Cisco Cisco AMP Threat Grid 5004 Appliance Installation Guide
Cisco AMP Threat Grid Appliance Setup and Configuration Guide
SERVER SETUP
SERVER SETUP
16
From
To
Protocol/Port
Action
Reason
Clean interface
Corporate DNS
server
server
UDP/53 and TCP/53
Allow
Optional, only required if Clean
DNS is configured
DNS is configured
Clean interface
FireAMP
Private Cloud
Private Cloud
TCP/443
Allow
Optional, only required if
FireAMP Private Cloud
integration is used
FireAMP Private Cloud
integration is used
Power On and Boot Up
Once you have connected the server peripherals and the network interfaces, turn on the appliance and wait for it
to boot up. The Cisco screen is displayed briefly:
to boot up. The Cisco screen is displayed briefly:
Figure 8 - Cisco Screen During Boot Up
Note:
If you want to configure this interface, press F8 after the memory check is completed, and follow the
instructions provided in the section, CONFIGURING CIMC (Optional).
The TGSH Dialog is displayed on the console when the server has successfully booted up and connected: