Cisco Cisco Packet Data Gateway (PDG)
echo-interval
Configures the rate at which GPRS Tunneling Protocol (GTP) v1-U echo packets are sent.
Product
ePDG
GGSN
P-GW
SAEGW
SaMOG
SGSN
S-GW
Privilege
Administrator
Command Modes
Exec > Global Configuration > Context Configuration > GTP-U Service Configuration
configure > context context_name > gtpu-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-gtpu-service)#
Syntax Description
echo-interval seconds [ dynamic [ smooth-factor multiplier ] ]
{ default | no } echo-interval
{ default | no } echo-interval
default
Disables the configured echo-interval setting.
no
Removes the configured echo-interval setting.
seconds
Specifies the number of seconds between the sending of a GTP-Uv1 echo packet. seconds must be an integer
from 60 through 3600. Default: 60
from 60 through 3600. Default: 60
dynamic [ smooth-factor multiplier ]
Enables the dynamic echo timer for the GTP-U service.
Command Line Interface Reference, Modes G - H, StarOS Release 19
1199
GTP-U Service Configuration Mode Commands
echo-interval