFS scan complete on frequency 5560
MHz
*Mar 1 00:02:31.821:%DOT11-4-CANT_ASSOC: Interface Dot11Radio1, cannot associate: Rcvd
response from 0014.6956.5cda channel 149 801
•
CSCsf06407—Packets from Cisco 7920 phones always fall into the COS 6 queue. This problem
occurs when the stream feature is enabled.
occurs when the stream feature is enabled.
Workaround: None.
•
CSCsg80305—When 16 SSIDs are configured, client devices sometimes fail to associate to the 16th
SSID.
SSID.
Workaround: Save the configuration and reload the UC520.
•
CSCsg90606—When an SSID is configured with WPA version 2+CCKM and encryption is set to
TKIP, wireless clients fail to authenticate to the access point.
TKIP, wireless clients fail to authenticate to the access point.
Workaround: None.
•
CSCsh84949—Wireless client fails to receive multicast data stream.
Workaround—Configure no ip igmp snooping on the access point.
•
CSCsh86675—1310 Bridge continuously authenticates and deauthenticates with LEAP enabled.
Occurs when 1310 configured as an access point and associating with an Intel 2915 802.11g radio.
Client running LEAP associates and disassociates with the client deauthenticating.
Client running LEAP associates and disassociates with the client deauthenticating.
•
CSCsi10705—The throughput on dual-radio 1200 series access points is sometimes lower than the
throughput on a single-radio 1200 series access points.
throughput on a single-radio 1200 series access points.
Workaround: None.
•
CSCsj86643—When you use the a workgroup bridge (WGB) to simulate a WMM/TSPEC client, the
WGB/pagent-sourced UP 6 traffic (followed by a TSPEC) is downgraded to best effort when ACM
is enabled. This downgrade occurs because the access point and WGB shared driver code assumes
that the workgroup bridge is an access point and the uplink traffic is invalid, and thus downgrades
all packets.
WGB/pagent-sourced UP 6 traffic (followed by a TSPEC) is downgraded to best effort when ACM
is enabled. This downgrade occurs because the access point and WGB shared driver code assumes
that the workgroup bridge is an access point and the uplink traffic is invalid, and thus downgrades
all packets.
Workaround: None.
•
CSCsk05871—Sometimes packets are not marked as voice to 7921 phones.
Condition: A 7921 phone talking to a non-WMM client (a 7920 phone, for example), a wired client,
or another 7921 client with WMM disabled.
or another 7921 client with WMM disabled.
Workaround: None.