Cisco Cisco Packet Data Gateway (PDG) Administrator's Guide
MSID and PCF Zone Based Call Redirection
▀ Configuring MSID and PCF Zone Based Call Redirection
▄ Cisco ASR 5x00 Home Agent Administration Guide
278
Important:
Commands used in the configuration samples in this section provide base functionality to the extent
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
To configure PCF zone based call redirection:
Step 1
Set parameters by applying the following example configuration:
configure
context <context_name>
pdsn-service <pdsn_service_name>
spi remote-address <pcf_ip_address> spi-number <number> secret
<secret> zone <zone_id> zone <zone_id2>...zone <zone_id32>
<secret> zone <zone_id> zone <zone_id2>...zone <zone_id32>
policy pcf-zone-match <zone_number> redirect <address> weight
<weight_num> <address2> weight <weight_num>...<address16> weight
<weight_num>
<weight_num> <address2> weight <weight_num>...<address16> weight
<weight_num>
end
Notes:
You may repeat the
spi remote-address
<pcf_ip_address>
spi-number
<number>
secret
<secret>
[
zone
<zone_id>
] [
zone
<zone_id2>...
zone
<zone_id32>
] command as
necessary. You can configure up to 32 PCF zones per PDSN service.
You may repeat the
policy pcf-zone-match
<zone_number>
{
redirect
<address>
} [
weight
<weight_num>
] [ <
address2>
[ weight
<weight_num>
]...<
address16>
[
weight
<weight_num>
] ] command as necessary, up to a maximum of 32 defined PCF zones and 16
defined PDSNs per PDSN service.
Step 2
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference