Cisco Cisco AP541N Wireless Access Point Maintenance Manual
Getting Started
Connecting the Access Point to a PC
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
9
1
Display the Configuration Utility by Using
Cisco Configuration Assistant 2.1 or higher
Cisco Configuration Assistant 2.1 or higher
Use Cisco Configuration Assistant 2.1 or higher (CCA) to configure the access
point when it is deployed in a Cisco Smart Business Communications System
(SBCS) network with a UC520 or SR520.
point when it is deployed in a Cisco Smart Business Communications System
(SBCS) network with a UC520 or SR520.
To configure the access point by using CCA:
STEP 1
Connect the Ethernet port on the access point to a switch port on a SBCS device.
STEP 2
Power on the Cisco AP541N.
STEP 3
Connect a PC with CCA installed to any access switch port on the UC520 or
SR520.
SR520.
STEP 4
Create a new CCA site by entering a name and the IP address of the UC520 or
SR520.
SR520.
STEP 5
Connect to the CCA site by using the appropriate login credentials.
STEP 6
Click Window > Topology View.
195058
Internet
DHCP client