Cisco Cisco Packet Data Gateway (PDG)
• For dedicated-bearers, enter an integer from 2 through 9 that is greater than the QCI value entered for
the beginning of the range.
• For default-bearers, enter an integer from 6 through 9 that is greater than the QCI value entered for the
beginning of the range.
Usage Guidelines
The MME can reject default-bearers and dedicated-bearers based on QCI received from the subscription or
the peer-MME/S4-SGSN during inbound relocation or the Create Session Response/Update Bearer
Request/Create Bearer Request procedure.
the peer-MME/S4-SGSN during inbound relocation or the Create Session Response/Update Bearer
Request/Create Bearer Request procedure.
Examples
The following is a sample command that illustrates the configuration for the MME to reject bearer establishment
for the dedicated-bearer channel if QCI 7 is received from the P-GW:
for the dedicated-bearer channel if QCI 7 is received from the P-GW:
qci-reject
dedicated-bearer 7
Command Line Interface Reference, Modes I - Q, StarOS Release 19
1830
QoS Profile Configuration Mode Commands
qci-reject