Cisco Cisco AP541N Wireless Access Point Installation Guide
2
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
C
AUTION
Before you connect your access point to the network or
power it on, read the
power it on, read the
section.
Back Panel Ports
Ethernet Port—An auto-sensing, Gigabit Ethernet (802.3) port that
supports Power-over-Ethernet (PoE).
supports Power-over-Ethernet (PoE).
N
OTE
We recommend using Cat5e or better cable. Also, do not exceed
the maximum cabling distance of 328 feet (100 meters) per
segment.
the maximum cabling distance of 328 feet (100 meters) per
segment.
ANT01, ANT02, ANT03—RP-SMA connectors that accept the antennas
provided with the access point.
provided with the access point.
Label
Activity
Description
PWR
green
Powered on.
flash green
Firmware upgrade.
PoE
green
Power-over-Ethernet (PoE) is powering
the access point.
the access point.
Diag
red
Power-on-self-test (POST).
Speed
off
Data speed is zero or 10 Mbps.
amber
Data speed is 100 Mbps.
green
Data speed is 1000 Mbps.
LAN
solid green
A wired network link is established.
flash green
Passing traffic.
WLAN 2.4G
solid green
A 2.4 GHz wireless network link is
established.
established.
flash green
Passing traffic.
off
The 2.4 GHz radio is off.
WLAN 5.0G
solid green
A 5.0 GHz wireless network link is
established.
established.
flash green
Passing traffic.
off
The 5.0 GHz radio is off.