Cisco Cisco Identity Services Engine 1.2 Leaflet
© 2015 思科系统公司
第
5 页
安全访问操作指南
WLC 配置步骤
初始
WLC 配置
以下步骤将引导您完成思科无线局域网控制器的初始配置。
步骤
1. 连接至 WLC 的控制台端口。请参阅以下设置来引导 WLC。
示例输出
(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
Would you like to terminate autoinstall? [yes]:yes
AUTO-INSTALL: process terminated -- no configuration loaded
System Name [Cisco_91:e2:64] (31 characters max): 2500wlc-1
Enter Administrative User Name (24 characters max): admin
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password : ********
Service Interface IP Address Configuration [static][DHCP]:dhcp
Enable Link Aggregation (LAG) [yes][NO]: no
Management Interface IP Address: 192.168.202.61
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.202.1
Management Interface VLAN Identifier (0 = untagged): 0
Management Interface Port Num [1 to 8]: 1
Management Interface DHCP Server IP Address: 192.168.201.72
Virtual Gateway IP Address: 1.1.1.1
Mobility/RF Group Name: example
Configure DHCP Bridging Mode [yes][NO]: no
Allow Static IP Addresses [YES][no]: no
Configure a RADIUS Server now? [YES][no]: no
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.
Enter Country Code list (enter 'help' for a list of countries) [US]:us
Enable 802.11b Network [YES][no]: yes
Enable 802.11a Network [YES][no]: yes
Enable 802.11g Network [YES][no]: yes
Enable Auto-RF [YES][no]: yes
Configure a NTP server now? [YES][no]: yes
Enter the NTP server's IP address: 192.168.201.72
Enter a polling interval between 3600 and 604800 secs: 3600
Configuration correct? If yes, system will save it and reset. [yes][NO]: yes