Cisco Cisco ASR 5000 Manual

Page of 9109
 
Command Line Interface Reference, StarOS 
Release 18 
Last Updated October 30, 2015 
 
Americas Headquarters 
Cisco Systems, Inc. 
170 West Tasman Drive 
San Jose, CA 95134-1706  
USA 
http://www.cisco.com 
Tel:   408 526-4000 
 
800 553-NETS (6387) 
Fax:   408 527-0883 
 

Summary of Contents of manual for Cisco Cisco ASR 5000

  • Page 1: Front CoverCommand Line Interface Reference, StarOS Release 18 Last Updated October 30, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman...
  • Page 2THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND...
  • Page 3: ContentsCONTENTS About this Guide ........................................................................................... cxvii Conventions Used .............................................................................................................................. cxviii CLI Command Sections ........................................................................................................................ cxix Supported Documents and Resources ....................................................................................................
  • Page 4▀ Contents Platform Related CLI Issues ................................................................................................................. 144 IP Address Notation .............................................................................................................................. 145 IPv4 Dotted-Decimal Notation .......................................................................................................... 145 IPv6 Colon-Separated-Hexadecimal...
  • Page 5 Contents ▀ Accounting Policy Configuration Mode Commands .................................. 229 accounting-event-trigger ....................................................................................................................... 230 accounting-keys .................................................................................................................................... 232 accounting-level .................................................................................................................................... 233 accounting-mode...
  • Page 6▀ Contents redirect nexthop (any) ........................................................................................................................... 363 redirect nexthop (by host IP address) ................................................................................................... 366 redirect nexthop (by source ICMP...
  • Page 7 Contents ▀ check-point accounting ......................................................................................................................... 456 content-filtering category match-method .............................................................................................. 458 content-filtering category policy-id ........................................................................................................ 459 credit-control ......................................................................................................................................... 461...
  • Page 8▀ Contents policy-control bind-default-bearer ......................................................................................................... 554 policy-control burst-size ........................................................................................................................ 556 policy-control charging-action-override ................................................................................................. 557 policy-control charging-rule-base-name ............................................................................................... 558 policy-control dynamic-rule-limit...
  • Page 9 Contents ▀ ip remote-address ................................................................................................................................. 626 ip remote-port ....................................................................................................................................... 628 priority ................................................................................................................................................... 629 ACS Port Map Configuration Mode Commands...
  • Page 10▀ Contents exit ........................................................................................................................................................ 703 extract-host-from-uri ............................................................................................................................. 704 firewall dos-protection ........................................................................................................................... 706 firewall flooding ..................................................................................................................................... 709 firewall icmp-destination-unreachable-message-threshold .................................................................. 711...
  • Page 11 Contents ▀ url-preprocessing .................................................................................................................................. 795 video optimization-preprocessing cae-readdressing ............................................................................ 796 websocket flow-detection ..................................................................................................................... 797 wtp out-of-order-timeout ....................................................................................................................... 798 wtp...
  • Page 12▀ Contents ftp server-ip-address ............................................................................................................................. 867 ftp server-port ....................................................................................................................................... 868 ftp session-length .................................................................................................................................. 869 ftp state ................................................................................................................................................. 870 ftp url...
  • Page 13 Contents ▀ imap session-length .............................................................................................................................. 951 imap session-previous-state ................................................................................................................. 952 imap session-state ................................................................................................................................ 953 imap state ............................................................................................................................................. 954 imap...
  • Page 14▀ Contents pop3 session-length ............................................................................................................................ 1039 pop3 state ........................................................................................................................................... 1041 pop3 user-name .................................................................................................................................. 1042 pptp any-match ................................................................................................................................... 1044 pptp ctrl-msg-type...
  • Page 15 Contents ▀ sip previous-state ............................................................................................................................... 1115 sip reply code ..................................................................................................................................... 1116 sip request method ............................................................................................................................. 1117 sip request packet...
  • Page 16▀ Contents wsp domain ......................................................................................................................................... 1196 wsp downlink ...................................................................................................................................... 1198 wsp first-request-packet...................................................................................................................... 1199 wsp host .............................................................................................................................................. 1200 wsp pdu-length ......................................................................................................................................
  • Page 17 Contents ▀ ALCAP Configuration Mode Commands .................................................... 1269 aal2-node ............................................................................................................................................ 1270 aal2-route............................................................................................................................................ 1272 associate............................................................................................................................................. 1274 end ...................................................................................................................................................... 1275 exit...
  • Page 18▀ Contents fw-and-nat policy ................................................................................................................................. 1354 gsm-qos negotiate .............................................................................................................................. 1356 gtpp group ........................................................................................................................................... 1358 gtpp secondary-group ......................................................................................................................... 1360 idle-timeout-activity ................................................................................................................................
  • Page 19 Contents ▀ policy................................................................................................................................................... 1433 ppp ...................................................................................................................................................... 1435 proxy-mip ............................................................................................................................................ 1437 qci ....................................................................................................................................................... 1439 qos negotiate-limit .............................................................................................................................. 1441 qos rate-limit...
  • Page 20▀ Contents ip ......................................................................................................................................................... 1520 ip access-group .................................................................................................................................. 1523 ip address pool ................................................................................................................................... 1524 ip context-name .................................................................................................................................. 1525 isr-sequential-paging .............................................................................................................................
  • Page 21 Contents ▀ threshold high-activity ......................................................................................................................... 1607 threshold monitoring ........................................................................................................................... 1609 threshold rx-utilization......................................................................................................................... 1611 threshold tx-utilization ......................................................................................................................... 1613 toh-sdsf ..................................................................................................................................................
  • Page 22▀ Contents BGP IP VRF Configuration Mode Commands............................................ 1685 end ...................................................................................................................................................... 1686 exit ...................................................................................................................................................... 1687 route-distinguisher .............................................................................................................................. 1688 route-target ............................................................................................................................................
  • Page 23 Contents ▀ end ...................................................................................................................................................... 1755 exit ...................................................................................................................................................... 1756 fa schema ........................................................................................................................................... 1757 file ....................................................................................................................................................... 1759 fng schema ......................................................................................................................................... 1761...
  • Page 24▀ Contents ppp schema ........................................................................................................................................ 1851 ps-network-gtpu schema .................................................................................................................... 1853 ps-network-ranap schema .................................................................................................................. 1855 ps-network-sccp schema .................................................................................................................... 1857 radius schema...
  • Page 25 Contents ▀ ciphering-algorithm-gprs ..................................................................................................................... 1952 csfb ..................................................................................................................................................... 1953 description .......................................................................................................................................... 1955 diameter-result-code-mapping ........................................................................................................... 1956 direct-tunnel ........................................................................................................................................ 1958 dns-ggsn ................................................................................................................................................
  • Page 26▀ Contents location-area-list ................................................................................................................................. 2033 location-reporting ................................................................................................................................ 2035 lte-zone-code ...................................................................................................................................... 2036 map ..................................................................................................................................................... 2038 map-service ........................................................................................................................................ 2040 max-bearers-per-subscriber ............................................................................................................... 2041...
  • Page 27 Contents ▀ vplmn-address .................................................................................................................................... 2125 zone-code ........................................................................................................................................... 2127 Call-Home Configuration Mode ................................................................... 2129 activate ............................................................................................................................................... 2130 alert-group .......................................................................................................................................... 2131...
  • Page 28▀ Contents tcp-mode ............................................................................................................................................. 2192 Channelized Port Configuration Mode Commands .................................. 2193 alarm-disable ...................................................................................................................................... 2194 alarm-soak-timer ................................................................................................................................. 2195 clock-source ...........................................................................................................................................
  • Page 29 Contents ▀ session-delete-delay........................................................................................................................... 2256 timestamp-option-validation................................................................................................................ 2257 timestamp-replay-protection ............................................................................................................... 2258 Congestion Action Profile Configuration Mode Commands ................... 2259 drop..................................................................................................................................................... 2260...
  • Page 30▀ Contents access-list undefined .......................................................................................................................... 2327 administrator ....................................................................................................................................... 2328 apn ...................................................................................................................................................... 2331 asn-qos-descriptor .............................................................................................................................. 2333 asn-service-profile .............................................................................................................................. 2335 asngw-service ........................................................................................................................................
  • Page 31 Contents ▀ diameter authentication ...................................................................................................................... 2416 diameter authentication failure-handling ............................................................................................ 2419 diameter dictionary ............................................................................................................................. 2421 diameter endpoint ............................................................................................................................... 2422...
  • Page 32▀ Contents gtpp timeout ........................................................................................................................................ 2512 gtpp trigger .......................................................................................................................................... 2513 gtpp transport-layer ............................................................................................................................. 2514 gtpu-service ........................................................................................................................................ 2515 ha-service ........................................................................................................................................... 2517...
  • Page 33 Contents ▀ ipv6 prefix-list ...................................................................................................................................... 2603 ipv6 prefix-list sequence-number ....................................................................................................... 2605 ipv6 route ............................................................................................................................................ 2606 ipv6 route-access-list .......................................................................................................................... 2609...
  • Page 34▀ Contents ppp ...................................................................................................................................................... 2686 ppp magic-number .............................................................................................................................. 2691 ppp statistics ....................................................................................................................................... 2692 proxy-dns intercept-list ........................................................................................................................ 2694 radius accounting ...................................................................................................................................
  • Page 35 Contents ▀ sbc-service.......................................................................................................................................... 2775 server .................................................................................................................................................. 2776 service-redundancy-protocol .............................................................................................................. 2778 session-event-module ........................................................................................................................ 2779 sgsn-service ....................................................................................................................................... 2780 sgs-service.......................................................................................................................................... 2782 sgtp-service...
  • Page 36▀ Contents exit ...................................................................................................................................................... 2857 failure-handling ................................................................................................................................... 2858 gy-rf-trigger-type ................................................................................................................................. 2862 imsi-imeisv-encode-format.................................................................................................................. 2864 mode ................................................................................................................................................... 2865 pending-traffic-treatment..................................................................................................................... 2866 quota ......................................................................................................................................................
  • Page 37 Contents ▀ lifetime ................................................................................................................................................ 2935 rekey ................................................................................................................................................... 2937 Crypto Map IKEv2-IPv6 Configuration Mode Commands ........................ 2939 allow-cert-enc cert-hash-url ...................................................................................................................
  • Page 38▀ Contents blacklist ............................................................................................................................................... 3020 ca-certificate list .................................................................................................................................. 3021 ca-crl list .............................................................................................................................................. 3022 certificate............................................................................................................................................. 3023 configuration-payload ......................................................................................................................... 3024 control-dont-fragment ............................................................................................................................
  • Page 39 Contents ▀ redirect ................................................................................................................................................ 3086 CSCF AoR Policy Rules Configuration Mode Commands ....................... 3089 after..................................................................................................................................................... 3090 aor....................................................................................................................................................... 3091 before.....................................................................................................................................................
  • Page 40▀ Contents CSCF IFC SPT Group Mode Commands .................................................... 3145 end ...................................................................................................................................................... 3146 exit ...................................................................................................................................................... 3147 spt-condition ....................................................................................................................................... 3148 CSCF...
  • Page 41 Contents ▀ registration .......................................................................................................................................... 3203 tps-rate................................................................................................................................................ 3204 CSCF Policy Configuration Mode Commands........................................... 3205 aor-policy-rules ................................................................................................................................... 3206 end ...................................................................................................................................................... 3207...
  • Page 42▀ Contents exit ...................................................................................................................................................... 3265 route .................................................................................................................................................... 3266 CSCF Security Configuration Mode Commands ....................................... 3275 auth-failure-weight .............................................................................................................................. 3276 bad-request-weight ................................................................................................................................
  • Page 43 Contents ▀ rfc3261-proxy ...................................................................................................................................... 3339 server-header ..................................................................................................................................... 3340 server-name ....................................................................................................................................... 3341 serving-cscf ........................................................................................................................................ 3342 serving-cscf-list ................................................................................................................................... 3343 session-timer .........................................................................................................................................
  • Page 44▀ Contents decompression-memory-size.............................................................................................................. 3404 end ...................................................................................................................................................... 3405 exit ...................................................................................................................................................... 3406 state-memory-size .............................................................................................................................. 3407 CSCF SIP Proxy Configuration Mode Commands .......................................
  • Page 45 Contents ▀ dhcpv6-server-preference .................................................................................................................. 3466 disable ................................................................................................................................................ 3467 enable ................................................................................................................................................. 3468 end ...................................................................................................................................................... 3469 exit ...................................................................................................................................................... 3470 process ..................................................................................................................................................
  • Page 46▀ Contents app-level-retransmission..................................................................................................................... 3532 associate ............................................................................................................................................. 3534 cea-timeout ......................................................................................................................................... 3536 connection retry-timeout ..................................................................................................................... 3537 connection timeout .............................................................................................................................. 3538 description........................................................................................................................................... 3539...
  • Page 47 Contents ▀ cache ttl .............................................................................................................................................. 3603 case-sensitive ..................................................................................................................................... 3604 description .......................................................................................................................................... 3605 end ...................................................................................................................................................... 3606 exit ...................................................................................................................................................... 3607 resolver...
  • Page 48▀ Contents eir-address .......................................................................................................................................... 3692 exit ...................................................................................................................................................... 3694 include-imsi ......................................................................................................................................... 3695 map-include-imsi ................................................................................................................................. 3696 EPDG Service Configuration Mode Commands ...........................................
  • Page 49 Contents ▀ port-switch-on-L3-fail .......................................................................................................................... 3755 vlan-map ............................................................................................................................................. 3757 Ethernet Port Configuration Mode Commands ......................................... 3759 bind interface ...................................................................................................................................... 3760...
  • Page 50▀ Contents clear active-charging group-of-ruledefs statistics ............................................................................... 3836 clear active-charging nat statistics ...................................................................................................... 3837 clear active-charging regex statistics .................................................................................................. 3838...
  • Page 51 Contents ▀ clear gprsns statistics ......................................................................................................................... 3900 clear gprsssf statistics ........................................................................................................................ 3902 clear gtpc statistics ............................................................................................................................. 3903 clear gtpp...
  • Page 52▀ Contents clear ps-network statistics................................................................................................................... 3967 clear qos npu stats .............................................................................................................................. 3968 clear radius accounting archive .......................................................................................................... 3969 clear radius...
  • Page 53 Contents ▀ debug .................................................................................................................................................. 4052 debug bfd ............................................................................................................................................ 4053 debug ip .............................................................................................................................................. 4054 debug ip bgp ....................................................................................................................................... 4055 debug...
  • Page 54▀ Contents logging trace ....................................................................................................................................... 4137 logs checkpoint ................................................................................................................................... 4139 lsp-ping ............................................................................................................................................... 4140 lsp-traceroute ...................................................................................................................................... 4141 mkdir ................................................................................................................................................... 4142 mme...
  • Page 55 Contents ▀ srp initiate-switchover ......................................................................................................................... 4237 srp reset-auth-probe-fail ..................................................................................................................... 4238 srp reset-diameter-fail......................................................................................................................... 4239 srp terminate-post-process ................................................................................................................. 4240 srp validate-configuration...
  • Page 56▀ Contents show active-charging flows ................................................................................................................. 4319 show active-charging fw-and-nat policy.............................................................................................. 4333 show active-charging group-of-objects ............................................................................................... 4335 show active-charging group-of-prefixed-urls...
  • Page 57 Contents ▀ show ca-crl.......................................................................................................................................... 4439 show cae-group server ....................................................................................................................... 4440 show call-control-profile ...................................................................................................................... 4441 show call-home ................................................................................................................................... 4443 show...
  • Page 58▀ Contents show cscf peer-servers-group ............................................................................................................ 4523 show cscf service ................................................................................................................................ 4524 show cscf sessions ............................................................................................................................. 4527 show cscf sip...
  • Page 59 Contents ▀ show global-title-translation ................................................................................................................ 4602 show gmb statistics ............................................................................................................................ 4603 show gmm-sm statistics ..................................................................................................................... 4604 show gprsns statistics...
  • Page 60▀ Contents show ip policy-forward ........................................................................................................................ 4685 show ip pool ........................................................................................................................................ 4686 show ip prefix-list ................................................................................................................................ 4689 show ip route...
  • Page 61 Contents ▀ show mipv6ha ..................................................................................................................................... 4775 show mme-service .............................................................................................................................. 4777 show mme-service db record ............................................................................................................. 4778 show mme-service db...
  • Page 62▀ Contents show profile-id-qci-mapping ................................................................................................................ 4854 show ps-network ................................................................................................................................. 4855 show ps-network counters .................................................................................................................. 4856 show ps-network statistics .................................................................................................................. 4857...
  • Page 63 Contents ▀ show sgsn-pool ................................................................................................................................... 4932 show sgsn-service .............................................................................................................................. 4933 show sgtp-service ............................................................................................................................... 4934 show sgtpc statistics ........................................................................................................................... 4936...
  • Page 64▀ Contents fa-ha-spi .............................................................................................................................................. 5065 gre ....................................................................................................................................................... 5068 ha-monitor ........................................................................................................................................... 5070 idle-timeout-mode ............................................................................................................................... 5072 ignore-mip-key-data ............................................................................................................................ 5073 ignore-stale-challenge ........................................................................................................................ 5074...
  • Page 65 Contents ▀ nat policy............................................................................................................................................. 5142 nat private-ip-flow-timeout .................................................................................................................. 5144 nat suppress-aaa-update.................................................................................................................... 5145 Firewall-and-NAT Access Ruledef Configuration Mode Commands .........
  • Page 66▀ Contents associate pgw-service ........................................................................................................................ 5215 authorize-with-hss ............................................................................................................................... 5216 bind ..................................................................................................................................................... 5218 cc behavior.......................................................................................................................................... 5220 cc profile.............................................................................................................................................. 5221 default ....................................................................................................................................................
  • Page 67 Contents ▀ arp....................................................................................................................................................... 5297 autoconfirm ......................................................................................................................................... 5298 autoless .............................................................................................................................................. 5299 banner................................................................................................................................................. 5300 boot delay ........................................................................................................................................... 5302 boot interface .........................................................................................................................................
  • Page 68▀ Contents css service .......................................................................................................................................... 5394 diameter dynamic-dictionary ............................................................................................................... 5395 diameter-host-template ....................................................................................................................... 5397 diameter-proxy ram-disk ..................................................................................................................... 5399 ecmp-lag hash .......................................................................................................................................
  • Page 69 Contents ▀ pdu-session-recovery ......................................................................................................................... 5479 peer-profile ......................................................................................................................................... 5480 plugin .................................................................................................................................................. 5482 port atm............................................................................................................................................... 5483 port bits ............................................................................................................................................... 5484 port...
  • Page 70▀ Contents statistics-backup-interval .................................................................................................................... 5564 support collection ................................................................................................................................ 5565 support record ..................................................................................................................................... 5567 suspend local-user .............................................................................................................................. 5569 system................................................................................................................................................. 5570 Global...
  • Page 71 Contents ▀ threshold dcca-unknown-rating-group ................................................................................................ 5662 threshold diameter diameter-retry-rate ............................................................................................... 5664 threshold dns-learnt-ip-max-entries .................................................................................................... 5666 threshold dns-learnt-ipv4-max-entries ................................................................................................ 5668...
  • Page 72▀ Contents threshold poll 10sec-cpu-utilization interval ........................................................................................ 5768 threshold poll a11-ppp-send-discard interval...................................................................................... 5769 threshold poll a11-rac-msg-discard interval ........................................................................................ 5771 threshold...
  • Page 73 Contents ▀ threshold poll error-presence interval ................................................................................................. 5836 threshold poll error-reg-auth interval .................................................................................................. 5837 threshold poll error-tcp interval ..............................................................................................................
  • Page 74▀ Contents threshold poll phsgw-max-eap-retry interval....................................................................................... 5892 threshold poll phsgw-max-eapol-retry interval .................................................................................... 5893 threshold poll phsgw-network-entry-denial interval ............................................................................ 5894 threshold...
  • Page 75 Contents ▀ threshold total-gprs-pdp-sessions ...................................................................................................... 5971 threshold total-gprs-sessions.............................................................................................................. 5973 threshold total-ha-sessions................................................................................................................. 5975 threshold total-hnbgw-hnb-sessions ................................................................................................... 5977 threshold total-hnbgw-iu-sessions .........................................................................................................
  • Page 76▀ Contents exit ...................................................................................................................................................... 6074 keepalive ............................................................................................................................................. 6075 source ................................................................................................................................................. 6077 tos ....................................................................................................................................................... 6078 ttl ......................................................................................................................................................... 6080 Gs Service Configuration...
  • Page 77 Contents ▀ throttling-behavior ............................................................................................................................... 6140 validity-period ..................................................................................................................................... 6142 weightage ........................................................................................................................................... 6143 GTPP Server Group Configuration Mode Commands .............................. 6145...
  • Page 78▀ Contents sequence-number ............................................................................................................................... 6228 source-port .......................................................................................................................................... 6229 udp-checksum .................................................................................................................................... 6231 HA Proxy DNS Configuration Mode Commands ....................................... 6233 description..............................................................................................................................................
  • Page 79 Contents ▀ directory .............................................................................................................................................. 6306 end ...................................................................................................................................................... 6307 exit ...................................................................................................................................................... 6308 file ....................................................................................................................................................... 6309 HeNB-GW Access Service Configuration Mode...
  • Page 80▀ Contents profile-id-qci-mapping ......................................................................................................................... 6371 registration-deny ................................................................................................................................. 6372 retransmission-timeout ....................................................................................................................... 6374 rsvp ..................................................................................................................................................... 6375 setup-timeout ...................................................................................................................................... 6376 spi remote-address ................................................................................................................................
  • Page 81 Contents ▀ associate rtp pool ............................................................................................................................... 6444 authorised-macro-lai macro-info-ie-absent-action .............................................................................. 6446 authorised-macro-lai mcc ................................................................................................................... 6447 common-plmn ..................................................................................................................................... 6448 end...
  • Page 82▀ Contents ranap reset .......................................................................................................................................... 6519 sgsn deadtime .................................................................................................................................... 6521 sgsn point-code .................................................................................................................................. 6523 HNB-RN PLMN Configuration Mode Commands....................................... 6525...
  • Page 83 Contents ▀ end ...................................................................................................................................................... 6588 exit ...................................................................................................................................................... 6589 p-cscf discovery .................................................................................................................................. 6590 p-cscf table ......................................................................................................................................... 6592 policy-control ...................................................................................................................................... 6595...
  • Page 84▀ Contents accounting-context .............................................................................................................................. 6658 associate sgtp-service ........................................................................................................................ 6659 bind ..................................................................................................................................................... 6661 connection authorization ..................................................................................................................... 6664 end ...................................................................................................................................................... 6665 exit...
  • Page 85 Contents ▀ redirect css service (by ICMP packets) .............................................................................................. 6755 redirect css service (by IP packets) .................................................................................................... 6759 redirect...
  • Page 86▀ Contents mbms .................................................................................................................................................. 6863 network-sharing cs-ps-coordination .................................................................................................... 6864 network-sharing failure-code .............................................................................................................. 6866 network-sharing non-shared ............................................................................................................... 6868 network-sharing stop-redirect-reject-cause ...........................................................................................
  • Page 87 Contents ▀ mtp2-aerm-normal-threshold .............................................................................................................. 6926 mtp2-eim-decrement .......................................................................................................................... 6927 mtp2-eim-increment............................................................................................................................ 6928 mtp2-eim-threshold ............................................................................................................................. 6929 mtp2-error-correction .......................................................................................................................... 6930 mtp2-lssu-len ...................................................................................................................................... 6931...
  • Page 88▀ Contents bind ..................................................................................................................................................... 6990 data sequence-number ....................................................................................................................... 6991 default ................................................................................................................................................. 6992 end ...................................................................................................................................................... 6995 exit ...................................................................................................................................................... 6996 ip source-violation...
  • Page 89 Contents ▀ bind s1-mme ....................................................................................................................................... 7060 end ...................................................................................................................................................... 7061 exit ...................................................................................................................................................... 7062 s1-mme ip qos-dscp ........................................................................................................................... 7063 s1-mme sctp...
  • Page 90▀ Contents mme .................................................................................................................................................... 7122 LTE MME HeNB-GW Management Database Configuration Mode Commands 7125 end ...................................................................................................................................................... 7126 exit ...................................................................................................................................................... 7127...
  • Page 91 Contents ▀ end ...................................................................................................................................................... 7190 exit ...................................................................................................................................................... 7191 network-name ..................................................................................................................................... 7192 tai-custom-list ..................................................................................................................................... 7193 tai-mgmt-obj ........................................................................................................................................ 7194 timezone ................................................................................................................................................
  • Page 92▀ Contents aaa accounting ................................................................................................................................... 7258 bind ..................................................................................................................................................... 7259 default ................................................................................................................................................. 7261 end ...................................................................................................................................................... 7263 exit ...................................................................................................................................................... 7264 refresh-advice-option .............................................................................................................................
  • Page 93 Contents ▀ local-cause-code-mapping no-active-bearers .................................................................................... 7345 local-cause-code-mapping peer-node-unknown ................................................................................ 7347 local-cause-code-mapping pgw-selection-failure ............................................................................... 7349 local-cause-code-mapping restricted-zone-code ............................................................................... 7351 local-cause-code-mapping...
  • Page 94▀ Contents sctp ..................................................................................................................................................... 7427 tac-to-lac-mapping .............................................................................................................................. 7428 timer .................................................................................................................................................... 7429 vlr ........................................................................................................................................................ 7431 vlr-failure ............................................................................................................................................. 7433 MPLS-IP Configuration Mode...
  • Page 95 Contents ▀ Network Service Virtual Link Configuration Mode Commands ............... 7493 end ...................................................................................................................................................... 7494 exit ...................................................................................................................................................... 7495 nsvl-address ..........................................................................................................................................
  • Page 96▀ Contents default-metric ...................................................................................................................................... 7568 distance............................................................................................................................................... 7569 distribute-list ........................................................................................................................................ 7571 end ...................................................................................................................................................... 7573 exit ...................................................................................................................................................... 7574 ip vrf .................................................................................................................................................... 7575...
  • Page 97 Contents ▀ associate monitoring-key .................................................................................................................... 7634 authorize ............................................................................................................................................. 7636 dissociate monitoring-key ................................................................................................................... 7638 dynamic-rule-install ............................................................................................................................. 7640 dynamic-rule-uninstall......................................................................................................................... 7644 end...
  • Page 98▀ Contents spr-profile-not-found ........................................................................................................................... 7727 threshold-condition usage-monitor ..................................................................................................... 7728 user-access-network ........................................................................................................................... 7731 user-equipment-info esn ..................................................................................................................... 7733 user-equipment-info eui64 .................................................................................................................. 7735...
  • Page 99 Contents ▀ eval-priority ......................................................................................................................................... 7800 exit ...................................................................................................................................................... 7802 service-tag .......................................................................................................................................... 7803 timeout long-duration .......................................................................................................................... 7805 usage-monitor ..................................................................................................................................... 7807 unknown-services-treatment...
  • Page 100▀ Contents policy-control ....................................................................................................................................... 7884 server .................................................................................................................................................. 7885 PCP Policy Control Configuration Mode Commands ............................... 7887 end ...................................................................................................................................................... 7888 exit...
  • Page 101 Contents ▀ end ...................................................................................................................................................... 7957 enhanced-pcf-redirection .................................................................................................................... 7958 exit ...................................................................................................................................................... 7959 fragment.............................................................................................................................................. 7960 gre....................................................................................................................................................... 7961 inter-pdsn-handoff mobility-event-indicator ........................................................................................ 7964...
  • Page 102▀ Contents Peer Profile Configuration Mode Commands ............................................ 8035 arp-mapping ........................................................................................................................................ 8036 description........................................................................................................................................... 8037 end ...................................................................................................................................................... 8038 exit ...................................................................................................................................................... 8039...
  • Page 103 Contents ▀ diameter origin endpoint ..................................................................................................................... 8107 diameter request-timeout.................................................................................................................... 8108 diameter sgsn-change-reporting ........................................................................................................ 8110 diameter update-dictionary-avps ........................................................................................................ 8112 end...
  • Page 104▀ Contents exit ...................................................................................................................................................... 8183 profile-id .............................................................................................................................................. 8184 QoS L2 Mapping Configuration Mode Commands ................................... 8187 internal-priority .................................................................................................................................... 8188 QoS...
  • Page 105 Contents ▀ dual-address-pdp ................................................................................................................................ 8253 enb-direct-data-forward ...................................................................................................................... 8255 end ...................................................................................................................................................... 8256 exit ...................................................................................................................................................... 8257 lac ....................................................................................................................................................... 8258 mbms .....................................................................................................................................................
  • Page 106▀ Contents use-calculated-rtp-ts-stride ................................................................................................................. 8317 use-ipid-override ................................................................................................................................. 8318 use-optimized-talkspurt....................................................................................................................... 8319 use-optimized-transience.................................................................................................................... 8320 use-timer-based-compression ............................................................................................................ 8321 use-uncomp-profile ............................................................................................................................. 8322 RoHC Profile...
  • Page 107 Contents ▀ set ip next-hop .................................................................................................................................... 8374 set ipv6 next-hop ................................................................................................................................ 8375 set local-preference ............................................................................................................................ 8376 set metric ...............................................................................................................................................
  • Page 108▀ Contents SCTP Parameter Template Configuration Mode Commands ................... 8439 end ...................................................................................................................................................... 8440 exit ...................................................................................................................................................... 8441 sctp-alpha ........................................................................................................................................... 8442 sctp-alt-accept-flag...
  • Page 109 Contents ▀ Session Event Module Configuration Mode Commands.......................... 8503 end ...................................................................................................................................................... 8504 event ................................................................................................................................................... 8505 exit ...................................................................................................................................................... 8508 file...
  • Page 110▀ Contents tlli-cb-audit........................................................................................................................................... 8573 umts-aka-r99 ....................................................................................................................................... 8574 SGSN Interface Management Configuration Mode ................................... 8575 end ...................................................................................................................................................... 8576 exit ...................................................................................................................................................... 8577...
  • Page 111 Contents ▀ dns israu-mcc-mnc-encoding ............................................................................................................. 8642 end ...................................................................................................................................................... 8644 exit ...................................................................................................................................................... 8645 gmm .................................................................................................................................................... 8646 gs-service ........................................................................................................................................... 8651 lac...
  • Page 112▀ Contents end ...................................................................................................................................................... 8726 exit ...................................................................................................................................................... 8727 gtpu-error-ind ...................................................................................................................................... 8728 mag-service ........................................................................................................................................ 8730 ntsr session-hold timeout .................................................................................................................... 8731 page-ue...
  • Page 113 Contents ▀ accounting-mode ................................................................................................................................ 8793 active-charging bandwidth-policy ....................................................................................................... 8795 active-charging link-monitor tcp .......................................................................................................... 8796 active-charging radio-congestion ....................................................................................................... 8798 active-charging...
  • Page 114▀ Contents ip multicast discard ............................................................................................................................. 8863 ip qos-dscp.......................................................................................................................................... 8864 ip route ................................................................................................................................................ 8866 ip source-validation ............................................................................................................................. 8867 ip user-datagram-tos...
  • Page 115 Contents ▀ qos traffic-shape ................................................................................................................................. 8941 radius accounting ............................................................................................................................... 8944 radius group ........................................................................................................................................ 8947 radius returned-framed-ip-address ..................................................................................................... 8948 rohc-profile-name...
  • Page 116
  • Page 117: About this GuideAbout this Guide This preface describes the Command Line Interface Reference and its document conventions. This reference describes how to...
  • Page 118 About this Guide ▀ Conventions Used Conventions Used The following tables describe the conventions used throughout this documentation. Icon...
  • Page 119About this Guide CLI Command Sections ▀ CLI Command Sections The following table describes the individual sections in the command...
  • Page 120 About this Guide ▀ Supported Documents and Resources Supported Documents and Resources Related Common Documentation The following common documents...
  • Page 121About this Guide Supported Documents and Resources ▀  MURAL User Guide  MVG Administration Guide  NAT Administration Guide...
  • Page 122 About this Guide ▀ Contacting Customer Support Contacting Customer Support Use the information in this section to contact customer...
  • Page 123: Chapter 1 Command Line Interface OverviewChapter 1 Command Line Interface Overview This chapter describes the numerous features in the command line interface (CLI). It includes...
  • Page 124 Command Line Interface Overview ▀ CLI Structure CLI Structure CLI commands are strings of commands or keywords and user-specified...
  • Page 125Command Line Interface Overview CLI Command Modes ▀ CLI Command Modes There are two primary CLI command modes:  Exec...
  • Page 126 Command Line Interface Overview ▀ CLI Administrative Users CLI Administrative Users This section contains information on the administrative user...
  • Page 127Command Line Interface Overview CLI Administrative Users ▀ The default value is 1 (CLI). RADIUS Mapping System RADIUS server configuration...
  • Page 128 Command Line Interface Overview ▀ CLI Administrative Users The NAS is defined as a client-side requesting component associated with...
  • Page 129Command Line Interface Overview CLI Administrative Users ▀ Table 3. User Privilege to User Type Mapping User Type as Defined...
  • Page 130 Command Line Interface Overview ▀ CLI Administrative Users  exit  help  logs checkpoint  no logging active...
  • Page 131Command Line Interface Overview CLI Administrative Users ▀  monitor subscriber  newcall  no card  no debug ...
  • Page 132 Command Line Interface Overview ▀ CLI Administrative Users Security Administrator Mode Commands Security administrators can access all system commands....
  • Page 133Command Line Interface Overview CLI Contexts ▀ CLI Contexts A context is a group of configuration parameters that apply to...
  • Page 134 Command Line Interface Overview ▀ Understanding the CLI Command Prompt Understanding the CLI Command Prompt The CLI provides an...
  • Page 135Command Line Interface Overview CLI Command Syntax ▀ CLI Command Syntax This section describes the components of the CLI command...
  • Page 136 Command Line Interface Overview ▀ Entering and Viewing CLI Commands Entering and Viewing CLI Commands This section describes various...
  • Page 137Command Line Interface Overview Entering and Viewing CLI Commands ▀ Using CLI Auto-Pagination When you enter commands whose expected results...
  • Page 138 Command Line Interface Overview ▀ Entering and Viewing CLI Commands After aborting the above action, you can again revisit...
  • Page 139Command Line Interface Overview Entering and Viewing CLI Commands ▀ A regular expression is a pattern that describes a set...
  • Page 140 Command Line Interface Overview ▀ Obtaining CLI Help Obtaining CLI Help The CLI provides context-sensitive help for every command...
  • Page 141Command Line Interface Overview Exiting the CLI and CLI Command Modes ▀ Exiting the CLI and CLI Command Modes A...
  • Page 142 Command Line Interface Overview ▀ Accessing the CLI Accessing the CLI Access the CLI through the following methods: ...
  • Page 143Command Line Interface Overview Accessing the CLI ▀ 3. If no configuration file is present (that is, this is the...
  • Page 144 Command Line Interface Overview ▀ Platform Related CLI Issues Platform Related CLI Issues StarOS runs on ASR 5x00 and...
  • Page 145Command Line Interface Overview IP Address Notation ▀ IP Address Notation When configuring a port interface via the CLI you...
  • Page 146 Command Line Interface Overview ▀ IP Address Notation Important: On the ASR 5000, routes with IPv6 prefix lengths less...
  • Page 147Command Line Interface Overview Alphanumeric Strings ▀ Alphanumeric Strings Some CLI commands require the entry of a string of characters...
  • Page 148 Command Line Interface Overview ▀ Alphanumeric Strings ▄ Command Line Interface Reference, StarOS Release 18 148
  • Page 149: Chapter 2 AAA Server Group Configuration Mode CommandsChapter 2 AAA Server Group Configuration Mode Commands The AAA Server Group Configuration Mode is used to create and manage...
  • Page 150 AAA Server Group Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product...
  • Page 151AAA Server Group Configuration Mode Commands diameter accounting ▀ diameter accounting This command configures Diameter accounting parameters. Product All Privilege...
  • Page 152 AAA Server Group Configuration Mode Commands ▀ diameter accounting hd-mode: Sends records to the Diameter server, if all Diameter...
  • Page 153AAA Server Group Configuration Mode Commands diameter accounting ▀ max-transmissions max_transmissions Specifies the maximum number of transmission attempts for a...
  • Page 154 AAA Server Group Configuration Mode Commands ▀ diameter authentication diameter authentication This command configures Diameter authentication parameters. Product All...
  • Page 155AAA Server Group Configuration Mode Commands diameter authentication ▀ max-transmissions: Sets the configured maximum transmission attempts for Diameter authentication in...
  • Page 156 AAA Server Group Configuration Mode Commands ▀ diameter authentication redirect-host-avp { just-primary | primary-then-secondary } Specifies whether to use...
  • Page 157AAA Server Group Configuration Mode Commands diameter authentication failure-handling ▀ diameter authentication failure-handling This command configures the failure handling for...
  • Page 158 AAA Server Group Configuration Mode Commands ▀ diameter authentication failure-handling  retry-and-terminate: First retries, if it fails then terminates...
  • Page 159AAA Server Group Configuration Mode Commands diameter dictionary ▀ diameter dictionary This command is deprecated and is replaced by the...
  • Page 160 AAA Server Group Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 161AAA Server Group Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 162 AAA Server Group Configuration Mode Commands ▀ radius radius This command configures basic RADIUS options. Product All Privilege Security...
  • Page 163AAA Server Group Configuration Mode Commands radius ▀ Dictionary Description 3gpp2 This dictionary consists not only of all of the...
  • Page 164 AAA Server Group Configuration Mode Commands ▀ radius keepalive: Enables the AAA server alive-dead detect mechanism based on sending...
  • Page 165AAA Server Group Configuration Mode Commands radius ▀ strip-domain { authentication-only | accounting-only } Specifies that the domain must be...
  • Page 166 AAA Server Group Configuration Mode Commands ▀ radius accounting radius accounting This command configures the current context’s RADIUS accounting...
  • Page 167AAA Server Group Configuration Mode Commands radius accounting ▀ Default: 10 minutes Important: This parameter should be set to allow...
  • Page 168 AAA Server Group Configuration Mode Commands ▀ radius accounting This CLI is independent of the APN or subscriber profile...
  • Page 169AAA Server Group Configuration Mode Commands radius accounting ▀ radius accounting timeout 16 Command Line Interface Reference, StarOS Release 18...
  • Page 170 AAA Server Group Configuration Mode Commands ▀ radius accounting apn-to-be-included radius accounting apn-to-be-included This command specifies the APN name...
  • Page 171AAA Server Group Configuration Mode Commands radius accounting algorithm ▀ radius accounting algorithm This command specifies the fail-over/load-balancing algorithm to...
  • Page 172 AAA Server Group Configuration Mode Commands ▀ radius accounting algorithm based IMSI addresses. That is, IMSI based round robin...
  • Page 173AAA Server Group Configuration Mode Commands radius accounting billing-version ▀ radius accounting billing-version This command configures billing-system version of RADIUS...
  • Page 174 AAA Server Group Configuration Mode Commands ▀ radius accounting gtp trigger-policy radius accounting gtp trigger-policy This command configures the...
  • Page 175AAA Server Group Configuration Mode Commands radius accounting ha policy ▀ radius accounting ha policy This command configures the RADIUS...
  • Page 176 AAA Server Group Configuration Mode Commands ▀ radius accounting interim radius accounting interim This command configures the volume of...
  • Page 177AAA Server Group Configuration Mode Commands radius accounting interim ▀ The following command triggers RADIUS interim accounting when the total...
  • Page 178 AAA Server Group Configuration Mode Commands ▀ radius accounting ip remote-address radius accounting ip remote-address This command configures IP...
  • Page 179AAA Server Group Configuration Mode Commands radius accounting keepalive ▀ radius accounting keepalive This command configures the keepalive authentication parameters...
  • Page 180 AAA Server Group Configuration Mode Commands ▀ radius accounting keepalive interval seconds Configures the time interval between the two...
  • Page 181AAA Server Group Configuration Mode Commands radius accounting pdif trigger-policy ▀ radius accounting pdif trigger-policy This command configures the policy...
  • Page 182 AAA Server Group Configuration Mode Commands ▀ radius accounting rp radius accounting rp This command configures the RADIUS accounting...
  • Page 183AAA Server Group Configuration Mode Commands radius accounting rp ▀ trigger-event { active-handoff | active-start-param-change | active-stop } active-start-param-change: Enabled...
  • Page 184 AAA Server Group Configuration Mode Commands ▀ radius accounting rp  active-stop: Enables an R-P event (and therefore a...
  • Page 185AAA Server Group Configuration Mode Commands radius accounting server ▀ radius accounting server For accounting, this command configures the RADIUS...
  • Page 186 AAA Server Group Configuration Mode Commands ▀ radius accounting server Important: The same RADIUS server IP address and port...
  • Page 187AAA Server Group Configuration Mode Commands radius accounting server ▀ acct-off { disable | enable } Disables and enables the...
  • Page 188 AAA Server Group Configuration Mode Commands ▀ radius accounting server Usage Use this command to configure the RADIUS accounting...
  • Page 189AAA Server Group Configuration Mode Commands radius algorithm ▀ radius algorithm This command configures the RADIUS authentication server selection algorithm...
  • Page 190 AAA Server Group Configuration Mode Commands ▀ radius allow radius allow This command configures the system behavior for allowing...
  • Page 191AAA Server Group Configuration Mode Commands radius attribute ▀ radius attribute This command configures the system’s RADIUS identification parameters. Product...
  • Page 192 AAA Server Group Configuration Mode Commands ▀ radius attribute  3gpp-nsapi  3gpp-pdp-type  3gpp-rat-type  3gpp-select-mode  3gpp-session-stopindicator...
  • Page 193AAA Server Group Configuration Mode Commands radius attribute ▀  3gpp-ggsn-mcc-mnc  3gpp-gprs-qos-negotiated-profile  3gpp-imeisv  3gpp-imsi-mcc-mnc  3gpp-ms-timezone ...
  • Page 194 AAA Server Group Configuration Mode Commands ▀ radius attribute nexthop-forwarding-address nexthop_address Configures next hop IP address for this NAS...
  • Page 195AAA Server Group Configuration Mode Commands radius attribute ▀ The system uses a revertive algorithm when transitioning active NAS IP...
  • Page 196 AAA Server Group Configuration Mode Commands ▀ radius authenticate radius authenticate This command configures RADIUS authentication related parameters. Product...
  • Page 197AAA Server Group Configuration Mode Commands radius authenticate ▀ no radius authenticate null-username The following command re-enables sending of Access-Request...
  • Page 198 AAA Server Group Configuration Mode Commands ▀ radius authenticator-validation radius authenticator-validation This command enables/disables the MD5 authentication of RADIUS...
  • Page 199AAA Server Group Configuration Mode Commands radius charging ▀ radius charging This command configures basic RADIUS options for Active Charging...
  • Page 200 AAA Server Group Configuration Mode Commands ▀ radius charging max-outstanding max_messages Specifies the maximum number of outstanding messages a...
  • Page 201AAA Server Group Configuration Mode Commands radius charging accounting algorithm ▀ radius charging accounting algorithm This command specifies the fail-over/load-balancing...
  • Page 202 AAA Server Group Configuration Mode Commands ▀ radius charging accounting server radius charging accounting server This command configures RADIUS...
  • Page 203AAA Server Group Configuration Mode Commands radius charging accounting server ▀ oldports Sets the UDP communication port to the out...
  • Page 204 AAA Server Group Configuration Mode Commands ▀ radius charging algorithm radius charging algorithm This command specifies the RADIUS authentication...
  • Page 205AAA Server Group Configuration Mode Commands radius charging server ▀ radius charging server This command configures the RADIUS charging server(s)...
  • Page 206 AAA Server Group Configuration Mode Commands ▀ radius charging server oldports Sets the UDP communication port to the old...
  • Page 207AAA Server Group Configuration Mode Commands radius ip vrf ▀ radius ip vrf This command associates the specific AAA group...
  • Page 208 AAA Server Group Configuration Mode Commands ▀ radius ip vrf different RADIUS servers using the same, overlapping NAS-IP address,...
  • Page 209AAA Server Group Configuration Mode Commands radius keepalive ▀ radius keepalive This command configures the RADIUS keepalive authentication parameters. Product...
  • Page 210 AAA Server Group Configuration Mode Commands ▀ radius keepalive password Specifies the password to be used for authentication. password...
  • Page 211AAA Server Group Configuration Mode Commands radius mediation-device ▀ radius mediation-device See the radius accounting server command. Command Line Interface...
  • Page 212 AAA Server Group Configuration Mode Commands ▀ radius probe-interval radius probe-interval This command configures the time interval between two...
  • Page 213AAA Server Group Configuration Mode Commands radius probe-max-retries ▀ radius probe-max-retries This command configures the number of retries for RADIUS...
  • Page 214 AAA Server Group Configuration Mode Commands ▀ radius probe-timeout radius probe-timeout This command configures the timeout duration for Interchassis...
  • Page 215AAA Server Group Configuration Mode Commands radius server ▀ radius server This command configures RADIUS authentication server(s) in the current...
  • Page 216 AAA Server Group Configuration Mode Commands ▀ radius server [ encrypted ] key value Specifies the shared secret key...
  • Page 217AAA Server Group Configuration Mode Commands radius server ▀ probe-username user_name The user name sent to the RADIUS server to...
  • Page 218 AAA Server Group Configuration Mode Commands ▀ radius trigger radius trigger This command enables specific RADIUS triggers. Product GGSN...
  • Page 219AAA Server Group Configuration Mode Commands radius trigger ▀ uli-change Specifies to enable RADIUS trigger for User Location Information change....
  • Page 220
  • Page 221: Chapter 3 AAL2 Node Configuration Mode CommandsChapter 3 AAL2 Node Configuration Mode Commands The AAL2 Node Configuration Mode is used to configure the ATM Adaptation Layer...
  • Page 222 AAL2 Node Configuration Mode Commands ▀ aal2-path-id aal2-path-id This command set the AAL2 path identifier with AAL2 node and...
  • Page 223AAL2 Node Configuration Mode Commands aal2-path-id ▀ Example Following command sets the AAL2 path identifier 2 in an AAL2 node...
  • Page 224 AAL2 Node Configuration Mode Commands ▀ end end Exits the current mode and returns to the Exec Mode. Product...
  • Page 225AAL2 Node Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the previous mode. Product All...
  • Page 226 AAL2 Node Configuration Mode Commands ▀ point-code point-code This command configure the point code of adjacent AAL2 node in...
  • Page 227AAL2 Node Configuration Mode Commands point-code ▀ Command Line Interface Reference, StarOS Release 18 ▄ 227
  • Page 228
  • Page 229: Chapter 4 Accounting Policy Configuration Mode CommandsChapter 4 Accounting Policy Configuration Mode Commands The Accounting Policy Configuration Mode is used to define the accounting method, mode,...
  • Page 230 Accounting Policy Configuration Mode Commands ▀ accounting-event-trigger accounting-event-trigger Configures the response to specific event triggers for this policy. Multiple...
  • Page 231Accounting Policy Configuration Mode Commands accounting-event-trigger ▀ location-change Specifies that the action is initiated upon indication of a location change....
  • Page 232 Accounting Policy Configuration Mode Commands ▀ accounting-keys accounting-keys Aggregates the accounting information, using the configurable keys (QCI) along with...
  • Page 233Accounting Policy Configuration Mode Commands accounting-level ▀ accounting-level Configures the type of accounting performed by this profile. Product HSGW P-GW...
  • Page 234 Accounting Policy Configuration Mode Commands ▀ accounting-level  PDN identifier  User Equipment information if available (ESN/MEID)  Address...
  • Page 235Accounting Policy Configuration Mode Commands accounting-mode ▀ accounting-mode Configures the accounting mode for this profile. Product HSGW P-GW S-GW SAEGW...
  • Page 236 Accounting Policy Configuration Mode Commands ▀ apn-name-to-be-included apn-name-to-be-included This command configures whether the virtual or real Access Point Name...
  • Page 237Accounting Policy Configuration Mode Commands attribute ▀ attribute This command configures the attributes to be reported in Rf accounting. Product...
  • Page 238 Accounting Policy Configuration Mode Commands ▀ cc cc Configures a charging characteristics (CC) profile, within the accounting profile configuration,...
  • Page 239Accounting Policy Configuration Mode Commands cc ▀ buckets num Default: 4 Specifies the number of container changes in the S-GW...
  • Page 240 Accounting Policy Configuration Mode Commands ▀ cc time2 min hrs...time4 minutes hours: Specifies the second, third and fourth time-of-day...
  • Page 241Accounting Policy Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 242 Accounting Policy Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 243Accounting Policy Configuration Mode Commands max-containers ▀ max-containers Control the number of containers in an ACR message. Product GGSN HSGW...
  • Page 244 Accounting Policy Configuration Mode Commands ▀ operator-string operator-string Configures a text string to be included with accounting messages sent...
  • Page 245Accounting Policy Configuration Mode Commands rf ▀ rf This command controls the reporting of subscriber traffic data for Rating Groups...
  • Page 246 Accounting Policy Configuration Mode Commands ▀ rf This CLI configuration will enable Rf to take a snapshot of all...
  • Page 247Accounting Policy Configuration Mode Commands service-context-id ▀ service-context-id Configures the value to be sent in the Service-Context-Id AVP, which defines...
  • Page 248 Accounting Policy Configuration Mode Commands ▀ session session This command controls the behavior of whether to send or suppress...
  • Page 249Accounting Policy Configuration Mode Commands session ▀ Example The following command suppresses sending of ACR-Interim message when the UE is...
  • Page 250 Accounting Policy Configuration Mode Commands ▀ trigger-type trigger-type This command enables/disables the event triggers for Rf-Gy interaction. Product GGSN...
  • Page 251Accounting Policy Configuration Mode Commands trigger-type ▀ gy-sdf-volume-limit { cache | immediate } Enables the SDF volume-limit trigger for Rf-Gy...
  • Page 252
  • Page 253: Chapter 5 ACL Configuration Mode CommandsChapter 5 ACL Configuration Mode Commands The Access Control List Configuration Mode is used to create and manage IP-based, user...
  • Page 254 ACL Configuration Mode Commands ▀ deny/permit (by source IP address masking) deny/permit (by source IP address masking) Filters subscriber...
  • Page 255ACL Configuration Mode Commands deny/permit (by source IP address masking) ▀  deny: Indicates the rule, when matched, drops the...
  • Page 256 ACL Configuration Mode Commands ▀ deny/permit (by source IP address masking) before permit 1.2.3.0 0.0.0.31 The following command sets...
  • Page 257ACL Configuration Mode Commands deny/permit (any) ▀ deny/permit (any) Filters subscriber sessions based on any packet received. This command is...
  • Page 258 ACL Configuration Mode Commands ▀ deny/permit (any) deny | permit Specifies the rule is either block (deny) or an...
  • Page 259ACL Configuration Mode Commands deny/permit (by host IP address) ▀ deny/permit (by host IP address) Filters subscriber sessions based on...
  • Page 260 ACL Configuration Mode Commands ▀ deny/permit (by host IP address)  deny: Indicates the rule, when matched, drops the...
  • Page 261ACL Configuration Mode Commands deny/permit (by source ICMP packets) ▀ deny/permit (by source ICMP packets) Filters subscriber sessions based on...
  • Page 262 ACL Configuration Mode Commands ▀ deny/permit (by source ICMP packets) Important: If the options specified do not exactly match...
  • Page 263ACL Configuration Mode Commands deny/permit (by source ICMP packets) ▀ source_host_address The IP address of the source host to filter...
  • Page 264 ACL Configuration Mode Commands ▀ deny/permit (by source ICMP packets) deny log icmp 10.2.3.0 0.0.0.31 host 10.2.4.16 168 11...
  • Page 265ACL Configuration Mode Commands deny/permit (by IP packets) ▀ deny/permit (by IP packets) Filters subscriber sessions based on the internet...
  • Page 266 ACL Configuration Mode Commands ▀ deny/permit (by IP packets) Important: If the options specified do not exactly match an...
  • Page 267ACL Configuration Mode Commands deny/permit (by IP packets) ▀ dest_host_address The IP address of the destination host to filter against...
  • Page 268 ACL Configuration Mode Commands ▀ deny/permit (by IP packets) The following sets the insertion point before the first rule...
  • Page 269ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ deny/permit (by TCP/UDP packets) Filters subscriber sessions based on the transmission...
  • Page 270 ACL Configuration Mode Commands ▀ deny/permit (by TCP/UDP packets) before Indicates all rules defined subsequent to this command are...
  • Page 271ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ Important: The mask must contain a contiguous set of one-bits from...
  • Page 272 ACL Configuration Mode Commands ▀ deny/permit (by TCP/UDP packets)  One-bits in this parameter mean that the corresponding bits...
  • Page 273ACL Configuration Mode Commands deny/permit (by TCP/UDP packets) ▀ The following sets the insertion point before the first rule defined...
  • Page 274 ACL Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All Privilege...
  • Page 275ACL Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 276 ACL Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 277ACL Configuration Mode Commands readdress server ▀ readdress server Alters the destination address and port number in TCP or UDP...
  • Page 278 ACL Configuration Mode Commands ▀ readdress server before Indicates all rules defined subsequent to this command are to be...
  • Page 279ACL Configuration Mode Commands readdress server ▀ any Specifies that the rule applies to all packets. host Specifies that the...
  • Page 280 ACL Configuration Mode Commands ▀ readdress server Important: The mask must contain a contiguous set of one-bits from the...
  • Page 281ACL Configuration Mode Commands readdress server ▀ before readdress server 192.168.10.4 udp any any The following command sets the insertion...
  • Page 282 ACL Configuration Mode Commands ▀ redirect context (by IP address masking) redirect context (by IP address masking) Redirects subscriber...
  • Page 283ACL Configuration Mode Commands redirect context (by IP address masking) ▀ context context_id The context identification number of the context...
  • Page 284 ACL Configuration Mode Commands ▀ redirect context (by IP address masking) before redirect context 23 198.162.22.0 0.0.0.31 The following...
  • Page 285ACL Configuration Mode Commands redirect context (any) ▀ redirect context (any) Redirects subscriber sessions based on any packet received. This...
  • Page 286 ACL Configuration Mode Commands ▀ redirect context (any) context context_id The context identification number of the context to which...
  • Page 287ACL Configuration Mode Commands redirect context (by host IP address) ▀ redirect context (by host IP address) Redirects subscriber sessions...
  • Page 288 ACL Configuration Mode Commands ▀ redirect context (by host IP address) context context_id The context identification number of the...
  • Page 289ACL Configuration Mode Commands redirect context (by source ICMP packets) ▀ redirect context (by source ICMP packets) Redirects subscriber sessions...
  • Page 290 ACL Configuration Mode Commands ▀ redirect context (by source ICMP packets) Important: If the options specified do not exactly...
  • Page 291ACL Configuration Mode Commands redirect context (by source ICMP packets) ▀ dest_address The IP address(es) to which the packet is...
  • Page 292 ACL Configuration Mode Commands ▀ redirect context (by source ICMP packets) before redirect context 23 icmp host 192.168.100.25 The...
  • Page 293ACL Configuration Mode Commands redirect context (by IP packets) ▀ redirect context (by IP packets) Redirects subscriber sessions based on...
  • Page 294 ACL Configuration Mode Commands ▀ redirect context (by IP packets) Important: If the options specified do not exactly match...
  • Page 295ACL Configuration Mode Commands redirect context (by IP packets) ▀ dest_address The IP address(es) to which the packet is to...
  • Page 296 ACL Configuration Mode Commands ▀ redirect context (by IP packets) The following command sets the insertion point after the...
  • Page 297ACL Configuration Mode Commands redirect context (by TCP/UDP packets) ▀ redirect context (by TCP/UDP packets) Redirects subscriber sessions based on...
  • Page 298 ACL Configuration Mode Commands ▀ redirect context (by TCP/UDP packets) before Indicates all rules defined subsequent to this command...
  • Page 299ACL Configuration Mode Commands redirect context (by TCP/UDP packets) ▀ host Specifies that the rule applies to a specific host...
  • Page 300 ACL Configuration Mode Commands ▀ redirect context (by TCP/UDP packets) eq dest_port Specifies a single, specific destination TCP port...
  • Page 301ACL Configuration Mode Commands redirect css delivery-sequence ▀ redirect css delivery-sequence This is a restricted command. In 9.0 and later...
  • Page 302 ACL Configuration Mode Commands ▀ redirect css service (any) redirect css service (any) Redirects subscriber sessions based on any...
  • Page 303ACL Configuration Mode Commands redirect css service (any) ▀ css service service_name The name of the active charging service to...
  • Page 304 ACL Configuration Mode Commands ▀ redirect css service (by host IP address) redirect css service (by host IP address)...
  • Page 305ACL Configuration Mode Commands redirect css service (by host IP address) ▀ css service service_name The name of the active...
  • Page 306 ACL Configuration Mode Commands ▀ redirect css service (by ICMP packets) redirect css service (by ICMP packets) Redirects subscriber...
  • Page 307ACL Configuration Mode Commands redirect css service (by ICMP packets) ▀ Important: If the options specified do not exactly match...
  • Page 308 ACL Configuration Mode Commands ▀ redirect css service (by ICMP packets) dest_host_address The IP address of the destination host...
  • Page 309ACL Configuration Mode Commands redirect css service (by ICMP packets) ▀ redirect css service chgsvc1 icmp host 192.168.200.11 The following...
  • Page 310 ACL Configuration Mode Commands ▀ redirect css service (by IP packets) redirect css service (by IP packets) Redirects subscriber...
  • Page 311ACL Configuration Mode Commands redirect css service (by IP packets) ▀ Important: If the options specified do not exactly match...
  • Page 312 ACL Configuration Mode Commands ▀ redirect css service (by IP packets) dest_host_address The IP address of the destination host...
  • Page 313ACL Configuration Mode Commands redirect css service (by IP packets) ▀ after redirect css service chgsvc1 ip host 192.168.100.25 any...
  • Page 314 ACL Configuration Mode Commands ▀ redirect css service (by source IP address masking) redirect css service (by source IP...
  • Page 315ACL Configuration Mode Commands redirect css service (by source IP address masking) ▀ css service service_name The name of the...
  • Page 316 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) redirect css service (by TCP/UDP packets) Redirects subscriber...
  • Page 317ACL Configuration Mode Commands redirect css service (by TCP/UDP packets) ▀ Important: If the options specified do not exactly match...
  • Page 318 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) Important: The mask must contain a contiguous set...
  • Page 319ACL Configuration Mode Commands redirect css service (by TCP/UDP packets) ▀ dest_wildcard This option is used in conjunction with the...
  • Page 320 ACL Configuration Mode Commands ▀ redirect css service (by TCP/UDP packets) The following command defines a rule definition that...
  • Page 321ACL Configuration Mode Commands redirect css service (for downlink, any) ▀ redirect css service (for downlink, any) Redirects subscriber sessions...
  • Page 322 ACL Configuration Mode Commands ▀ redirect css service (for downlink, any) css service service_name The name of the active...
  • Page 323ACL Configuration Mode Commands redirect css service (for downlink, by host IP address) ▀ redirect css service (for downlink, by...
  • Page 324 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by host IP address) css service service_name The name...
  • Page 325ACL Configuration Mode Commands redirect css service (for downlink, by ICMP packets) ▀ redirect css service (for downlink, by ICMP...
  • Page 326 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by ICMP packets) Important: If the options specified do...
  • Page 327ACL Configuration Mode Commands redirect css service (for downlink, by ICMP packets) ▀ source_host_address The IP address of the source...
  • Page 328 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by ICMP packets) Example The following command defines a...
  • Page 329ACL Configuration Mode Commands redirect css service (for downlink, by IP packets) ▀ redirect css service (for downlink, by IP...
  • Page 330 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by IP packets) Important: If the options specified do...
  • Page 331ACL Configuration Mode Commands redirect css service (for downlink, by IP packets) ▀ source_host_address The IP address of the source...
  • Page 332 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by IP packets) before redirect css service chgsvc1 downlink...
  • Page 333ACL Configuration Mode Commands redirect css service (for downlink, by source IP address masking) ▀ redirect css service (for downlink,...
  • Page 334 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by source IP address masking) no Removes the rule...
  • Page 335ACL Configuration Mode Commands redirect css service (for downlink, by source IP address masking) ▀ redirect css service chgsvc1 downlink...
  • Page 336 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets) redirect css service (for downlink, by...
  • Page 337ACL Configuration Mode Commands redirect css service (for downlink, by TCP/UDP packets) ▀ Important: If the options specified do not...
  • Page 338 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets)  One-bits in this parameter mean...
  • Page 339ACL Configuration Mode Commands redirect css service (for downlink, by TCP/UDP packets) ▀ dest_wildcard This option is used in conjunction...
  • Page 340 ACL Configuration Mode Commands ▀ redirect css service (for downlink, by TCP/UDP packets) The following command defines a rule...
  • Page 341ACL Configuration Mode Commands redirect css service (for uplink, any) ▀ redirect css service (for uplink, any) Redirects subscriber sessions...
  • Page 342 ACL Configuration Mode Commands ▀ redirect css service (for uplink, any) css service service_name The name of the active...
  • Page 343ACL Configuration Mode Commands redirect css service (for uplink, by host IP address) ▀ redirect css service (for uplink, by...
  • Page 344 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by host IP address) no Removes the rule definition...
  • Page 345ACL Configuration Mode Commands redirect css service (for uplink, by host IP address) ▀ The following deletes the first rule...
  • Page 346 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by ICMP packets) redirect css service (for uplink, by...
  • Page 347ACL Configuration Mode Commands redirect css service (for uplink, by ICMP packets) ▀ Important: If the options specified do not...
  • Page 348 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by ICMP packets) source_host_address The IP address of the...
  • Page 349ACL Configuration Mode Commands redirect css service (for uplink, by ICMP packets) ▀ Example The following command defines a rule...
  • Page 350 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by IP packets) redirect css service (for uplink, by...
  • Page 351ACL Configuration Mode Commands redirect css service (for uplink, by IP packets) ▀ Important: If the options specified do not...
  • Page 352 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by IP packets) source_host_address The IP address of the...
  • Page 353ACL Configuration Mode Commands redirect css service (for uplink, by IP packets) ▀ no redirect css service chgsvc1 uplink ip...
  • Page 354 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by source IP address masking) redirect css service (for...
  • Page 355ACL Configuration Mode Commands redirect css service (for uplink, by source IP address masking) ▀ uplink Apply this rule definition...
  • Page 356 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by TCP/UDP packets) redirect css service (for uplink, by...
  • Page 357ACL Configuration Mode Commands redirect css service (for uplink, by TCP/UDP packets) ▀ before Indicates all rule definitions subsequent to...
  • Page 358 ACL Configuration Mode Commands ▀ redirect css service (for uplink, by TCP/UDP packets) host Specifies that the rule definition...
  • Page 359ACL Configuration Mode Commands redirect css service (for uplink, by TCP/UDP packets) ▀ eq dest_port Specifies a single, specific destination...
  • Page 360 ACL Configuration Mode Commands ▀ redirect nexthop (by IP address masking) redirect nexthop (by IP address masking) Redirects subscriber...
  • Page 361ACL Configuration Mode Commands redirect nexthop (by IP address masking) ▀ no Removes the rule which exactly matches the options...
  • Page 362 ACL Configuration Mode Commands ▀ redirect nexthop (by IP address masking) Important: Also note that “redirect” rules are ignored...
  • Page 363ACL Configuration Mode Commands redirect nexthop (any) ▀ redirect nexthop (any) Redirects subscriber sessions based on any packet received. This...
  • Page 364 ACL Configuration Mode Commands ▀ redirect nexthop (any) no Removes the rule which exactly matches the options specified. nexthop...
  • Page 365ACL Configuration Mode Commands redirect nexthop (any) ▀ after redirect nexthop 192.168.10.4 context 23 any The following deletes the first...
  • Page 366 ACL Configuration Mode Commands ▀ redirect nexthop (by host IP address) redirect nexthop (by host IP address) Redirects subscriber...
  • Page 367ACL Configuration Mode Commands redirect nexthop (by host IP address) ▀ no Removes the rule which exactly matches the options...
  • Page 368 ACL Configuration Mode Commands ▀ redirect nexthop (by host IP address) after redirect nexthop 192.168.10.4 context 23 host 192.168.200.11...
  • Page 369ACL Configuration Mode Commands redirect nexthop (by source ICMP packets) ▀ redirect nexthop (by source ICMP packets) Redirects subscriber sessions...
  • Page 370 ACL Configuration Mode Commands ▀ redirect nexthop (by source ICMP packets) Important: If the options specified do not exactly...
  • Page 371ACL Configuration Mode Commands redirect nexthop (by source ICMP packets) ▀ source_host_address The IP address of the source host to...
  • Page 372 ACL Configuration Mode Commands ▀ redirect nexthop (by source ICMP packets) Example The following command defines a rule that...
  • Page 373ACL Configuration Mode Commands redirect nexthop (by IP packets) ▀ redirect nexthop (by IP packets) Redirects subscriber sessions based on...
  • Page 374 ACL Configuration Mode Commands ▀ redirect nexthop (by IP packets) Important: If the options specified do not exactly match...
  • Page 375ACL Configuration Mode Commands redirect nexthop (by IP packets) ▀ source_host_address The IP address of the source host to filter...
  • Page 376 ACL Configuration Mode Commands ▀ redirect nexthop (by IP packets) The following command defines a rule that redirects packets...
  • Page 377ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ redirect nexthop (by TCP/UDP packets) Redirects subscriber sessions based on...
  • Page 378 ACL Configuration Mode Commands ▀ redirect nexthop (by TCP/UDP packets) before Indicates all rules defined subsequent to this command...
  • Page 379ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ Important: The mask must contain a contiguous set of one-bits...
  • Page 380 ACL Configuration Mode Commands ▀ redirect nexthop (by TCP/UDP packets)  One-bits in this parameter mean that the corresponding...
  • Page 381ACL Configuration Mode Commands redirect nexthop (by TCP/UDP packets) ▀ no redirect nexthop 192.168.10.4 context 23 udp any Command Line...
  • Page 382
  • Page 383: Chapter 6 ACS Bandwidth Policy Configuration Mode CommandsChapter 6 ACS Bandwidth Policy Configuration Mode Commands The ACS Bandwidth Policy Configuration Mode is used to create and manage...
  • Page 384 ACS Bandwidth Policy Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 385ACS Bandwidth Policy Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 386 ACS Bandwidth Policy Configuration Mode Commands ▀ flow limit-for-bandwidth flow limit-for-bandwidth This command allows you to configure the flow...
  • Page 387ACS Bandwidth Policy Configuration Mode Commands group-id ▀ group-id This command allows you to configure the group ID for the...
  • Page 388 ACS Bandwidth Policy Configuration Mode Commands ▀ group-id violate-action { discard | lower-ip-precedence } Specifies the action to be...
  • Page 389: Chapter 7 ACS Charging Action Configuration Mode CommandsChapter 7 ACS Charging Action Configuration Mode Commands The ACS Charging Action Configuration Mode is used to configure Active Charging...
  • Page 390 ACS Charging Action Configuration Mode Commands ▀ allocation-retention-priority allocation-retention-priority This command allows you to configure the Allocation Retention Priority...
  • Page 391ACS Charging Action Configuration Mode Commands allocation-retention-priority ▀ situation, a lower ARP flow may be dropped to free up capacity....
  • Page 392 ACS Charging Action Configuration Mode Commands ▀ billing-action billing-action This command allows you to configure the billing action for...
  • Page 393ACS Charging Action Configuration Mode Commands billing-action ▀ If this option is configured, the system generates an EDR immediately when...
  • Page 394 ACS Charging Action Configuration Mode Commands ▀ billing-action rf Enables Rf accounting. Rf accounting is applicable only for dynamic...
  • Page 395ACS Charging Action Configuration Mode Commands cca charging credit ▀ cca charging credit This command allows you to enable/disable Credit...
  • Page 396 ACS Charging Action Configuration Mode Commands ▀ cca charging credit Usage Use this command to configure RADIUS/Diameter Prepaid Credit...
  • Page 397ACS Charging Action Configuration Mode Commands charge-units ▀ charge-units This command allows you to configure the charge units for RADIUS/DCCA...
  • Page 398 ACS Charging Action Configuration Mode Commands ▀ charge-volume charge-volume This command allows you to configure how the volume amount...
  • Page 399ACS Charging Action Configuration Mode Commands charge-volume ▀  rtcp: Charge volume for RTCP  rtp: Charge volume for RTP...
  • Page 400 ACS Charging Action Configuration Mode Commands ▀ charge-volume Volume Description Volume amount downlink bytes Downlink RTP bytes Important: Whenever...
  • Page 401ACS Charging Action Configuration Mode Commands content-filtering processing server-group ▀ content-filtering processing server-group This command allows you to enable/disable Category-based...
  • Page 402 ACS Charging Action Configuration Mode Commands ▀ content-id content-id This command allows you to specify the content ID to...
  • Page 403ACS Charging Action Configuration Mode Commands deactivate-predefined-rule ▀ deactivate-predefined-rule This command allows you to configure the predefined rule to ensure...
  • Page 404 ACS Charging Action Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 405ACS Charging Action Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 406 ACS Charging Action Configuration Mode Commands ▀ flow action flow action This command allows you to specify the action...
  • Page 407ACS Charging Action Configuration Mode Commands flow action ▀ discard [ downlink | uplink ] Specifies to discard the specified...
  • Page 408 ACS Charging Action Configuration Mode Commands ▀ flow action Specifies the round-robin approach to select the server list from...
  • Page 409ACS Charging Action Configuration Mode Commands flow action ▀  #BEARER.ACCT-SESSION-ID#  #BEARER.CORRELATION-ID#  #BEARER.RULEBASE#  #BEARER.SERVED-BSA-ADDR#  #BEARER.SERVICE-NAME# ...
  • Page 410 ACS Charging Action Configuration Mode Commands ▀ flow action Note that encryption is supported only for the following fields:...
  • Page 411ACS Charging Action Configuration Mode Commands flow action ▀ terminate-session Specifies to terminate the session. When a rule pointing to...
  • Page 412 ACS Charging Action Configuration Mode Commands ▀ flow action Most of the header fields are copied directly from the...
  • Page 413ACS Charging Action Configuration Mode Commands flow idle-timeout ▀ flow idle-timeout This command allows you to configure the maximum duration...
  • Page 414 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-bandwidth flow limit-for-bandwidth For Session Control functionality this command allows you...
  • Page 415ACS Charging Action Configuration Mode Commands flow limit-for-bandwidth ▀ Important: It is recommended that this parameter be configured to at...
  • Page 416 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-bandwidth Usage Use this command to limit the bandwidth a subscriber...
  • Page 417ACS Charging Action Configuration Mode Commands flow limit-for-flow-type ▀ flow limit-for-flow-type This command allows you to specify the maximum number...
  • Page 418 ACS Charging Action Configuration Mode Commands ▀ flow limit-for-flow-type If the limit specified by the flow limit-across-applications command in...
  • Page 419ACS Charging Action Configuration Mode Commands ip tos ▀ ip tos This command allows you to configure the IP Type...
  • Page 420 ACS Charging Action Configuration Mode Commands ▀ ip tos downlink Specifies the ToS only for downlink packets. uplink Specifies...
  • Page 421ACS Charging Action Configuration Mode Commands ip vlan ▀ ip vlan This command allows you to configure the VLAN identifier...
  • Page 422 ACS Charging Action Configuration Mode Commands ▀ ip vlan The following command sets the IP VLAN range back to...
  • Page 423ACS Charging Action Configuration Mode Commands nexthop-forwarding-address ▀ nexthop-forwarding-address This command allows you to configure the nexthop forwarding address. Product...
  • Page 424 ACS Charging Action Configuration Mode Commands ▀ pco-custom1 pco-custom1 This command configures the Protocol Configuration Options (PCO) value that...
  • Page 425ACS Charging Action Configuration Mode Commands product-offer-id-avp ▀ product-offer-id-avp This command enables sending the “Product-Offer-ID” AVP with traffic identifier for...
  • Page 426 ACS Charging Action Configuration Mode Commands ▀ qos-class-identifier qos-class-identifier This command allows you to configure the QoS Class Identifier...
  • Page 427ACS Charging Action Configuration Mode Commands qos-renegotiate ▀ qos-renegotiate This command allows you to configure the QoS traffic class for...
  • Page 428 ACS Charging Action Configuration Mode Commands ▀ qos-renegotiate Usage Use this command to configure the QoS traffic class for...
  • Page 429ACS Charging Action Configuration Mode Commands retransmissions-counted ▀ retransmissions-counted This command allows you to specify whether to count (for billing...
  • Page 430 ACS Charging Action Configuration Mode Commands ▀ service-detection service-detection The service-detection session-update command enables the support for users’ QoS...
  • Page 431ACS Charging Action Configuration Mode Commands service-identifier ▀ service-identifier This command allows you to configure the service identifier to use...
  • Page 432 ACS Charging Action Configuration Mode Commands ▀ stripurl token stripurl token This command allows you to configure the token...
  • Page 433ACS Charging Action Configuration Mode Commands tft packet-filter ▀ tft packet-filter This command allows you to specify the packet filter...
  • Page 434 ACS Charging Action Configuration Mode Commands ▀ tft-notify-ue tft-notify-ue This command allows you to to control whether TFT updates...
  • Page 435ACS Charging Action Configuration Mode Commands tos ▀ tos This command allows you to configure the Type of Service (ToS)...
  • Page 436 ACS Charging Action Configuration Mode Commands ▀ tos uplink Specifies the ToS only for uplink packets. Usage Use this...
  • Page 437ACS Charging Action Configuration Mode Commands video bitrate ▀ video bitrate This command allows you to specify the default target...
  • Page 438 ACS Charging Action Configuration Mode Commands ▀ video cae-readdressing video cae-readdressing This command allows you to enable CAE (Content...
  • Page 439ACS Charging Action Configuration Mode Commands video detailed-statistics ▀ video detailed-statistics This command allows you to enable the collection of...
  • Page 440 ACS Charging Action Configuration Mode Commands ▀ video optimization-preprocessing all video optimization-preprocessing all This command allows you to enable...
  • Page 441ACS Charging Action Configuration Mode Commands video optimization-preprocessing cae-readdressing ▀ video optimization-preprocessing cae-readdressing This command allows you to enable CAE...
  • Page 442 ACS Charging Action Configuration Mode Commands ▀ video pacing by-policing video pacing by-policing This command allows you to enable...
  • Page 443ACS Charging Action Configuration Mode Commands video pacing by-policing ▀ -noconfirm Specifies that the command must execute without prompting for...
  • Page 444 ACS Charging Action Configuration Mode Commands ▀ xheader-insert xheader-insert This command allows you to specify the extension-header (x-header) format...
  • Page 445ACS Charging Action Configuration Mode Commands xheader-insert ▀ Note that if the value of the key is changed on the...
  • Page 446
  • Page 447: Chapter 8 ACS Configuration Mode CommandsChapter 8 ACS Configuration Mode Commands The ACS Configuration Mode is used to manage active charging service (ACS)/enhanced charging service...
  • Page 448 ACS Configuration Mode Commands ▀ accelerate-flow accelerate-flow This command allows you to create/configure/delete Flow Aware Packet Acceleration (FAPA) feature....
  • Page 449ACS Configuration Mode Commands access-ruledef ▀ access-ruledef This command allows you to create/configure/delete access rule definitions (ruledefs). Important: This command...
  • Page 450 ACS Configuration Mode Commands ▀ access-ruledef ruledef name must be unique within the service. Host pool, port map, IMSI...
  • Page 451ACS Configuration Mode Commands bandwidth-policy ▀ bandwidth-policy This command allows you to create/configure/delete bandwidth policies. Product ACS Privilege Security Administrator,...
  • Page 452 ACS Configuration Mode Commands ▀ bandwidth-policy bandwidth-policy test73 ▄ Command Line Interface Reference, StarOS Release 18 452
  • Page 453ACS Configuration Mode Commands buffering-limit ▀ buffering-limit This command allows you to configure packet buffering limits. Product ACS Privilege Security...
  • Page 454 ACS Configuration Mode Commands ▀ charging-action charging-action This command allows you to create/configure/delete ACS charging actions. Important: A maximum...
  • Page 455ACS Configuration Mode Commands charging-action ▀ Also see the ACS Charging Action Configuration Mode Commands chapter. Example The following command...
  • Page 456 ACS Configuration Mode Commands ▀ check-point accounting check-point accounting This command configures micro checkpoint syncup timer for ICSR and...
  • Page 457ACS Configuration Mode Commands check-point accounting ▀ This feature provides the operator with the flexibility to provision timer for accurate...
  • Page 458 ACS Configuration Mode Commands ▀ content-filtering category match-method content-filtering category match-method This command allows you to specify the match...
  • Page 459ACS Configuration Mode Commands content-filtering category policy-id ▀ content-filtering category policy-id This command allows you to create/configure/delete Content Filtering Category...
  • Page 460 ACS Configuration Mode Commands ▀ content-filtering category policy-id -noconfirm Specifies that the command must execute without prompting for confirmation....
  • Page 461ACS Configuration Mode Commands credit-control ▀ credit-control This command allows you to enable/disable Prepaid Credit Control Configuration Mode. Product All...
  • Page 462 ACS Configuration Mode Commands ▀ credit-control [context_name]hostname(config-dcca)# Also see the Credit Control Configuration Mode Commands chapter. Example The following...
  • Page 463ACS Configuration Mode Commands diameter credit-control ▀ diameter credit-control Description This command has been deprecated, and is replaced by the...
  • Page 464 ACS Configuration Mode Commands ▀ edr-format edr-format This command allows you to create/configure/delete ACS Event Data Record (EDR) formats....
  • Page 465ACS Configuration Mode Commands edr-format ▀ The following command creates an EDR format named edr_format1, and enters the EDR Format...
  • Page 466 ACS Configuration Mode Commands ▀ edr-ipproto-port-map edr-ipproto-port-map This command enables IP protocol and server port mapping for Event Data...
  • Page 467ACS Configuration Mode Commands edr-udr-flow-control ▀ edr-udr-flow-control This command allows you to enable/disable flow control between Session Managers (SessMgrs) and...
  • Page 468 ACS Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 469ACS Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 470 ACS Configuration Mode Commands ▀ fair-usage deact-margin fair-usage deact-margin This command allows you to configure the deactivate margin for...
  • Page 471ACS Configuration Mode Commands fair-usage deact-margin ▀ fair-usage deact-margin 10 Command Line Interface Reference, StarOS Release 18 ▄ 471
  • Page 472 ACS Configuration Mode Commands ▀ fair-usage tcp-proxy fair-usage tcp-proxy This command allows you to configure the maximum number of...
  • Page 473ACS Configuration Mode Commands fair-usage threshold-percent ▀ fair-usage threshold-percent This command allows you to configure the usage threshold to start...
  • Page 474 ACS Configuration Mode Commands ▀ fair-usage threshold-percent The following command enables the Fair Usage feature, and configures the session...
  • Page 475ACS Configuration Mode Commands firewall dos-protection flooding ▀ firewall dos-protection flooding This command is configured to protect servers from mobile...
  • Page 476 ACS Configuration Mode Commands ▀ firewall dos-protection flooding packet limit packet_limit Specifies the maximum number of packets allowed during...
  • Page 477ACS Configuration Mode Commands firewall dos-protection ip-sweep ▀ firewall dos-protection ip-sweep This command is configured to detect Source IP-based flooding...
  • Page 478 ACS Configuration Mode Commands ▀ firewall dos-protection ip-sweep packet limit packet_limit Specifies the maximum number of packets allowed during...
  • Page 479ACS Configuration Mode Commands firewall flow-recovery ▀ firewall flow-recovery This command allows you to configure the Stateful Firewall’s Flow Recovery...
  • Page 480 ACS Configuration Mode Commands ▀ firewall flow-recovery Important: NAT flows will not be recovered. Example The following command configures...
  • Page 481ACS Configuration Mode Commands firewall license ▀ firewall license This command allows you to configure the license related parameters for...
  • Page 482 ACS Configuration Mode Commands ▀ firewall max-ip-packet-size firewall max-ip-packet-size Description In StarOS 8.1 and later releases, for Rulebase-based Stateful...
  • Page 483ACS Configuration Mode Commands firewall mime-flood ▀ firewall mime-flood Description In StarOS 8.1 and later releases, for Rulebase-based Stateful Firewall...
  • Page 484 ACS Configuration Mode Commands ▀ firewall nat-alg firewall nat-alg This command enables/disables Network Address Translation (NAT) Application Level Gateways...
  • Page 485ACS Configuration Mode Commands firewall nat-alg ▀ ipv4-and-ipv6 | ipv4-only | ipv6-only Specifies to enable/disable NAT44/NAT64 ALG.  ipv4-and-ipv6: Enables...
  • Page 486 ACS Configuration Mode Commands ▀ firewall no-ruledef-matches firewall no-ruledef-matches Description In StarOS 8.1 and later releases, this command is...
  • Page 487ACS Configuration Mode Commands firewall port-scan ▀ firewall port-scan This command allows you to configure Stateful Firewall’s Port Scan Detection...
  • Page 488 ACS Configuration Mode Commands ▀ firewall port-scan  tcp: Specifies response timeout for TCP. response_timeout must be an integer...
  • Page 489ACS Configuration Mode Commands firewall protect-servers ▀ firewall protect-servers This command is configured to protect ISP servers from mobile space...
  • Page 490 ACS Configuration Mode Commands ▀ firewall protect-servers The following command is configured to protect all servers within a Firewall-and-NAT...
  • Page 491ACS Configuration Mode Commands firewall ruledef ▀ firewall ruledef This command allows you to create/configure/delete Stateful Firewall ruledefs. Important: This...
  • Page 492 ACS Configuration Mode Commands ▀ firewall ruledef Important: The Stateful Firewall ruledefs are different from the ACS ruledefs. Also...
  • Page 493ACS Configuration Mode Commands firewall tcp-syn-flood-intercept ▀ firewall tcp-syn-flood-intercept Description In StarOS 8.1 and later releases, for Rulebase-based Stateful Firewall...
  • Page 494 ACS Configuration Mode Commands ▀ firewall track-list firewall track-list This command allows you to configure the maximum number of...
  • Page 495ACS Configuration Mode Commands fw-and-nat action ▀ fw-and-nat action This command allows you to create/configure/delete Firewall-and-NAT actions. Important: This command...
  • Page 496 ACS Configuration Mode Commands ▀ fw-and-nat action fw-and-nat action test1 ▄ Command Line Interface Reference, StarOS Release 18 496...
  • Page 497ACS Configuration Mode Commands fw-and-nat policy ▀ fw-and-nat policy This command allows you to create/configure/delete Firewall-and-NAT policies. Important: This command...
  • Page 498 ACS Configuration Mode Commands ▀ fw-and-nat policy [context_name]hostname(config-fw-and-nat-policy)# Also see the Firewall-and-NAT Policy Configuration Mode Commands chapter. Example The...
  • Page 499ACS Configuration Mode Commands group-of-objects ▀ group-of-objects This command allows you to create/configure/delete an ACS group-of-objects. Important: This command is...
  • Page 500 ACS Configuration Mode Commands ▀ group-of-objects string Specifies the data type as string. When creating a group, specifying the...
  • Page 501ACS Configuration Mode Commands group-of-prefixed-urls ▀ group-of-prefixed-urls This command allows you to create/configure/delete an ACS group-of-prefixed-URLs. Important: This command is...
  • Page 502 ACS Configuration Mode Commands ▀ group-of-prefixed-urls Example The following command creates group-of-prefixed-urls named test5, and enters the ACS Group-of-...
  • Page 503ACS Configuration Mode Commands group-of-ruledefs ▀ group-of-ruledefs This command allows you to create/configure/delete an ACS group-of-ruledefs. Important: In 14.1 and...
  • Page 504 ACS Configuration Mode Commands ▀ group-of-ruledefs The following command creates a group-of-ruledefs named group1, and enters the ACS Group-of-Ruledefs...
  • Page 505ACS Configuration Mode Commands h323 time-to-live ▀ h323 time-to-live This command allows you to configure the time period for which...
  • Page 506 ACS Configuration Mode Commands ▀ h323 timeout h323 timeout This command allows you to configure the timeout intervals for...
  • Page 507ACS Configuration Mode Commands h323 timeout ▀ unregistration unregistration_timeout Configures the timeout value for the unregistration request message sent to...
  • Page 508 ACS Configuration Mode Commands ▀ h323 tpkt h323 tpkt This command allows you to configure the maximum size of...
  • Page 509ACS Configuration Mode Commands h323 version ▀ h323 version This command allows you to configure the H.323 version number supported...
  • Page 510 ACS Configuration Mode Commands ▀ host-pool host-pool This command allows you to create/configure/delete host pools. Product All Privilege Security...
  • Page 511ACS Configuration Mode Commands host-pool ▀ Also see the ACS Host Pool Configuration Mode Commands chapter. Example The following command...
  • Page 512 ACS Configuration Mode Commands ▀ idle-timeout idle-timeout This command allows you to configure the maximum duration a flow can...
  • Page 513ACS Configuration Mode Commands idle-timeout ▀ If the Flow Mapping timer is disabled, then the Mapping timeout will not get...
  • Page 514 ACS Configuration Mode Commands ▀ imsi-pool imsi-pool This command allows you to create/configure/delete International Mobile Subscriber Identity (IMSI) pools....
  • Page 515ACS Configuration Mode Commands imsi-pool ▀ Also see the ACS IMSI Pool Configuration Mode Commands chapter. Example The following command...
  • Page 516 ACS Configuration Mode Commands ▀ ip dns-learnt-entries ip dns-learnt-entries This command allows you to configure how long to keep...
  • Page 517ACS Configuration Mode Commands ip dns-learnt-entries ▀ ip dns-learnt-entries timeout 900 Command Line Interface Reference, StarOS Release 18 ▄ 517...
  • Page 518 ACS Configuration Mode Commands ▀ ip max-fragments ip max-fragments This command allows you to limit the maximum number of...
  • Page 519ACS Configuration Mode Commands label content-id ▀ label content-id This command allows you to specify a label (text string) to...
  • Page 520 ACS Configuration Mode Commands ▀ nat allocation-failure nat allocation-failure This command allows you to configure the action to take...
  • Page 521ACS Configuration Mode Commands nat allocation-in-progress ▀ nat allocation-in-progress This command allows you to configure the action to take on...
  • Page 522 ACS Configuration Mode Commands ▀ nat ip downlink reassembly-timeout nat ip downlink reassembly-timeout This command configures the downlink IP...
  • Page 523ACS Configuration Mode Commands nat tcp-2msl-timeout ▀ nat tcp-2msl-timeout This command allows you to configure the TCP 2MSL (Maximum Segment...
  • Page 524 ACS Configuration Mode Commands ▀ nat unsolicited-pkts nat unsolicited-pkts This command allows you to configure unsolicited packets. Product ACS...
  • Page 525ACS Configuration Mode Commands p2p-detection attribute ▀ p2p-detection attribute This command enables or disables the detection of SSL renegotiation flows....
  • Page 526 ACS Configuration Mode Commands ▀ p2p-detection attribute p2p-detection attribute ssl-renegotiation max-entry-per-sessmgr 40000 id- reduce-factor 4 ▄ Command Line Interface...
  • Page 527ACS Configuration Mode Commands p2p-detection behavioral ▀ p2p-detection behavioral This command enables or disables behavioral detection for unidentified traffic. Product...
  • Page 528 ACS Configuration Mode Commands ▀ p2p-detection ecs-analysis p2p-detection ecs-analysis This command enables or disables ECS analysis for analyzers —...
  • Page 529ACS Configuration Mode Commands p2p-detection ecs-analysis ▀ p2p-detection ecs-analysis ftp Command Line Interface Reference, StarOS Release 18 ▄ 529
  • Page 530 ACS Configuration Mode Commands ▀ p2p-detection protocol p2p-detection protocol This command enables/disables the detection of all or specified peer-to-peer...
  • Page 531ACS Configuration Mode Commands p2p-detection protocol ▀ no If previously enabled, disables the detection of the specific peer-to-peer protocol. all...
  • Page 532 ACS Configuration Mode Commands ▀ p2p-detection protocol armagettron Specifies to detect Armagetron protocol. avi Specifies to detect AVI protocol....
  • Page 533ACS Configuration Mode Commands p2p-detection protocol ▀ citrix Specifies to detect Citrix Independent Computing Architecture (ICA) protocol. clubbox Specifies to...
  • Page 534 ACS Configuration Mode Commands ▀ p2p-detection protocol Important: The facetime protocol option is available only in 9.0 and in...
  • Page 535ACS Configuration Mode Commands p2p-detection protocol ▀ gamekit Specifies to detect GameKit protocol. Important: The gamekit protocol option is available...
  • Page 536 ACS Configuration Mode Commands ▀ p2p-detection protocol hbogo Specifies to detect HBO Go protocol. heytell Specifies to detect HeyTell...
  • Page 537ACS Configuration Mode Commands p2p-detection protocol ▀ imessage Specifies to detect iMessage protocol. imgur Specifies to detect Imgur protocol. imo...
  • Page 538 ACS Configuration Mode Commands ▀ p2p-detection protocol kik-messenger Specifies to detect Kik Messenger protocol. kontiki Specifies to detect Kontiki...
  • Page 539ACS Configuration Mode Commands p2p-detection protocol ▀ monkey3 Specifies to detect Monkey3 protocol. mozy Specifies to detect Mozy protocol. msn...
  • Page 540 ACS Configuration Mode Commands ▀ p2p-detection protocol off Specifies to detect Off-The-Record protocol. ogg Specifies to detect Ogg multimedia...
  • Page 541ACS Configuration Mode Commands p2p-detection protocol ▀ pcanywhere Specifies to detect PCAnywhere protocol. pinterest Specifies to detect Pinterest protocol. plingm...
  • Page 542 ACS Configuration Mode Commands ▀ p2p-detection protocol rdt Specifies to detect Real Data Transport (RDT) protocol. regram Specifies to...
  • Page 543ACS Configuration Mode Commands p2p-detection protocol ▀ skype Specifies to detect Skype protocol. slacker-radio Specifies to detect Slacker Radio protocol....
  • Page 544 ACS Configuration Mode Commands ▀ p2p-detection protocol ssl Specifies to detect SSL Protocol. stealthnet Specifies to detect StealthNet RShare...
  • Page 545ACS Configuration Mode Commands p2p-detection protocol ▀ truphone Specifies to detect Truphone WiFi VoIP protocol. tumblr Specifies to detect Tumblr...
  • Page 546 ACS Configuration Mode Commands ▀ p2p-detection protocol vessel Specifies to detect Vessel protocol. viber Specifies to detect Viber VoIP...
  • Page 547ACS Configuration Mode Commands p2p-detection protocol ▀ wii Specifies to detect Wii Remote Bluetooth protocol. windows-azure Specifies to detect Windows...
  • Page 548 ACS Configuration Mode Commands ▀ p2p-detection protocol yourfreetunnel Specifies to detect your free Tunnel chat protocol. youtube Specifies to...
  • Page 549ACS Configuration Mode Commands packet-filter ▀ packet-filter This command allows you to create/configure/delete ACS packet filters. Product ACS Privilege Security...
  • Page 550 ACS Configuration Mode Commands ▀ passive-mode passive-mode This command allows you to configure the Active Charging Service to operate...
  • Page 551ACS Configuration Mode Commands pcp-service ▀ pcp-service Creates or deletes a Port Control Protocol (PCP) service. Important: This command is...
  • Page 552 ACS Configuration Mode Commands ▀ pcp-service pcp-service pcp1 ▄ Command Line Interface Reference, StarOS Release 18 552
  • Page 553ACS Configuration Mode Commands policy-control bearer-bw-limit ▀ policy-control bearer-bw-limit This command allows you to enable/disable per-bearer MBR policing—bandwidth limiting. Product...
  • Page 554 ACS Configuration Mode Commands ▀ policy-control bind-default-bearer policy-control bind-default-bearer For PCEF Bearer Binding in 3G and when BCM mode...
  • Page 555ACS Configuration Mode Commands policy-control bind-default-bearer ▀ Important: This CLI is applicable to all the rulebases in the chassis configuration....
  • Page 556 ACS Configuration Mode Commands ▀ policy-control burst-size policy-control burst-size This command allows you to configure the burst size for...
  • Page 557ACS Configuration Mode Commands policy-control charging-action-override ▀ policy-control charging-action-override This command has been removed from the ACS Configuration Mode, and...
  • Page 558 ACS Configuration Mode Commands ▀ policy-control charging-rule-base-name policy-control charging-rule-base-name This command allows you to configure how the Charging-Rule-Base-Name AVP...
  • Page 559ACS Configuration Mode Commands policy-control charging-rule-base-name ▀ use-first: If multiple Charging-Rule-Base-Name are received from the PCRF, since a call can...
  • Page 560 ACS Configuration Mode Commands ▀ policy-control dynamic-rule-limit policy-control dynamic-rule-limit This command allows you to enable/disable per-dynamic-rule MBR policing—bandwidth limiting....
  • Page 561ACS Configuration Mode Commands policy-control retransmissions-counted ▀ policy-control retransmissions-counted This command allows you to enable/disable charging of retransmitted packets when...
  • Page 562 ACS Configuration Mode Commands ▀ policy-control update-default-bearer policy-control update-default-bearer For PCEF Bearer Binding in 4G, this command allows you...
  • Page 563ACS Configuration Mode Commands policy-control update-default-bearer ▀ Important: This CLI is applicable to all the rulebases in the chassis configuration....
  • Page 564 ACS Configuration Mode Commands ▀ port-map port-map This command allows you to create/configure/delete port maps. Product All Privilege Security...
  • Page 565ACS Configuration Mode Commands port-map ▀ The following command creates a port map named portmap1, and enters the ACS Port...
  • Page 566 ACS Configuration Mode Commands ▀ qos-group-of-ruledefs qos-group-of-ruledefs This command allows you to create/configure/delete a qos-group-of-ruledefs. Product ACS Privilege Security...
  • Page 567ACS Configuration Mode Commands qos-group-of-ruledefs ▀ The following command creates a qos-group-of-ruledefs named group1, and enters the ACS QoS-Group-of- Ruledefs...
  • Page 568 ACS Configuration Mode Commands ▀ radio-congestion radio-congestion This command allows you to create/configure/delete Radio Congestion policy. Product MVG Privilege...
  • Page 569ACS Configuration Mode Commands readdress-server-list ▀ readdress-server-list This command allows you to create/delete server list for DNS redirection. Important: This...
  • Page 570 ACS Configuration Mode Commands ▀ readdress-server-list The following command creates a charging action named homeDNSserver and changes to the...
  • Page 571ACS Configuration Mode Commands redirect user-agent ▀ redirect user-agent This command allows you to specify the user agent for conditional...
  • Page 572 ACS Configuration Mode Commands ▀ rulebase rulebase This command allows you to create/configure/delete ACS rulebases. Important: A maximum of...
  • Page 573ACS Configuration Mode Commands rulebase ▀ The following command creates a rulebase named test1, and enters the ACS Rulebase Configuration...
  • Page 574 ACS Configuration Mode Commands ▀ rulebase-list rulebase-list This command allows you to create and delete ACS rulebase lists. Product...
  • Page 575ACS Configuration Mode Commands rulebase-list ▀ rulebase-list rblist rulebase1 rulebase3 rulebase5 The following command deletes the rulebase list named rblist:...
  • Page 576 ACS Configuration Mode Commands ▀ ruledef ruledef This command allows you to create/configure/delete ACS rule definitions. Important: A maximum...
  • Page 577ACS Configuration Mode Commands ruledef ▀ A ruledef represents a set of matching conditions across multiple L3 – L7 protocol...
  • Page 578 ACS Configuration Mode Commands ▀ sip advanced sip advanced This command enables SIP ALG to maintain the same tag...
  • Page 579ACS Configuration Mode Commands statistics-collection ▀ statistics-collection This command allows to dynamically enable collection of Charging, Firewall or Post-processing ruledef...
  • Page 580 ACS Configuration Mode Commands ▀ statistics-collection charging sessions full CLI — “statistics collection disabled; not collecting <charging/firewall/postprocessing> ruledef stats”....
  • Page 581ACS Configuration Mode Commands system-limit l4-flows ▀ system-limit l4-flows This command allows you to configure the system-wide Layer 4 flow...
  • Page 582 ACS Configuration Mode Commands ▀ system-limit l4-flows processing a successive flow-usage update from active charging service a change in...
  • Page 583ACS Configuration Mode Commands tethering-database ▀ tethering-database This command allows you to enable/disable the Tethering Detection feature, and load the...
  • Page 584 ACS Configuration Mode Commands ▀ tethering-database ua-signature ua_signature_db_file_name Specifies the User Agent (UA) Signature database file to load. ua_signature_db_file_name...
  • Page 585ACS Configuration Mode Commands timedef ▀ timedef This command allows you to create/configure/delete ACS Time Definitions (timedefs). Important: This command...
  • Page 586 ACS Configuration Mode Commands ▀ timedef [context_name]hostname(config-acs-timedef)# Also see the ACS Timedef Configuration Mode Commands chapter. Example The following...
  • Page 587ACS Configuration Mode Commands udr-format ▀ udr-format This command allows you to create/configure/delete a User Data Record (UDR) format. Important:...
  • Page 588 ACS Configuration Mode Commands ▀ udr-format udr-format udr_format1 ▄ Command Line Interface Reference, StarOS Release 18 588
  • Page 589ACS Configuration Mode Commands url-blacklisting match-method ▀ url-blacklisting match-method This command allows you to specify the match method to look...
  • Page 590 ACS Configuration Mode Commands ▀ xheader-format xheader-format This command allows you to create/configure/delete ACS extension-header (x-header) format specifications. Product...
  • Page 591ACS Configuration Mode Commands xheader-format ▀ xheader-format test Command Line Interface Reference, StarOS Release 18 ▄ 591
  • Page 592
  • Page 593: Chapter 9 ACS Group-of-Objects Configuration Mode CommandsChapter 9 ACS Group-of-Objects Configuration Mode Commands The ACS Group-of-Objects Configuration Mode is used to configure groups of Active Charging...
  • Page 594 ACS Group-of-Objects Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 595ACS Group-of-Objects Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 596 ACS Group-of-Objects Configuration Mode Commands ▀ member-object member-object This command allows you to add or remove objects from the...
  • Page 597: Chapter 10 ACS Group-of-Prefixed-URLs Configuration Mode CommandsChapter 10 ACS Group-of-Prefixed-URLs Configuration Mode Commands The ACS Group-of-Prefixed-URLs Configuration Mode is used to create and configure groups of...
  • Page 598 ACS Group-of-Prefixed-URLs Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 599ACS Group-of-Prefixed-URLs Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 600 ACS Group-of-Prefixed-URLs Configuration Mode Commands ▀ prefixed-url prefixed-url This command allows you to add or remove URLs from the...
  • Page 601: Chapter 11 ACS Group-of-Ruledefs Configuration Mode CommandsChapter 11 ACS Group-of-Ruledefs Configuration Mode Commands The ACS Group-of-Ruledefs Configuration Mode is used to configure groups of rule definitions...
  • Page 602 ACS Group-of-Ruledefs Configuration Mode Commands ▀ add-ruledef add-ruledef This command allows you to add or remove ruledefs from a...
  • Page 603ACS Group-of-Ruledefs Configuration Mode Commands add-ruledef ▀ add-ruledef priority 3 ruledef ruledef23 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 604 ACS Group-of-Ruledefs Configuration Mode Commands ▀ dynamic-command dynamic-command This command allows you to add or remove dynamic commands from...
  • Page 605ACS Group-of-Ruledefs Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 606 ACS Group-of-Ruledefs Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 607ACS Group-of-Ruledefs Configuration Mode Commands group-of-ruledefs-application ▀ group-of-ruledefs-application This command allows you to specify the purpose of setting up a...
  • Page 608 ACS Group-of-Ruledefs Configuration Mode Commands ▀ group-of-ruledefs-application Usage Use this command to specify the purpose of setting up a...
  • Page 609: Chapter 12 ACS Host Pool Configuration Mode CommandsChapter 12 ACS Host Pool Configuration Mode Commands The ACS Host Pool Configuration Mode is used to define a pool...
  • Page 610 ACS Host Pool Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 611ACS Host Pool Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 612 ACS Host Pool Configuration Mode Commands ▀ ip ip This command allows you to add/remove an individual or a...
  • Page 613ACS Host Pool Configuration Mode Commands ip ▀ ip range 10.2.3.4 to 10.4.5.6 Command Line Interface Reference, StarOS Release 18...
  • Page 614
  • Page 615: Chapter 13 ACS IMSI Pool Configuration Mode CommandsChapter 13 ACS IMSI Pool Configuration Mode Commands The ACS IMSI Pool Configuration Mode is used to define a pool...
  • Page 616 ACS IMSI Pool Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 617ACS IMSI Pool Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 618 ACS IMSI Pool Configuration Mode Commands ▀ imsi imsi This command allows you to add/remove an individual or a...
  • Page 619: Chapter 14 ACS Packet Filter Configuration Mode CommandsChapter 14 ACS Packet Filter Configuration Mode Commands The ACS Packet Filter Configuration Mode is used to create and configure...
  • Page 620 ACS Packet Filter Configuration Mode Commands ▀ direction direction This command allows you to specify the direction in which...
  • Page 621ACS Packet Filter Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 622 ACS Packet Filter Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 623ACS Packet Filter Configuration Mode Commands ip local-port ▀ ip local-port This command allows you to configure the IP 5-tuple...
  • Page 624 ACS Packet Filter Configuration Mode Commands ▀ ip protocol ip protocol This command allows you to configure the IP...
  • Page 625ACS Packet Filter Configuration Mode Commands ip protocol ▀ ip protocol = 300 Command Line Interface Reference, StarOS Release 18...
  • Page 626 ACS Packet Filter Configuration Mode Commands ▀ ip remote-address ip remote-address This command allows you to configure the IP...
  • Page 627ACS Packet Filter Configuration Mode Commands ip remote-address ▀ start_ipv4/ipv6_address/mask and end_ipv4/ipv6_address/mask specify, for the range, the starting and ending...
  • Page 628 ACS Packet Filter Configuration Mode Commands ▀ ip remote-port ip remote-port This command allows you to configure the IP...
  • Page 629ACS Packet Filter Configuration Mode Commands priority ▀ priority This command allows you to configure the current packet filter’s priority....
  • Page 630
  • Page 631: Chapter 15 ACS Port Map Configuration Mode CommandsChapter 15 ACS Port Map Configuration Mode Commands The ACS Port Map Configuration Mode is used to define an application-port...
  • Page 632 ACS Port Map Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 633ACS Port Map Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 634 ACS Port Map Configuration Mode Commands ▀ port port Adds or removes an individual or a range of TCP/UDP...
  • Page 635: Chapter 16 ACS QoS-Group-of-Ruledefs Configuration Mode CommandsChapter 16 ACS QoS-Group-of-Ruledefs Configuration Mode Commands The ACS QoS-Group-of-Ruledefs Configuration Mode is used to configure groups of rule definitions...
  • Page 636 ACS QoS-Group-of-Ruledefs Configuration Mode Commands ▀ add-group-of-ruledef add-group-of-ruledef This command allows you to add or remove groups-of-ruledefs from a...
  • Page 637ACS QoS-Group-of-Ruledefs Configuration Mode Commands add-ruledef ▀ add-ruledef This command allows you to add or remove ruledefs from a qos-group-of-ruledefs....
  • Page 638 ACS QoS-Group-of-Ruledefs Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 639ACS QoS-Group-of-Ruledefs Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 640
  • Page 641: Chapter 17 ACS Readdress Server List Configuration ModeChapter 17 ACS Readdress Server List Configuration Mode The ACS Readdress Server List Configuration Mode is used to add, configure,...
  • Page 642 ACS Readdress Server List Configuration Mode ▀ consecutive-failures consecutive-failures This command allows you to configure the consecutive number of...
  • Page 643ACS Readdress Server List Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 644 ACS Readdress Server List Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 645ACS Readdress Server List Configuration Mode reactivation-time ▀ reactivation-time This command allows you to configure the time duration (in seconds)...
  • Page 646 ACS Readdress Server List Configuration Mode ▀ response-timeout response-timeout This command allows you to configure the time duration for...
  • Page 647ACS Readdress Server List Configuration Mode server ▀ server This command allows you to configure the DNS server(s) to which...
  • Page 648 ACS Readdress Server List Configuration Mode ▀ server server 2607:f0d0:1002:51::4/64 The following command removes the DNS server configuration for...
  • Page 649: Chapter 18 ACS Rulebase Configuration Mode CommandsChapter 18 ACS Rulebase Configuration Mode Commands The ACS Rulebase Configuration Mode is used to configure Active Charging Service (ACS)...
  • Page 650 ACS Rulebase Configuration Mode Commands ▀ action priority action priority This command allows you to configure the action priority...
  • Page 651ACS Rulebase Configuration Mode Commands action priority ▀ Default: Disabled mute Disables application reporting to PCRF. This keyword is optional...
  • Page 652 ACS Rulebase Configuration Mode Commands ▀ action priority When a group-of-ruledefs is specified, if any of the ruledefs within...
  • Page 653ACS Rulebase Configuration Mode Commands active-charging rf ▀ active-charging rf This command allows you to enforce default rating group /...
  • Page 654 ACS Rulebase Configuration Mode Commands ▀ active-charging rf service_id must be an integer from 1 through 65535. Usage Use...
  • Page 655ACS Rulebase Configuration Mode Commands bandwidth default-policy ▀ bandwidth default-policy This command allows you to configure the default bandwidth policy...
  • Page 656 ACS Rulebase Configuration Mode Commands ▀ billing-records billing-records This command allows you to configure the type of billing to...
  • Page 657ACS Rulebase Configuration Mode Commands billing-records ▀ udr udr-format udr_format_name Generates UDRs with specified the format on the occurrence of...
  • Page 658 ACS Rulebase Configuration Mode Commands ▀ cca diameter requested-service-unit cca diameter requested-service-unit This command allows you to specify the...
  • Page 659ACS Rulebase Configuration Mode Commands cca diameter requested-service-unit ▀ Usage Use this command to include sub-AVPs based on time, volume,...
  • Page 660 ACS Rulebase Configuration Mode Commands ▀ cca quota cca quota This command allows you to configure various time- and...
  • Page 661ACS Rulebase Configuration Mode Commands cca quota ▀ This allows the immediately following chargeable user traffic to trip a quota...
  • Page 662 ACS Rulebase Configuration Mode Commands ▀ cca quota time-duration algorithm cca quota time-duration algorithm This command allows you to...
  • Page 663ACS Rulebase Configuration Mode Commands cca quota time-duration algorithm ▀ Default: 0 (disabled) The Continuous Time Periods (CTP) mechanism constructs...
  • Page 664 ACS Rulebase Configuration Mode Commands ▀ cca radius accounting interval cca radius accounting interval This command allows you to...
  • Page 665ACS Rulebase Configuration Mode Commands cca radius charging context ▀ cca radius charging context This command allows you to specify...
  • Page 666 ACS Rulebase Configuration Mode Commands ▀ cca radius user-password cca radius user-password This command allows you to configure the...
  • Page 667ACS Rulebase Configuration Mode Commands charging-action-override ▀ charging-action-override This command allows you to enable/disable overriding charging parameters of static rule...
  • Page 668 ACS Rulebase Configuration Mode Commands ▀ charging-action-override charging-action-override custom1 use-rule test ▄ Command Line Interface Reference, StarOS Release 18...
  • Page 669ACS Rulebase Configuration Mode Commands charging-rule-optimization ▀ charging-rule-optimization This command allows you to configure the internal optimization level to use,...
  • Page 670 ACS Rulebase Configuration Mode Commands ▀ charging-rule-optimization Both the high and medium options cause re-organization of the entire memory...
  • Page 671ACS Rulebase Configuration Mode Commands check-point accounting ▀ check-point accounting This command configures micro checkpoint syncup timer for ICSR and...
  • Page 672 ACS Rulebase Configuration Mode Commands ▀ check-point accounting This feature provides the operator with the flexibility to provision timer...
  • Page 673ACS Rulebase Configuration Mode Commands constituent-policies ▀ constituent-policies This command allows you to configure the Bandwidth, Content Based Billing (CBB),...
  • Page 674 ACS Rulebase Configuration Mode Commands ▀ constituent-policies fw-and-nat-policy fw_nat_policy_name Important: This keyword is customer specific, and is only available...
  • Page 675ACS Rulebase Configuration Mode Commands content-filtering category policy-id ▀ content-filtering category policy-id This command allows you to configure the Content...
  • Page 676 ACS Rulebase Configuration Mode Commands ▀ content-filtering category policy-id content-filtering category policy-id 101 ▄ Command Line Interface Reference, StarOS...
  • Page 677ACS Rulebase Configuration Mode Commands content-filtering flow-any-error ▀ content-filtering flow-any-error This command allows you to specify action to take on...
  • Page 678 ACS Rulebase Configuration Mode Commands ▀ content-filtering mode content-filtering mode This command allows you to enable/disable the specified Category-based...
  • Page 679ACS Rulebase Configuration Mode Commands content-filtering mode ▀ cf_server_group must be the name of a CFSG, and must be unique,...
  • Page 680 ACS Rulebase Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 681ACS Rulebase Configuration Mode Commands dynamic-rule order ▀ dynamic-rule order This command allows you to specify whether dynamic rules are...
  • Page 682 ACS Rulebase Configuration Mode Commands ▀ edr edr-dcca-fh edr edr-dcca-fh This command configures generation of EDRs when the OCS...
  • Page 683ACS Rulebase Configuration Mode Commands edr edr-dcca-fh ▀ Usage Use this command to configure the trigger to generate EDRs when...
  • Page 684 ACS Rulebase Configuration Mode Commands ▀ edr p2p edr p2p This command configures generation of Event Detail Records (EDR)...
  • Page 685ACS Rulebase Configuration Mode Commands edr p2p ▀ reporting-edr reporting_edr_format_name Specifies to generate reporting EDR for P2P events. reporting_edr_format_name must...
  • Page 686 ACS Rulebase Configuration Mode Commands ▀ edr nemo-call edr nemo-call This command enables/disables the NEMO feature for populating the...
  • Page 687ACS Rulebase Configuration Mode Commands edr nemo-call ▀ In 18.0 and later releases, ECS will see and analyze the inner...
  • Page 688 ACS Rulebase Configuration Mode Commands ▀ edr sn-charge-volume edr sn-charge-volume This command allows you to exclude/include packets/bytes that are...
  • Page 689ACS Rulebase Configuration Mode Commands edr suppress-zero-byte-records ▀ edr suppress-zero-byte-records This command disables/enables the creation of EDRs when there is...
  • Page 690 ACS Rulebase Configuration Mode Commands ▀ edr transaction-complete edr transaction-complete This command enables/disables the generation of an EDR on...
  • Page 691ACS Rulebase Configuration Mode Commands edr transaction-complete ▀ charging-edr charging_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 692 ACS Rulebase Configuration Mode Commands ▀ edr voip-call-end edr voip-call-end This command enables/disables generation of EDRs on the completion...
  • Page 693ACS Rulebase Configuration Mode Commands edr voip-call-end ▀ charging-edr charging_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 694 ACS Rulebase Configuration Mode Commands ▀ egcdr inactivity-meter egcdr inactivity-meter Description This command has been deprecated. It is included...
  • Page 695ACS Rulebase Configuration Mode Commands egcdr cdr-encoding ▀ egcdr cdr-encoding This command allows you to configure the eG-CDR encoding type....
  • Page 696 ACS Rulebase Configuration Mode Commands ▀ egcdr cdr-encoding egcdr cdr-encoding ascii delimiter comma ▄ Command Line Interface Reference, StarOS...
  • Page 697ACS Rulebase Configuration Mode Commands egcdr tariff ▀ egcdr tariff This command allows you to configure the eG-CDR tariff time...
  • Page 698 ACS Rulebase Configuration Mode Commands ▀ egcdr threshold egcdr threshold This command allows you to configure the thresholds for...
  • Page 699ACS Rulebase Configuration Mode Commands egcdr threshold ▀  total bytes: Specifies the limit for the total number of octets...
  • Page 700 ACS Rulebase Configuration Mode Commands ▀ egcdr time-duration algorithm egcdr time-duration algorithm This command allows you to specify the...
  • Page 701ACS Rulebase Configuration Mode Commands egcdr time-duration algorithm ▀ parking-meter seconds Specifies the Parking Meter (PM) period, in seconds. seconds...
  • Page 702 ACS Rulebase Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 703ACS Rulebase Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 704 ACS Rulebase Configuration Mode Commands ▀ extract-host-from-uri extract-host-from-uri This command allows you to configure whether to use the host...
  • Page 705ACS Rulebase Configuration Mode Commands extract-host-from-uri ▀ The following command configures extraction of host from URI for both HTTP and...
  • Page 706 ACS Rulebase Configuration Mode Commands ▀ firewall dos-protection firewall dos-protection This command allows you to configure Stateful Firewall protection...
  • Page 707ACS Rulebase Configuration Mode Commands firewall dos-protection ▀ ftp-bounce Enables protection against FTP Bounce attacks. In an FTP Bounce attack,...
  • Page 708 ACS Rulebase Configuration Mode Commands ▀ firewall dos-protection Usage Use this command to enable Stateful Firewall protection from different...
  • Page 709ACS Rulebase Configuration Mode Commands firewall flooding ▀ firewall flooding This command allows you to configure Stateful Firewall protection from...
  • Page 710 ACS Rulebase Configuration Mode Commands ▀ firewall flooding Usage Use this command to configure the maximum number of ICMP,...
  • Page 711ACS Rulebase Configuration Mode Commands firewall icmp-destination-unreachable-message-threshold ▀ firewall icmp-destination-unreachable-message-threshold This command allows you to configure a threshold on the...
  • Page 712 ACS Rulebase Configuration Mode Commands ▀ firewall icmp-destination-unreachable-message-threshold Example The following command configures a threshold of 10 ICMP error...
  • Page 713ACS Rulebase Configuration Mode Commands firewall max-ip-packet-size ▀ firewall max-ip-packet-size This command allows you to configure the maximum IP packet...
  • Page 714 ACS Rulebase Configuration Mode Commands ▀ firewall max-ip-packet-size The following command allows a maximum packet size of 60000 for...
  • Page 715ACS Rulebase Configuration Mode Commands firewall mime-flood ▀ firewall mime-flood This command allows you to configure Stateful Firewall protection from...
  • Page 716 ACS Rulebase Configuration Mode Commands ▀ firewall mime-flood Example The following command sets the maximum number of headers allowed...
  • Page 717ACS Rulebase Configuration Mode Commands firewall no-ruledef-matches ▀ firewall no-ruledef-matches This command allows you to configure the default action for...
  • Page 718 ACS Rulebase Configuration Mode Commands ▀ firewall no-ruledef-matches Optionally specify:  bypass-nat: Specifies to bypass Network Address Translation (NAT)....
  • Page 719ACS Rulebase Configuration Mode Commands firewall policy ▀ firewall policy This command allows you to enable/disable Stateful Firewall support for...
  • Page 720 ACS Rulebase Configuration Mode Commands ▀ firewall priority firewall priority This command allows you to add and specify the...
  • Page 721ACS Rulebase Configuration Mode Commands firewall priority ▀ deny [ charging-action charging_action_name ] Denies packets if the rule is matched....
  • Page 722 ACS Rulebase Configuration Mode Commands ▀ firewall priority Usage Use this command to add Stateful Firewall ruledefs to the...
  • Page 723ACS Rulebase Configuration Mode Commands firewall tcp-first-packet-non-syn ▀ firewall tcp-first-packet-non-syn This command allows you to configure the action to take...
  • Page 724 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-idle-timeout-action firewall tcp-idle-timeout-action This command allows you to configure the Stateful Firewall...
  • Page 725ACS Rulebase Configuration Mode Commands firewall tcp-reset-message-threshold ▀ firewall tcp-reset-message-threshold This command allows you to configure a threshold on the...
  • Page 726 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-reset-message-threshold firewall tcp-reset-message-threshold 10 then-block-server ▄ Command Line Interface Reference, StarOS Release...
  • Page 727ACS Rulebase Configuration Mode Commands firewall tcp-syn-flood-intercept ▀ firewall tcp-syn-flood-intercept This command allows you to configure the TCP intercept parameters...
  • Page 728 ACS Rulebase Configuration Mode Commands ▀ firewall tcp-syn-flood-intercept Default: none watch-timeout intercept_watch_timeout Specifies the TCP intercept watch timeout, in...
  • Page 729ACS Rulebase Configuration Mode Commands flow any-error ▀ flow any-error This command allows you to specify the charging action to...
  • Page 730 ACS Rulebase Configuration Mode Commands ▀ flow any-error For a packet dropped due to any error condition after data...
  • Page 731ACS Rulebase Configuration Mode Commands flow control-handshaking ▀ flow control-handshaking This command allows you to specify how to charge for...
  • Page 732 ACS Rulebase Configuration Mode Commands ▀ flow control-handshaking charge-separate-from-application Configures the charging action to separate the charging of the...
  • Page 733ACS Rulebase Configuration Mode Commands flow end-condition ▀ flow end-condition This command allows you to configure the end condition of...
  • Page 734 ACS Rulebase Configuration Mode Commands ▀ flow end-condition normal-end-signaling Creates an EDR with the specified EDR format whenever flow...
  • Page 735ACS Rulebase Configuration Mode Commands flow end-condition ▀ reporting-edr reporting_edr_format_name Important: This option is available only in 12.2 and later...
  • Page 736 ACS Rulebase Configuration Mode Commands ▀ flow limit-across-applications flow limit-across-applications This command allows you to limit the total number...
  • Page 737ACS Rulebase Configuration Mode Commands flow limit-across-applications ▀  UDP/ICMP: System waits for the flow timeout before updating the counter...
  • Page 738 ACS Rulebase Configuration Mode Commands ▀ flow rtsp-all-pkts flow rtsp-all-pkts This command allows you to delay charge packets in...
  • Page 739ACS Rulebase Configuration Mode Commands fw-and-nat default-policy ▀ fw-and-nat default-policy This command allows you to configure the default Firewall-and-NAT policy...
  • Page 740 ACS Rulebase Configuration Mode Commands ▀ http header-parse-limit http header-parse-limit This command allows you to configure the HTTP header...
  • Page 741ACS Rulebase Configuration Mode Commands http header-parse-limit ▀ For operators who have Stateful Firewall in-line service enabled, and are okay...
  • Page 742 ACS Rulebase Configuration Mode Commands ▀ ip reassembly-timeout ip reassembly-timeout This command allows you to configure how long to...
  • Page 743ACS Rulebase Configuration Mode Commands ip reset-tos ▀ ip reset-tos This command allows you to reset the IP Type of...
  • Page 744 ACS Rulebase Configuration Mode Commands ▀ nat binding-record nat binding-record This command allows you to configure NAT Binding Record...
  • Page 745ACS Rulebase Configuration Mode Commands nat binding-record ▀ + Indicates that more than one of the previous keywords can be...
  • Page 746 ACS Rulebase Configuration Mode Commands ▀ nat policy nat policy This command allows you to enable/disable Network Address Translation...
  • Page 747ACS Rulebase Configuration Mode Commands nat policy ▀ Important: Including the default NAT realm, a maximum of three NAT realms...
  • Page 748 ACS Rulebase Configuration Mode Commands ▀ nat suppress-aaa-update call-termination nat suppress-aaa-update call-termination This command allows you to suppress sending...
  • Page 749ACS Rulebase Configuration Mode Commands override-control ▀ override-control This command enables or disables Override Control feature. The Diameter capability exchange...
  • Page 750 ACS Rulebase Configuration Mode Commands ▀ override-control Important: In this release, both Inheritance and the Override Control features will...
  • Page 751ACS Rulebase Configuration Mode Commands p2p dynamic-flow-detection ▀ p2p dynamic-flow-detection This command allows you to enable/disable the P2P analyzer to...
  • Page 752 ACS Rulebase Configuration Mode Commands ▀ pcp service pcp service This command allows you to configure the PCP service...
  • Page 753ACS Rulebase Configuration Mode Commands post-processing dynamic ▀ post-processing dynamic This command allows you to specify ruledefs/group-of-ruledefs as dynamic post-processing...
  • Page 754 ACS Rulebase Configuration Mode Commands ▀ post-processing dynamic Usage Use this command to configure specific ruledefs/group-of-ruledefs as dynamic post-processing...
  • Page 755ACS Rulebase Configuration Mode Commands post-processing policy ▀ post-processing policy This command allows you to specify the post-processing policy to...
  • Page 756 ACS Rulebase Configuration Mode Commands ▀ post-processing policy configure active-charging service service1 ruledef http_low http any-match = TRUE cca...
  • Page 757ACS Rulebase Configuration Mode Commands post-processing priority ▀ post-processing priority This command allows you to configure the post-processing priority and...
  • Page 758 ACS Rulebase Configuration Mode Commands ▀ post-processing priority Important: The ruledef specified must be configured for post-processing. See the...
  • Page 759ACS Rulebase Configuration Mode Commands qos-renegotiate timeout ▀ qos-renegotiate timeout This command allows you to configure the timeout setting for...
  • Page 760 ACS Rulebase Configuration Mode Commands ▀ radius threshold radius threshold This command allows you to configure the interval and...
  • Page 761ACS Rulebase Configuration Mode Commands radius threshold ▀ radius threshold interval 600 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 762 ACS Rulebase Configuration Mode Commands ▀ retransmissions-counted retransmissions-counted This command allows to count retransmissions in all charging modules. Product...
  • Page 763ACS Rulebase Configuration Mode Commands ran bandwidth optimize ▀ ran bandwidth optimize This command is used to enable optimized calculation...
  • Page 764 ACS Rulebase Configuration Mode Commands ▀ ran bandwidth optimize By default, this CLI will be disabled. Any change in...
  • Page 765ACS Rulebase Configuration Mode Commands route priority ▀ route priority This command allows you to configure the routing of packets...
  • Page 766 ACS Rulebase Configuration Mode Commands ▀ route priority  h323: Route to H323 protocol analyzer.  http: Route to...
  • Page 767ACS Rulebase Configuration Mode Commands route priority ▀ description must be an alphanumeric string of 1 through 63 characters. Usage...
  • Page 768 ACS Rulebase Configuration Mode Commands ▀ route priority Analyzer Common ways to route to the analyzer tcp All IPv4...
  • Page 769ACS Rulebase Configuration Mode Commands rtp dynamic-flow-detection ▀ rtp dynamic-flow-detection This command allows you to enable/disable the Real Time Streaming...
  • Page 770 ACS Rulebase Configuration Mode Commands ▀ rtsp initial-bytes-limit rtsp initial-bytes-limit This command allows to set the maximum number of...
  • Page 771ACS Rulebase Configuration Mode Commands ruledef-parsing ▀ ruledef-parsing This command allows you to configure whether to consider or ignore the...
  • Page 772 ACS Rulebase Configuration Mode Commands ▀ tcp 2msl-timeout tcp 2msl-timeout This command allows you to configure how long to...
  • Page 773ACS Rulebase Configuration Mode Commands tcp check-window-size ▀ tcp check-window-size This command allows you to enable/disable TCP window-size checking. Product...
  • Page 774 ACS Rulebase Configuration Mode Commands ▀ tcp mss tcp mss This command allows you to configure the TCP Maximum...
  • Page 775ACS Rulebase Configuration Mode Commands tcp mss ▀ optional header is parsed. If TCP MSS is present in the optional...
  • Page 776 ACS Rulebase Configuration Mode Commands ▀ tcp out-of-order-timeout tcp out-of-order-timeout Description This command has been deprecated, and is replaced...
  • Page 777ACS Rulebase Configuration Mode Commands tcp packets-out-of-order ▀ tcp packets-out-of-order This command allows you to configure processing of TCP packets...
  • Page 778 ACS Rulebase Configuration Mode Commands ▀ tcp packets-out-of-order Important: On the outgoing interface, no in-sequence delivery is guaranteed. This...
  • Page 779ACS Rulebase Configuration Mode Commands tcp proxy-mode ▀ tcp proxy-mode This command allows you to enable/disable TCP Proxy mode for...
  • Page 780 ACS Rulebase Configuration Mode Commands ▀ tcp proxy-mode  nexthop-readdressing: Specifies that subscriber-initiated TCP flows be proxied if Nexthop...
  • Page 781ACS Rulebase Configuration Mode Commands tethering-detection ▀ tethering-detection This command allows you to enable/disable the Tethering Detection feature for the...
  • Page 782 ACS Rulebase Configuration Mode Commands ▀ tethering-detection Usage Use this command to enable/disable the Tethering Detection feature for a...
  • Page 783ACS Rulebase Configuration Mode Commands tft-notify-ue-def-bearer ▀ tft-notify-ue-def-bearer This command allows you to control whether TFT updates are sent to...
  • Page 784 ACS Rulebase Configuration Mode Commands ▀ timestamp rounding timestamp rounding This command allows you to enable/disable timestamp rounding in...
  • Page 785ACS Rulebase Configuration Mode Commands timestamp rounding ▀ Usage Use this command to configure the timestamp rounding setting. The specified...
  • Page 786 ACS Rulebase Configuration Mode Commands ▀ transactional-rule-matching transactional-rule-matching This command allows you to enable or disable transactional rule matching...
  • Page 787ACS Rulebase Configuration Mode Commands transactional-rule-matching ▀ alone. The keyword fastpath independently can no longer be used to turn on...
  • Page 788 ACS Rulebase Configuration Mode Commands ▀ transport-layer-checksum transport-layer-checksum This command allows you to enable/disable checksum verification for TCP and...
  • Page 789ACS Rulebase Configuration Mode Commands udr threshold ▀ udr threshold This command allows you to configure the threshold limit to...
  • Page 790 ACS Rulebase Configuration Mode Commands ▀ udr threshold bytes must be an integer from 100000 through 4000000000. Default: Disabled...
  • Page 791ACS Rulebase Configuration Mode Commands udr trigger ▀ udr trigger This command allows you to configure additional triggers for generating...
  • Page 792 ACS Rulebase Configuration Mode Commands ▀ udr trigger At the end of the “Tariff Time” period, the UDR files...
  • Page 793ACS Rulebase Configuration Mode Commands url-blacklisting action ▀ url-blacklisting action This command allows you to enable/disable URL Blacklisting functionality for...
  • Page 794 ACS Rulebase Configuration Mode Commands ▀ url-blacklisting action content-id content_id Usage Use this command to enable/disable URL Blacklisting at...
  • Page 795ACS Rulebase Configuration Mode Commands url-preprocessing ▀ url-preprocessing This command allows you to enable/disable a group-of-prefixed-urls for preprocessing of embedded...
  • Page 796 ACS Rulebase Configuration Mode Commands ▀ video optimization-preprocessing cae-readdressing video optimization-preprocessing cae-readdressing This command allows you to enable/disable CAE...
  • Page 797ACS Rulebase Configuration Mode Commands websocket flow-detection ▀ websocket flow-detection This command allows you to enable or disable websocket flow...
  • Page 798 ACS Rulebase Configuration Mode Commands ▀ wtp out-of-order-timeout wtp out-of-order-timeout Description This command has been deprecated, and is replaced...
  • Page 799ACS Rulebase Configuration Mode Commands wtp packets-out-of-order ▀ wtp packets-out-of-order This command allows you to configure how to process Wireless...
  • Page 800 ACS Rulebase Configuration Mode Commands ▀ wtp packets-out-of-order last. If all packets are not received, the packets will be...
  • Page 801ACS Rulebase Configuration Mode Commands xheader-encryption ▀ xheader-encryption This command allows you to configure X-Header Encryption feature’s parameters. Important: This...
  • Page 802 ACS Rulebase Configuration Mode Commands ▀ xheader-encryption Usage Use this command to configure the X-Header Encryption feature’s certificate and...
  • Page 803: Chapter 19 ACS Ruledef Configuration Mode CommandsChapter 19 ACS Ruledef Configuration Mode Commands The ACS Ruledef Configuration Mode is used to create and manage rule expressions...
  • Page 804 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp apn bearer 3gpp apn This command allows you to define rule...
  • Page 805ACS Ruledef Configuration Mode Commands bearer 3gpp apn ▀ Usage Use this command to define rule expressions to match an...
  • Page 806 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp imsi bearer 3gpp imsi This command allows you to define rule...
  • Page 807ACS Ruledef Configuration Mode Commands bearer 3gpp imsi ▀ The following command defines a rule expression to analyze user traffic...
  • Page 808 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp rat-type bearer 3gpp rat-type This command allows you to define rule...
  • Page 809ACS Ruledef Configuration Mode Commands bearer 3gpp sgsn-address ▀ bearer 3gpp sgsn-address This command allows you to define rule expressions...
  • Page 810 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp2 bsid bearer 3gpp2 bsid This command allows you to define rule...
  • Page 811ACS Ruledef Configuration Mode Commands bearer 3gpp2 bsid ▀ If the use-group-of-objects keyword is included in the command, string must...
  • Page 812 ACS Ruledef Configuration Mode Commands ▀ bearer 3gpp2 service-option bearer 3gpp2 service-option This command allows you to define rule...
  • Page 813ACS Ruledef Configuration Mode Commands bearer apn ▀ bearer apn This command allows you to define rule expressions to match...
  • Page 814 ACS Ruledef Configuration Mode Commands ▀ bearer apn apn_name must be the name of an APN, and must be...
  • Page 815ACS Ruledef Configuration Mode Commands bearer imsi ▀ bearer imsi This command allows you to define rule expressions to match...
  • Page 816 ACS Ruledef Configuration Mode Commands ▀ bearer imsi Usage Use this command to define rule expressions to match IMSI...
  • Page 817ACS Ruledef Configuration Mode Commands bearer rat-type ▀ bearer rat-type This command allows you to define rule expressions to match...
  • Page 818 ACS Ruledef Configuration Mode Commands ▀ bearer sgsn-address bearer sgsn-address This command allows you to define rule expressions to...
  • Page 819ACS Ruledef Configuration Mode Commands bearer traffic-group ▀ bearer traffic-group This command allows you to define rule expressions to match...
  • Page 820 ACS Ruledef Configuration Mode Commands ▀ bearer traffic-group bearer traffic-group >= 23 ▄ Command Line Interface Reference, StarOS Release...
  • Page 821ACS Ruledef Configuration Mode Commands cca quota-state ▀ cca quota-state Specifies the quota state of a subscriber for prepaid credit...
  • Page 822 ACS Ruledef Configuration Mode Commands ▀ cca quota-state The following command defines a rule expression to match user traffic...
  • Page 823ACS Ruledef Configuration Mode Commands cca redirect-indicator ▀ cca redirect-indicator This command allows you to define rule expressions to match...
  • Page 824 ACS Ruledef Configuration Mode Commands ▀ cca redirect-indicator that is returned by the RADIUS prepaid server for a quota...
  • Page 825ACS Ruledef Configuration Mode Commands copy-packet-to-log ▀ copy-packet-to-log This command allows you to print every packet that hits the current...
  • Page 826 ACS Ruledef Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 827ACS Ruledef Configuration Mode Commands dns answer-name ▀ dns answer-name This command allows you to define rule expressions to match...
  • Page 828 ACS Ruledef Configuration Mode Commands ▀ dns answer-name Usage Use this command to define rule expressions to match an...
  • Page 829ACS Ruledef Configuration Mode Commands dns any-match ▀ dns any-match This command allows you to define rule expressions to match...
  • Page 830 ACS Ruledef Configuration Mode Commands ▀ dns previous-state dns previous-state This command allows you to define rule expressions to...
  • Page 831ACS Ruledef Configuration Mode Commands dns query-name ▀ dns query-name This command allows you to define rule expressions to match...
  • Page 832 ACS Ruledef Configuration Mode Commands ▀ dns query-name Usage Use this command to define rule expressions to match query...
  • Page 833ACS Ruledef Configuration Mode Commands dns return-code ▀ dns return-code This command allows you to define rule expressions to match...
  • Page 834 ACS Ruledef Configuration Mode Commands ▀ dns state dns state This command allows you to define rule expressions to...
  • Page 835ACS Ruledef Configuration Mode Commands dns tid ▀ dns tid This command allows you to define rule expressions to match...
  • Page 836 ACS Ruledef Configuration Mode Commands ▀ email email This command allows you to define rule expressions to match generic...
  • Page 837ACS Ruledef Configuration Mode Commands email ▀ operator Specifies how to match. operator must be one of the following except...
  • Page 838 ACS Ruledef Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 839ACS Ruledef Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 840 ACS Ruledef Configuration Mode Commands ▀ file-transfer any-match file-transfer any-match This command allows you to define rule expressions to...
  • Page 841ACS Ruledef Configuration Mode Commands file-transfer chunk-number ▀ file-transfer chunk-number This command allows you to define rule expressions to match...
  • Page 842 ACS Ruledef Configuration Mode Commands ▀ file-transfer current-chunk-length file-transfer current-chunk-length This command allows you to define rule expressions to...
  • Page 843ACS Ruledef Configuration Mode Commands file-transfer declared-chunk-length ▀ file-transfer declared-chunk-length This command allows you to define rule expressions to match...
  • Page 844 ACS Ruledef Configuration Mode Commands ▀ file-transfer declared-file-size file-transfer declared-file-size This command allows you to define rule expressions to...
  • Page 845ACS Ruledef Configuration Mode Commands file-transfer filename ▀ file-transfer filename This command allows you to define rule expressions to match...
  • Page 846 ACS Ruledef Configuration Mode Commands ▀ file-transfer filename Usage Use this command to define rule expressions to match file...
  • Page 847ACS Ruledef Configuration Mode Commands file-transfer previous-state ▀ file-transfer previous-state This command allows you to define rule expressions to match...
  • Page 848 ACS Ruledef Configuration Mode Commands ▀ file-transfer state file-transfer state This command allows you to define rule expressions to...
  • Page 849ACS Ruledef Configuration Mode Commands file-transfer state ▀ Event init request-sent transfer- transfer- ok err HTTP 4xx or HTTP 5xx...
  • Page 850 ACS Ruledef Configuration Mode Commands ▀ file-transfer transferred-file-size file-transfer transferred-file-size This command allows you to define rule expressions to...
  • Page 851ACS Ruledef Configuration Mode Commands ftp any-match ▀ ftp any-match This command allows you to define rule expressions to match...
  • Page 852 ACS Ruledef Configuration Mode Commands ▀ ftp client-ip-address ftp client-ip-address This command allows you to define rule expressions to...
  • Page 853ACS Ruledef Configuration Mode Commands ftp client-port ▀ ftp client-port This command allows you to define rule expressions to match...
  • Page 854 ACS Ruledef Configuration Mode Commands ▀ ftp command args ftp command args This command allows you to define rule...
  • Page 855ACS Ruledef Configuration Mode Commands ftp command args ▀ Example The following command defines a rule expression to match argument...
  • Page 856 ACS Ruledef Configuration Mode Commands ▀ ftp command id ftp command id This command allows you to define rule...
  • Page 857ACS Ruledef Configuration Mode Commands ftp command name ▀ ftp command name This command allows you to define rule expressions...
  • Page 858 ACS Ruledef Configuration Mode Commands ▀ ftp command name  stor: Store command  stru: File structure command ...
  • Page 859ACS Ruledef Configuration Mode Commands ftp connection-type ▀ ftp connection-type This command allows you to define rule expressions to match...
  • Page 860 ACS Ruledef Configuration Mode Commands ▀ ftp data-any-match ftp data-any-match This command allows you to define rule expressions to...
  • Page 861ACS Ruledef Configuration Mode Commands ftp filename ▀ ftp filename This command allows you to define rule expressions to match...
  • Page 862 ACS Ruledef Configuration Mode Commands ▀ ftp filename Usage Use this command to define rule expressions to match an...
  • Page 863ACS Ruledef Configuration Mode Commands ftp pdu-length ▀ ftp pdu-length This command allows you to define rule expressions to match...
  • Page 864 ACS Ruledef Configuration Mode Commands ▀ ftp pdu-type ftp pdu-type This command allows you to define rule expressions to...
  • Page 865ACS Ruledef Configuration Mode Commands ftp previous-state ▀ ftp previous-state This command allows you to define rule expressions to match...
  • Page 866 ACS Ruledef Configuration Mode Commands ▀ ftp reply code ftp reply code This command allows you to define rule...
  • Page 867ACS Ruledef Configuration Mode Commands ftp server-ip-address ▀ ftp server-ip-address This command allows you to define rule expressions to match...
  • Page 868 ACS Ruledef Configuration Mode Commands ▀ ftp server-port ftp server-port This command allows you to define rule expressions to...
  • Page 869ACS Ruledef Configuration Mode Commands ftp session-length ▀ ftp session-length This command allows you to define rule expressions to match...
  • Page 870 ACS Ruledef Configuration Mode Commands ▀ ftp state ftp state This command allows you to define rule expressions to...
  • Page 871ACS Ruledef Configuration Mode Commands ftp url ▀ ftp url This command allows you to define rule expressions to match...
  • Page 872 ACS Ruledef Configuration Mode Commands ▀ ftp url Example The following command defines a rule expression to match the...
  • Page 873ACS Ruledef Configuration Mode Commands ftp user ▀ ftp user This command allows you to define rule expressions to match...
  • Page 874 ACS Ruledef Configuration Mode Commands ▀ ftp user Usage Use this command to define rule expressions to match a...
  • Page 875ACS Ruledef Configuration Mode Commands http any-match ▀ http any-match This command allows you to define rule expressions to match...
  • Page 876 ACS Ruledef Configuration Mode Commands ▀ http attribute-in-data http attribute-in-data This command allows you to define rule expressions to...
  • Page 877ACS Ruledef Configuration Mode Commands http attribute-in-data ▀ Usage Use this command to define rule expressions to match arbitrary attribute...
  • Page 878 ACS Ruledef Configuration Mode Commands ▀ http attribute-in-url http attribute-in-url This command allows you to define rule expressions to...
  • Page 879ACS Ruledef Configuration Mode Commands http attribute-in-url ▀ Usage Use this command to configure rule expression to match an arbitrary...
  • Page 880 ACS Ruledef Configuration Mode Commands ▀ http content disposition http content disposition This command allows you to define rule...
  • Page 881ACS Ruledef Configuration Mode Commands http content disposition ▀ Usage Use this command to define rule expressions to match optional...
  • Page 882 ACS Ruledef Configuration Mode Commands ▀ http content length http content length This command allows you to define rule...
  • Page 883ACS Ruledef Configuration Mode Commands http content range ▀ http content range This command allows you to define rule expressions...
  • Page 884 ACS Ruledef Configuration Mode Commands ▀ http content type http content type This command allows you to define rule...
  • Page 885ACS Ruledef Configuration Mode Commands http content type ▀ Usage Use this command to define rule expressions to match value...
  • Page 886 ACS Ruledef Configuration Mode Commands ▀ http cookie http cookie This command allows you to define rule expressions to...
  • Page 887ACS Ruledef Configuration Mode Commands http cookie ▀ The cookie match ruleline can be combined with other rulelines having different...
  • Page 888 ACS Ruledef Configuration Mode Commands ▀ http domain http domain This command allows you to define rule expressions to...
  • Page 889ACS Ruledef Configuration Mode Commands http domain ▀ From the URL, after http:// (if present) is removed, everything until the...
  • Page 890 ACS Ruledef Configuration Mode Commands ▀ http error http error This command allows you to define rule expressions to...
  • Page 891ACS Ruledef Configuration Mode Commands http error ▀ http error = TRUE Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 892 ACS Ruledef Configuration Mode Commands ▀ http first-request-packet http first-request-packet This command allows you to define rule expressions to...
  • Page 893ACS Ruledef Configuration Mode Commands http header-length ▀ http header-length This command allows you to define rule expressions to match...
  • Page 894 ACS Ruledef Configuration Mode Commands ▀ http host http host This command allows you to define rule expressions to...
  • Page 895 ACS Ruledef Configuration Mode Commands http host ▀ Usage Use this command to define rule expressions to match value in...
  • Page 896 ACS Ruledef Configuration Mode Commands ▀ http host Regex Character Description .\x## Any ASCII character as specified in two-digit...
  • Page 897ACS Ruledef Configuration Mode Commands http payload-length ▀ http payload-length This command allows you to define rule expressions to match...
  • Page 898 ACS Ruledef Configuration Mode Commands ▀ http pdu-length http pdu-length This command allows you to define rule expressions to...
  • Page 899ACS Ruledef Configuration Mode Commands http previous-state ▀ http previous-state This command allows you to define rule expressions to match...
  • Page 900 ACS Ruledef Configuration Mode Commands ▀ http referer http referer This command allows you to define rule expressions to...
  • Page 901 ACS Ruledef Configuration Mode Commands http referer ▀ Usage Use this command to define rule expressions to match value in...
  • Page 902 ACS Ruledef Configuration Mode Commands ▀ http referer Regex Character Description \\ Match the backslash character Bracketed range [0-...
  • Page 903ACS Ruledef Configuration Mode Commands http reply code ▀ http reply code This command allows you to define rule expressions...
  • Page 904 ACS Ruledef Configuration Mode Commands ▀ http reply payload http reply payload This command allows you to define rule...
  • Page 905ACS Ruledef Configuration Mode Commands http request method ▀ http request method This command allows you to define rule expressions...
  • Page 906 ACS Ruledef Configuration Mode Commands ▀ http request method The following command defines a rule expression to match user...
  • Page 907ACS Ruledef Configuration Mode Commands http session-length ▀ http session-length This command allows you to define rule expressions to match...
  • Page 908 ACS Ruledef Configuration Mode Commands ▀ http state http state This command allows you to define rule expressions to...
  • Page 909ACS Ruledef Configuration Mode Commands http transaction-length ▀ http transaction-length This command allows you to define rule expressions to match...
  • Page 910 ACS Ruledef Configuration Mode Commands ▀ http transaction-length Usage Use this command to define rule expressions to match an...
  • Page 911ACS Ruledef Configuration Mode Commands http transfer-encoding ▀ http transfer-encoding This command allows you to define rule expressions to match...
  • Page 912 ACS Ruledef Configuration Mode Commands ▀ http transfer-encoding Usage Use this command to define rule expressions to match the...
  • Page 913ACS Ruledef Configuration Mode Commands http uri ▀ http uri This command allows you to define rule expressions to match...
  • Page 914 ACS Ruledef Configuration Mode Commands ▀ http uri Usage Use this command to define rule expressions to match an...
  • Page 915 ACS Ruledef Configuration Mode Commands http uri ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 916 ACS Ruledef Configuration Mode Commands ▀ http url http url This command allows you to define rule expressions to...
  • Page 917 ACS Ruledef Configuration Mode Commands http url ▀ Hypertext Transfer Protocol GET / HTTP/1.1\r\n Request Method: GET Request URI: /...
  • Page 918 ACS Ruledef Configuration Mode Commands ▀ http url Regex Character Description \* Match the asterisk character \a Match the...
  • Page 919ACS Ruledef Configuration Mode Commands http user-agent ▀ http user-agent This command allows you to define rule expressions to match...
  • Page 920 ACS Ruledef Configuration Mode Commands ▀ http user-agent Usage Use this command to define rule expressions to match value...
  • Page 921ACS Ruledef Configuration Mode Commands http version ▀ http version This command allows you to define rule expressions to match...
  • Page 922 ACS Ruledef Configuration Mode Commands ▀ http version Usage Use this command to define rule expressions to match HTTP...
  • Page 923ACS Ruledef Configuration Mode Commands http x-header ▀ http x-header This command allows you to define rule expressions to match...
  • Page 924 ACS Ruledef Configuration Mode Commands ▀ http x-header Usage Use this command to define rule expressions to match specified...
  • Page 925ACS Ruledef Configuration Mode Commands icmp any-match ▀ icmp any-match This command allows you to define rule expressions to match...
  • Page 926 ACS Ruledef Configuration Mode Commands ▀ icmp code icmp code This command allows you to define rule expressions to...
  • Page 927ACS Ruledef Configuration Mode Commands icmp type ▀ icmp type This command allows you to define rule expressions to match...
  • Page 928 ACS Ruledef Configuration Mode Commands ▀ icmpv6 any-match icmpv6 any-match This command allows you to define rule expressions to...
  • Page 929ACS Ruledef Configuration Mode Commands icmpv6 code ▀ icmpv6 code This command allows you to define rule expressions to match...
  • Page 930 ACS Ruledef Configuration Mode Commands ▀ icmpv6 type icmpv6 type This command allows you to define rule expressions to...
  • Page 931ACS Ruledef Configuration Mode Commands if-protocol ▀ if-protocol This command allows you to associate different content IDs with the same...
  • Page 932 ACS Ruledef Configuration Mode Commands ▀ if-protocol Usage Use this command to associate different content IDs with the same...
  • Page 933ACS Ruledef Configuration Mode Commands imap any-match ▀ imap any-match This command allows you to define rule expressions to match...
  • Page 934 ACS Ruledef Configuration Mode Commands ▀ imap cc imap cc This command allows you to define rule expressions to...
  • Page 935ACS Ruledef Configuration Mode Commands imap cc ▀ Usage Use this command to define rule expressions to match recipient address...
  • Page 936 ACS Ruledef Configuration Mode Commands ▀ imap command imap command This command allows you to define rule expressions to...
  • Page 937ACS Ruledef Configuration Mode Commands imap command ▀  login  logout  lsub  noop  rename  search...
  • Page 938 ACS Ruledef Configuration Mode Commands ▀ imap content class imap content class This command allows you to define rule...
  • Page 939ACS Ruledef Configuration Mode Commands imap content class ▀ Usage Use this command to define rule expressions to match the...
  • Page 940 ACS Ruledef Configuration Mode Commands ▀ imap content type imap content type This command allows you to define rule...
  • Page 941ACS Ruledef Configuration Mode Commands imap content type ▀ Usage Use this command to define rule expressions to match the...
  • Page 942 ACS Ruledef Configuration Mode Commands ▀ imap date imap date This command allows you to define rule expressions to...
  • Page 943ACS Ruledef Configuration Mode Commands imap date ▀ Usage Use this command to define rule expressions to match the date...
  • Page 944 ACS Ruledef Configuration Mode Commands ▀ imap final-reply imap final-reply This command allows you to define rule expressions to...
  • Page 945ACS Ruledef Configuration Mode Commands imap from ▀ imap from This command allows you to define rule expressions to match...
  • Page 946 ACS Ruledef Configuration Mode Commands ▀ imap from Example The following command defines a rule expression to analyze user...
  • Page 947ACS Ruledef Configuration Mode Commands imap mail-size ▀ imap mail-size This command allows you to define rule expressions to match...
  • Page 948 ACS Ruledef Configuration Mode Commands ▀ imap mailbox-size imap mailbox-size This command allows you to define rule expressions to...
  • Page 949ACS Ruledef Configuration Mode Commands imap message-type ▀ imap message-type This command allows you to define rule expressions to match...
  • Page 950 ACS Ruledef Configuration Mode Commands ▀ imap previous-state imap previous-state This command allows you to define rule expressions to...
  • Page 951ACS Ruledef Configuration Mode Commands imap session-length ▀ imap session-length This command allows you to define rule expressions to match...
  • Page 952 ACS Ruledef Configuration Mode Commands ▀ imap session-previous-state imap session-previous-state This command allows you to define rule expressions to...
  • Page 953ACS Ruledef Configuration Mode Commands imap session-state ▀ imap session-state This command allows you to define rule expressions to match...
  • Page 954 ACS Ruledef Configuration Mode Commands ▀ imap state imap state This command allows you to define rule expressions to...
  • Page 955ACS Ruledef Configuration Mode Commands imap subject ▀ imap subject This command allows you to define rule expressions to match...
  • Page 956 ACS Ruledef Configuration Mode Commands ▀ imap subject Usage Use this command to define rule expressions to match “subject”...
  • Page 957ACS Ruledef Configuration Mode Commands imap to ▀ imap to This command allows you to define rule expressions to match...
  • Page 958 ACS Ruledef Configuration Mode Commands ▀ imap to Example The following command defines a rule expression to analyze user...
  • Page 959ACS Ruledef Configuration Mode Commands ip any-match ▀ ip any-match This command allows you to define rule expressions to match...
  • Page 960 ACS Ruledef Configuration Mode Commands ▀ ip dscp ip dscp This command enables you to configure a ruledef with...
  • Page 961ACS Ruledef Configuration Mode Commands ip downlink ▀ ip downlink This command allows you to define rule expressions to match...
  • Page 962 ACS Ruledef Configuration Mode Commands ▀ ip dst-address ip dst-address This command allows you to define rule expressions to...
  • Page 963ACS Ruledef Configuration Mode Commands ip dst-address ▀ Specifies a group of IPv6 addresses configured with wildcard input and/or specialized...
  • Page 964 ACS Ruledef Configuration Mode Commands ▀ ip error ip error This command allows you to define rule expressions to...
  • Page 965ACS Ruledef Configuration Mode Commands ip protocol ▀ ip protocol This command allows you to define rule expressions to match...
  • Page 966 ACS Ruledef Configuration Mode Commands ▀ ip protocol  udp Usage Use this command to define rule expressions to...
  • Page 967ACS Ruledef Configuration Mode Commands ip server-domain-name ▀ ip server-domain-name This command allows you to define rule expressions to match...
  • Page 968 ACS Ruledef Configuration Mode Commands ▀ ip server-ip-address ip server-ip-address This command allows you to define rule expressions to...
  • Page 969ACS Ruledef Configuration Mode Commands ip server-ip-address ▀ address-group ipv6_address Important: The address-group keyword can be configured only after the...
  • Page 970 ACS Ruledef Configuration Mode Commands ▀ ip src-address ip src-address This command allows you to define rule expressions to...
  • Page 971ACS Ruledef Configuration Mode Commands ip src-address ▀ Specifies a group of IPv6 addresses configured with wildcard input and/or specialized...
  • Page 972 ACS Ruledef Configuration Mode Commands ▀ ip subscriber-ip-address ip subscriber-ip-address This command allows you to define rule expressions to...
  • Page 973ACS Ruledef Configuration Mode Commands ip subscriber-ip-address ▀ address-group ipv6_address Important: The address-group keyword can be configured only after the...
  • Page 974 ACS Ruledef Configuration Mode Commands ▀ ip total-length ip total-length This command allows you to define rule expressions to...
  • Page 975ACS Ruledef Configuration Mode Commands ip uplink ▀ ip uplink This command allows you to define rule expressions to match...
  • Page 976 ACS Ruledef Configuration Mode Commands ▀ ip version ip version This command allows you to define rule expressions to...
  • Page 977ACS Ruledef Configuration Mode Commands mms any-match ▀ mms any-match This command allows you to define rule expressions to match...
  • Page 978 ACS Ruledef Configuration Mode Commands ▀ mms bcc mms bcc This command allows you to define rule expressions to...
  • Page 979ACS Ruledef Configuration Mode Commands mms bcc ▀ Usage Use this command to define rule expressions to match recipient address...
  • Page 980 ACS Ruledef Configuration Mode Commands ▀ mms cc mms cc This command allows you to define rule expressions to...
  • Page 981ACS Ruledef Configuration Mode Commands mms cc ▀ Usage Use this command to define rule expressions to match recipient addresses...
  • Page 982 ACS Ruledef Configuration Mode Commands ▀ mms content location mms content location This command allows you to define rule...
  • Page 983ACS Ruledef Configuration Mode Commands mms content location ▀ Usage Use this command to define rule expressions to match the...
  • Page 984 ACS Ruledef Configuration Mode Commands ▀ mms content type mms content type This command allows you to define rule...
  • Page 985ACS Ruledef Configuration Mode Commands mms content type ▀ Usage Use this command to define rule expressions to match content-type...
  • Page 986 ACS Ruledef Configuration Mode Commands ▀ mms downlink mms downlink This command allows you to define rule expressions to...
  • Page 987ACS Ruledef Configuration Mode Commands mms from ▀ mms from This command allows you to define rule expressions to match...
  • Page 988 ACS Ruledef Configuration Mode Commands ▀ mms from Usage Use this command to define rule expressions to match the...
  • Page 989ACS Ruledef Configuration Mode Commands mms message-id ▀ mms message-id This command allows you to define rule expressions to match...
  • Page 990 ACS Ruledef Configuration Mode Commands ▀ mms message-id Usage Use this command to define rule expressions to match the...
  • Page 991ACS Ruledef Configuration Mode Commands mms pdu-type ▀ mms pdu-type This command allows you to define rule expressions to match...
  • Page 992 ACS Ruledef Configuration Mode Commands ▀ mms pdu-type Usage Use this command to define rule expressions to match the...
  • Page 993ACS Ruledef Configuration Mode Commands mms previous-state ▀ mms previous-state This command allows you to define rule expressions to match...
  • Page 994 ACS Ruledef Configuration Mode Commands ▀ mms previous-state Usage Use this command to define rule expressions to match the...
  • Page 995ACS Ruledef Configuration Mode Commands mms response status ▀ mms response status This command allows you to define rule expressions...
  • Page 996 ACS Ruledef Configuration Mode Commands ▀ mms state mms state This command allows you to define rule expressions to...
  • Page 997ACS Ruledef Configuration Mode Commands mms state ▀  retrieval-success  retrieve-conf-received  send-success Usage Use this command to define...
  • Page 998 ACS Ruledef Configuration Mode Commands ▀ mms status mms status This command allows you to define rule expressions to...
  • Page 999ACS Ruledef Configuration Mode Commands mms subject ▀ mms subject This command allows you to define rule expressions to match...
  • Page 1000 ACS Ruledef Configuration Mode Commands ▀ mms subject Usage Use this command to define rule expressions to match “subject”...
  • Page 1001ACS Ruledef Configuration Mode Commands mms tid ▀ mms tid This command allows you to define rule expressions to match...
  • Page 1002 ACS Ruledef Configuration Mode Commands ▀ mms tid Usage Use this command to define rule expressions to match TID...
  • Page 1003ACS Ruledef Configuration Mode Commands mms to ▀ mms to This command allows you to define rule expressions to match...
  • Page 1004 ACS Ruledef Configuration Mode Commands ▀ mms to Usage Use this command to define rule expressions to match “to”...
  • Page 1005ACS Ruledef Configuration Mode Commands mms uplink ▀ mms uplink This command allows you to define rule expressions to match...
  • Page 1006 ACS Ruledef Configuration Mode Commands ▀ mms version mms version This command allows you to define rule expressions to...
  • Page 1007ACS Ruledef Configuration Mode Commands multi-line-or all-lines ▀ multi-line-or all-lines This command applies the OR operator to all lines in...
  • Page 1008 ACS Ruledef Configuration Mode Commands ▀ p2p any-match p2p any-match This command allows you to define rule expressions to...
  • Page 1009ACS Ruledef Configuration Mode Commands p2p behavioral ▀ p2p behavioral This command allows you to define rule expressions to match...
  • Page 1010 ACS Ruledef Configuration Mode Commands ▀ p2p behavioral disabled by default and meant only for statistical purposes (not for...
  • Page 1011ACS Ruledef Configuration Mode Commands p2p protocol ▀ p2p protocol This command allows you to define rule expressions to match...
  • Page 1012 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  avi  badoo  baidumovie  battlefld  bbm ...
  • Page 1013ACS Ruledef Configuration Mode Commands p2p protocol ▀  filetopia  flash  flickr  florensia  foursquare  freenet...
  • Page 1014 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  icloud  idrive  igo  iheartradio  imesh ...
  • Page 1015ACS Ruledef Configuration Mode Commands p2p protocol ▀  msn  msrp  mute  mypeople  myspace  nateontalk...
  • Page 1016 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  qqgame  qqlive  quake  quicktime  radio-paradise ...
  • Page 1017ACS Ruledef Configuration Mode Commands p2p protocol ▀  stealthnet  steam  stun  sudaphone  svtplay  tagged...
  • Page 1018 ACS Ruledef Configuration Mode Commands ▀ p2p protocol  vtun  warcft3  waze  webex  wechat ...
  • Page 1019ACS Ruledef Configuration Mode Commands p2p protocol-group ▀ p2p protocol-group This command allows you to define rule expressions to match...
  • Page 1020 ACS Ruledef Configuration Mode Commands ▀ p2p protocol-group  p2p-anon-filesharing: Peer to Peer application/protocols used for anonymous filesharing. ...
  • Page 1021ACS Ruledef Configuration Mode Commands p2p traffic-type ▀ p2p traffic-type This command allows you to define rule expressions to match...
  • Page 1022 ACS Ruledef Configuration Mode Commands ▀ p2p traffic-type Usage Use this command to configure the system to detect voice...
  • Page 1023ACS Ruledef Configuration Mode Commands pop3 any-match ▀ pop3 any-match This command allows you to define rule expressions to match...
  • Page 1024 ACS Ruledef Configuration Mode Commands ▀ pop3 command args pop3 command args This command allows you to define rule...
  • Page 1025ACS Ruledef Configuration Mode Commands pop3 command args ▀ Usage Use this command to define rule expressions to match POP3...
  • Page 1026 ACS Ruledef Configuration Mode Commands ▀ pop3 command id pop3 command id This command allows you to define rule...
  • Page 1027ACS Ruledef Configuration Mode Commands pop3 command name ▀ pop3 command name This command allows you to define rule expressions...
  • Page 1028 ACS Ruledef Configuration Mode Commands ▀ pop3 command name Usage Use this command to define rule expressions to match...
  • Page 1029ACS Ruledef Configuration Mode Commands pop3 mail-size ▀ pop3 mail-size This command allows you to define rule expressions to match...
  • Page 1030 ACS Ruledef Configuration Mode Commands ▀ pop3 mail-size Usage Use this command to define rule expressions to match POP3...
  • Page 1031ACS Ruledef Configuration Mode Commands pop3 pdu-length ▀ pop3 pdu-length This command allows you to define rule expressions to match...
  • Page 1032 ACS Ruledef Configuration Mode Commands ▀ pop3 pdu-length Usage Use this command to define rule expressions to match POP3...
  • Page 1033ACS Ruledef Configuration Mode Commands pop3 pdu-type ▀ pop3 pdu-type This command allows you to define rule expressions to match...
  • Page 1034 ACS Ruledef Configuration Mode Commands ▀ pop3 previous-state pop3 previous-state This command allows you to define rule expressions to...
  • Page 1035ACS Ruledef Configuration Mode Commands pop3 reply args ▀ pop3 reply args This command allows you to define rule expressions...
  • Page 1036 ACS Ruledef Configuration Mode Commands ▀ pop3 reply args Usage Use this command to define rule expressions to match...
  • Page 1037ACS Ruledef Configuration Mode Commands pop3 reply id ▀ pop3 reply id This command allows you to define rule expressions...
  • Page 1038 ACS Ruledef Configuration Mode Commands ▀ pop3 reply status pop3 reply status This command allows you to define rule...
  • Page 1039ACS Ruledef Configuration Mode Commands pop3 session-length ▀ pop3 session-length This command allows you to define rule expressions to match...
  • Page 1040 ACS Ruledef Configuration Mode Commands ▀ pop3 session-length Usage Use this command to define rule expressions to match the...
  • Page 1041ACS Ruledef Configuration Mode Commands pop3 state ▀ pop3 state This command allows you to define rule expressions to match...
  • Page 1042 ACS Ruledef Configuration Mode Commands ▀ pop3 user-name pop3 user-name This command allows you to define rule expressions to...
  • Page 1043ACS Ruledef Configuration Mode Commands pop3 user-name ▀ Usage Use this command to define rule expressions to match POP3 user...
  • Page 1044 ACS Ruledef Configuration Mode Commands ▀ pptp any-match pptp any-match This command allows you to defines a rule expression...
  • Page 1045ACS Ruledef Configuration Mode Commands pptp ctrl-msg-type ▀ pptp ctrl-msg-type This command allows you to define rule expressions to match...
  • Page 1046 ACS Ruledef Configuration Mode Commands ▀ pptp ctrl-msg-type Example The following command specifies to match echo-reply message type: pptp...
  • Page 1047ACS Ruledef Configuration Mode Commands pptp gre any-match ▀ pptp gre any-match This command allows you to define rule expressions...
  • Page 1048 ACS Ruledef Configuration Mode Commands ▀ radius any-match radius any-match This command allows you to define rule expressions to...
  • Page 1049ACS Ruledef Configuration Mode Commands radius error ▀ radius error This command allows you to define rule expressions to match...
  • Page 1050 ACS Ruledef Configuration Mode Commands ▀ radius state radius state This command allows you to define rule expressions to...
  • Page 1051ACS Ruledef Configuration Mode Commands rtcp any-match ▀ rtcp any-match This command allows you to define rule expressions to match...
  • Page 1052 ACS Ruledef Configuration Mode Commands ▀ rtcp jitter rtcp jitter This command allows you to define rule expressions to...
  • Page 1053ACS Ruledef Configuration Mode Commands rtcp parent-proto ▀ rtcp parent-proto This command allows you to define rule expressions to match...
  • Page 1054 ACS Ruledef Configuration Mode Commands ▀ rtcp pdu-length rtcp pdu-length This command allows you to define rule expressions to...
  • Page 1055ACS Ruledef Configuration Mode Commands rtcp rtsp-id ▀ rtcp rtsp-id This command allows you to define rule expressions to match...
  • Page 1056 ACS Ruledef Configuration Mode Commands ▀ rtcp rtsp-id Usage Use this command to define rule expressions to match an...
  • Page 1057ACS Ruledef Configuration Mode Commands rtcp session-length ▀ rtcp session-length This command allows you to define rule expressions to match...
  • Page 1058 ACS Ruledef Configuration Mode Commands ▀ rtcp uri rtcp uri This command allows you to define rule expressions to...
  • Page 1059ACS Ruledef Configuration Mode Commands rtcp uri ▀ Example The following command defines a rule expression to match user traffic...
  • Page 1060 ACS Ruledef Configuration Mode Commands ▀ rtp any-match rtp any-match This command allows you to define rule expressions to...
  • Page 1061ACS Ruledef Configuration Mode Commands rtp parent-proto ▀ rtp parent-proto This command allows you to define rule expressions to match...
  • Page 1062 ACS Ruledef Configuration Mode Commands ▀ rtp pdu-length rtp pdu-length This command allows you to define rule expressions to...
  • Page 1063ACS Ruledef Configuration Mode Commands rtp rtsp-id ▀ rtp rtsp-id This command allows you to define rule expressions to match...
  • Page 1064 ACS Ruledef Configuration Mode Commands ▀ rtp rtsp-id Example The following command defines a rule expression to match RTSP...
  • Page 1065ACS Ruledef Configuration Mode Commands rtp session-length ▀ rtp session-length This command allows you to define rule expressions to match...
  • Page 1066 ACS Ruledef Configuration Mode Commands ▀ rtp uri rtp uri This command allows you to define rule expressions to...
  • Page 1067ACS Ruledef Configuration Mode Commands rtp uri ▀ Usage Use this command to define rule expressions to match media URI...
  • Page 1068 ACS Ruledef Configuration Mode Commands ▀ rtsp any-match rtsp any-match This command allows you to define rule expressions to...
  • Page 1069ACS Ruledef Configuration Mode Commands rtsp content length ▀ rtsp content length This command allows you to define rule expressions...
  • Page 1070 ACS Ruledef Configuration Mode Commands ▀ rtsp content type rtsp content type This command allows you to define rule...
  • Page 1071ACS Ruledef Configuration Mode Commands rtsp content type ▀ Usage Use this command to define rule expressions to match “content...
  • Page 1072 ACS Ruledef Configuration Mode Commands ▀ rtsp date rtsp date This command allows you to define rule expressions to...
  • Page 1073ACS Ruledef Configuration Mode Commands rtsp date ▀ Example The following command defines a rule expression to match the date...
  • Page 1074 ACS Ruledef Configuration Mode Commands ▀ rtsp previous-state rtsp previous-state This command allows you to define rule expressions to...
  • Page 1075ACS Ruledef Configuration Mode Commands rtsp reply code ▀ rtsp reply code This command allows you to define rule expressions...
  • Page 1076 ACS Ruledef Configuration Mode Commands ▀ rtsp request method rtsp request method This command allows you to define rule...
  • Page 1077ACS Ruledef Configuration Mode Commands rtsp request method ▀ Usage Use this command to define rule expressions to match the...
  • Page 1078 ACS Ruledef Configuration Mode Commands ▀ rtsp request packet rtsp request packet This command allows you to define rule...
  • Page 1079ACS Ruledef Configuration Mode Commands rtsp rtp-seq ▀ rtsp rtp-seq This command allows you to define rule expressions to match...
  • Page 1080 ACS Ruledef Configuration Mode Commands ▀ rtsp rtp-time rtsp rtp-time This command allows you to define rule expressions to...
  • Page 1081ACS Ruledef Configuration Mode Commands rtsp rtp-uri ▀ rtsp rtp-uri This command allows you to define rule expressions to match...
  • Page 1082 ACS Ruledef Configuration Mode Commands ▀ rtsp rtp-uri Usage Use this command to define rule expressions to match the...
  • Page 1083ACS Ruledef Configuration Mode Commands rtsp session-id ▀ rtsp session-id This command allows you to define rule expressions to match...
  • Page 1084 ACS Ruledef Configuration Mode Commands ▀ rtsp session-id Example The following command defines a rule expression to match the...
  • Page 1085ACS Ruledef Configuration Mode Commands rtsp session-length ▀ rtsp session-length This command allows you to define rule expressions to match...
  • Page 1086 ACS Ruledef Configuration Mode Commands ▀ rtsp state rtsp state This command allows you to define rule expressions to...
  • Page 1087ACS Ruledef Configuration Mode Commands rtsp uri ▀ rtsp uri This command allows you to define rule expressions to match...
  • Page 1088 ACS Ruledef Configuration Mode Commands ▀ rtsp uri Usage Use this command to define rule expressions to match URI...
  • Page 1089 ACS Ruledef Configuration Mode Commands rtsp uri ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1090 ACS Ruledef Configuration Mode Commands ▀ rtsp uri sub-part rtsp uri sub-part This command allows you to define rule...
  • Page 1091ACS Ruledef Configuration Mode Commands rtsp uri sub-part ▀  contains: Contains  ends-with: Ends with  starts-with: Starts with...
  • Page 1092 ACS Ruledef Configuration Mode Commands ▀ rtsp user-agent rtsp user-agent This command allows you to define rule expressions to...
  • Page 1093ACS Ruledef Configuration Mode Commands rtsp user-agent ▀ Example The following command defines a rule expression to match test in...
  • Page 1094 ACS Ruledef Configuration Mode Commands ▀ rtsp-stream any-match rtsp-stream any-match This command allows you to define rule expressions to...
  • Page 1095ACS Ruledef Configuration Mode Commands rtsp-stream first-setup-url ▀ rtsp-stream first-setup-url This command allows you to define rule expressions to match...
  • Page 1096 ACS Ruledef Configuration Mode Commands ▀ rtsp-stream first-setup-url Usage Use this command to specify a rule definition to analyze...
  • Page 1097 ACS Ruledef Configuration Mode Commands rtsp-stream first-setup-url ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1098 ACS Ruledef Configuration Mode Commands ▀ rule-application rule-application This command allows you to specify the purpose of a ruledef,...
  • Page 1099ACS Ruledef Configuration Mode Commands rule-application ▀ Usage Use this command to specify the rule application for a rule definition....
  • Page 1100 ACS Ruledef Configuration Mode Commands ▀ sdp any-match sdp any-match This command allows you to define rule expressions to...
  • Page 1101ACS Ruledef Configuration Mode Commands sdp connection-ip-address ▀ sdp connection-ip-address This command allows you to define rule expressions to match...
  • Page 1102 ACS Ruledef Configuration Mode Commands ▀ sdp media-audio-port sdp media-audio-port This command allows you to define rule expressions to...
  • Page 1103ACS Ruledef Configuration Mode Commands sdp media-video-port ▀ sdp media-video-port This command allows you to define rule expressions to match...
  • Page 1104 ACS Ruledef Configuration Mode Commands ▀ sdp uplink sdp uplink This command allows you to define rule expressions to...
  • Page 1105ACS Ruledef Configuration Mode Commands secure-http any-match ▀ secure-http any-match This command allows you to define rule expressions to match...
  • Page 1106 ACS Ruledef Configuration Mode Commands ▀ secure-http uplink secure-http uplink This command allows you to define rule expressions to...
  • Page 1107ACS Ruledef Configuration Mode Commands sip any-match ▀ sip any-match This command allows you to define rule expressions to match...
  • Page 1108 ACS Ruledef Configuration Mode Commands ▀ sip call-id sip call-id This command allows you to define rule expressions to...
  • Page 1109ACS Ruledef Configuration Mode Commands sip call-id ▀ Usage Use this command to define rule expressions to match the call...
  • Page 1110 ACS Ruledef Configuration Mode Commands ▀ sip content length sip content length This command allows you to define rule...
  • Page 1111ACS Ruledef Configuration Mode Commands sip content type ▀ sip content type This command allows you to define rule expressions...
  • Page 1112 ACS Ruledef Configuration Mode Commands ▀ sip content type Example The following command defines a rule expression to match...
  • Page 1113ACS Ruledef Configuration Mode Commands sip from ▀ sip from This command allows you to define rule expressions to match...
  • Page 1114 ACS Ruledef Configuration Mode Commands ▀ sip from Example The following command defines a rule expression to match test1...
  • Page 1115ACS Ruledef Configuration Mode Commands sip previous-state ▀ sip previous-state This command allows you to define rule expressions to match...
  • Page 1116 ACS Ruledef Configuration Mode Commands ▀ sip reply code sip reply code This command allows you to define rule...
  • Page 1117ACS Ruledef Configuration Mode Commands sip request method ▀ sip request method This command allows you to define rule expressions...
  • Page 1118 ACS Ruledef Configuration Mode Commands ▀ sip request method  subscribe  update Usage Use this command to define...
  • Page 1119ACS Ruledef Configuration Mode Commands sip request packet ▀ sip request packet This command allows you to define rule expressions...
  • Page 1120 ACS Ruledef Configuration Mode Commands ▀ sip state sip state This command allows you to define rule expressions to...
  • Page 1121ACS Ruledef Configuration Mode Commands sip to ▀ sip to This command allows you to define rule expressions to match...
  • Page 1122 ACS Ruledef Configuration Mode Commands ▀ sip to Usage Use this command to define rule expressions to match the...
  • Page 1123ACS Ruledef Configuration Mode Commands sip uri ▀ sip uri This command allows you to define rule expressions to match...
  • Page 1124 ACS Ruledef Configuration Mode Commands ▀ sip uri  ends-with: Ends with  starts-with: Starts with The string for...
  • Page 1125ACS Ruledef Configuration Mode Commands smtp any-match ▀ smtp any-match This command allows you to define rule expressions to match...
  • Page 1126 ACS Ruledef Configuration Mode Commands ▀ smtp command arguments smtp command arguments This command allows you to define rule...
  • Page 1127ACS Ruledef Configuration Mode Commands smtp command arguments ▀ Usage Use this command to define rule expressions to match SMTP...
  • Page 1128 ACS Ruledef Configuration Mode Commands ▀ smtp command id smtp command id This command allows you to define rule...
  • Page 1129ACS Ruledef Configuration Mode Commands smtp command name ▀ smtp command name This command allows you to define rule expressions...
  • Page 1130 ACS Ruledef Configuration Mode Commands ▀ smtp command name Usage Use this command to define rule expressions to match...
  • Page 1131ACS Ruledef Configuration Mode Commands smtp mail-size ▀ smtp mail-size This command allows you to define rule expressions to match...
  • Page 1132 ACS Ruledef Configuration Mode Commands ▀ smtp mail-size Usage Use this command to define rule expressions to match the...
  • Page 1133ACS Ruledef Configuration Mode Commands smtp pdu-length ▀ smtp pdu-length This command allows you to define rule expressions to match...
  • Page 1134 ACS Ruledef Configuration Mode Commands ▀ smtp pdu-length Usage Use this command to define rule expressions to match PDU...
  • Page 1135ACS Ruledef Configuration Mode Commands smtp previous-state ▀ smtp previous-state This command allows you to define rule expressions to match...
  • Page 1136 ACS Ruledef Configuration Mode Commands ▀ smtp recipient smtp recipient This command allows you to define rule expressions to...
  • Page 1137ACS Ruledef Configuration Mode Commands smtp recipient ▀ Usage Use this command to define rule expressions to match the recipient...
  • Page 1138 ACS Ruledef Configuration Mode Commands ▀ smtp reply arguments smtp reply arguments This command allows you to define rule...
  • Page 1139ACS Ruledef Configuration Mode Commands smtp reply arguments ▀ Usage Use this command to define rule expressions to match the...
  • Page 1140 ACS Ruledef Configuration Mode Commands ▀ smtp reply id smtp reply id This command allows you to define rule...
  • Page 1141ACS Ruledef Configuration Mode Commands smtp reply status ▀ smtp reply status This command allows you to define rule expressions...
  • Page 1142 ACS Ruledef Configuration Mode Commands ▀ smtp sender smtp sender This command allows you to define rule expressions to...
  • Page 1143ACS Ruledef Configuration Mode Commands smtp sender ▀ Example The following command defines a rule expression to match sender e-mail...
  • Page 1144 ACS Ruledef Configuration Mode Commands ▀ smtp session-length smtp session-length This command allows you to define rule expressions to...
  • Page 1145ACS Ruledef Configuration Mode Commands smtp session-length ▀ Usage Use this command to define rule expressions to match total length...
  • Page 1146 ACS Ruledef Configuration Mode Commands ▀ smtp state smtp state This command allows you to define rule expressions to...
  • Page 1147ACS Ruledef Configuration Mode Commands tcp analyzed out-of-order ▀ tcp analyzed out-of-order This command allows you to define rule expressions...
  • Page 1148 ACS Ruledef Configuration Mode Commands ▀ tcp analyzed out-of-order If this command is enabled the TCP out-of-order packets are...
  • Page 1149ACS Ruledef Configuration Mode Commands tcp any-match ▀ tcp any-match This command allows you to define rule expressions to match...
  • Page 1150 ACS Ruledef Configuration Mode Commands ▀ tcp connection-initiator tcp connection-initiator This command allows you to define rule expressions to...
  • Page 1151ACS Ruledef Configuration Mode Commands tcp downlink ▀ tcp downlink This command allows you to define rule expressions to match...
  • Page 1152 ACS Ruledef Configuration Mode Commands ▀ tcp dst-port tcp dst-port This command allows you to define rule expressions to...
  • Page 1153ACS Ruledef Configuration Mode Commands tcp dst-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1154 ACS Ruledef Configuration Mode Commands ▀ tcp duplicate tcp duplicate This command allows you to define rule expressions to...
  • Page 1155ACS Ruledef Configuration Mode Commands tcp either-port ▀ tcp either-port This command allows you to define rule expressions to match...
  • Page 1156 ACS Ruledef Configuration Mode Commands ▀ tcp either-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1157ACS Ruledef Configuration Mode Commands tcp error ▀ tcp error This command allows you to define rule expressions to identify...
  • Page 1158 ACS Ruledef Configuration Mode Commands ▀ tcp flag tcp flag This command allows you to define rule expressions to...
  • Page 1159ACS Ruledef Configuration Mode Commands tcp flag ▀ tcp flag = reset Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 1160 ACS Ruledef Configuration Mode Commands ▀ tcp initial-handshake-lost tcp initial-handshake-lost This command allows you to define rule expressions to...
  • Page 1161ACS Ruledef Configuration Mode Commands tcp payload ▀ tcp payload This command allows you to define rule expressions to match...
  • Page 1162 ACS Ruledef Configuration Mode Commands ▀ tcp payload-length tcp payload-length This command allows you to define rule expressions to...
  • Page 1163ACS Ruledef Configuration Mode Commands tcp previous-state ▀ tcp previous-state This command allows you to define rule expressions to match...
  • Page 1164 ACS Ruledef Configuration Mode Commands ▀ tcp previous-state Usage Use this command to define rule expressions to match a...
  • Page 1165ACS Ruledef Configuration Mode Commands tcp proxy-prev-state ▀ tcp proxy-prev-state This command allows you to define rule expressions to match...
  • Page 1166 ACS Ruledef Configuration Mode Commands ▀ tcp proxy-prev-state Usage If there is no TCP proxy configured, this configuration is...
  • Page 1167ACS Ruledef Configuration Mode Commands tcp proxy-state ▀ tcp proxy-state This command allows you to define rule expressions to match...
  • Page 1168 ACS Ruledef Configuration Mode Commands ▀ tcp proxy-state Usage If there is no TCP proxy configured, this configuration is...
  • Page 1169ACS Ruledef Configuration Mode Commands tcp session-length ▀ tcp session-length This command allows you to define rule expressions to match...
  • Page 1170 ACS Ruledef Configuration Mode Commands ▀ tcp src-port tcp src-port This command allows you to define rule expressions to...
  • Page 1171ACS Ruledef Configuration Mode Commands tcp src-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1172 ACS Ruledef Configuration Mode Commands ▀ tcp state tcp state This command allows you to define rule expressions to...
  • Page 1173ACS Ruledef Configuration Mode Commands tcp state ▀ Usage Use this command to define rule expressions to match a current...
  • Page 1174 ACS Ruledef Configuration Mode Commands ▀ tcp uplink tcp uplink This command allows you to define rule expressions to...
  • Page 1175ACS Ruledef Configuration Mode Commands tethering-detection ▀ tethering-detection This command allows you to define rule expressions to match tethered or...
  • Page 1176 ACS Ruledef Configuration Mode Commands ▀ tethering-detection http any-match = TRUE wsp any-match = TRUE multi-line-or all-lines tethering-detection flow-tethered...
  • Page 1177ACS Ruledef Configuration Mode Commands tftp any-match ▀ tftp any-match This command allows you to define rule expressions to match...
  • Page 1178 ACS Ruledef Configuration Mode Commands ▀ tftp data-any-match tftp data-any-match This command allows you to define rule expressions to...
  • Page 1179ACS Ruledef Configuration Mode Commands tls ▀ tls This command allows to configure TLS/SSL Server Name Indication (SNI) and corresponding...
  • Page 1180 ACS Ruledef Configuration Mode Commands ▀ tls The following command configures the name of the corresponding protocol to facebook:...
  • Page 1181ACS Ruledef Configuration Mode Commands udp any-match ▀ udp any-match This command allows you to define rule expressions to match...
  • Page 1182 ACS Ruledef Configuration Mode Commands ▀ udp downlink udp downlink This command allows you to define rule expressions to...
  • Page 1183ACS Ruledef Configuration Mode Commands udp dst-port ▀ udp dst-port This command allows you to define rule expressions to match...
  • Page 1184 ACS Ruledef Configuration Mode Commands ▀ udp dst-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1185ACS Ruledef Configuration Mode Commands udp either-port ▀ udp either-port This command allows you to define rule expressions to match...
  • Page 1186 ACS Ruledef Configuration Mode Commands ▀ udp either-port port-map port_map_name Specifies the port map for the port range. port_map_name...
  • Page 1187ACS Ruledef Configuration Mode Commands udp payload starts-with ▀ udp payload starts-with This command allows you to define rule expressions...
  • Page 1188 ACS Ruledef Configuration Mode Commands ▀ udp server-port udp server-port This command allows you to define rule expressions to...
  • Page 1189ACS Ruledef Configuration Mode Commands udp server-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1190 ACS Ruledef Configuration Mode Commands ▀ udp src-port udp src-port This command allows you to define rule expressions to...
  • Page 1191ACS Ruledef Configuration Mode Commands udp src-port ▀ port-map port_map_name Specifies the port map for the port range. port_map_name must...
  • Page 1192 ACS Ruledef Configuration Mode Commands ▀ udp uplink udp uplink This command allows you to define rule expressions to...
  • Page 1193ACS Ruledef Configuration Mode Commands wsp any-match ▀ wsp any-match This command allows you to define rule expressions to match...
  • Page 1194 ACS Ruledef Configuration Mode Commands ▀ wsp content type wsp content type This command allows you to define rule...
  • Page 1195ACS Ruledef Configuration Mode Commands wsp content type ▀ Usage Use this command to define rule expressions to match “content...
  • Page 1196 ACS Ruledef Configuration Mode Commands ▀ wsp domain wsp domain This command allows you to define rule expressions to...
  • Page 1197ACS Ruledef Configuration Mode Commands wsp domain ▀ From the URL, after http:// (if present) is removed, everything until the...
  • Page 1198 ACS Ruledef Configuration Mode Commands ▀ wsp downlink wsp downlink This command allows you to define rule expressions to...
  • Page 1199ACS Ruledef Configuration Mode Commands wsp first-request-packet ▀ wsp first-request-packet This command allows you to define rule expressions to match...
  • Page 1200 ACS Ruledef Configuration Mode Commands ▀ wsp host wsp host This command allows you to define rule expressions to...
  • Page 1201ACS Ruledef Configuration Mode Commands wsp host ▀ Usage Use this command to define rule expressions to match host name...
  • Page 1202 ACS Ruledef Configuration Mode Commands ▀ wsp pdu-length wsp pdu-length This command allows you to define rule expressions to...
  • Page 1203ACS Ruledef Configuration Mode Commands wsp pdu-type ▀ wsp pdu-type This command allows you to define rule expressions to match...
  • Page 1204 ACS Ruledef Configuration Mode Commands ▀ wsp pdu-type  redirect  reply  resume  suspend  trace Usage...
  • Page 1205ACS Ruledef Configuration Mode Commands wsp previous-state ▀ wsp previous-state This command allows you to define rule expressions to match...
  • Page 1206 ACS Ruledef Configuration Mode Commands ▀ wsp reply code wsp reply code This command allows you to define rule...
  • Page 1207ACS Ruledef Configuration Mode Commands wsp session-length ▀ wsp session-length This command allows you to define rule expressions to match...
  • Page 1208 ACS Ruledef Configuration Mode Commands ▀ wsp session-management wsp session-management This command allows you to define rule expressions to...
  • Page 1209ACS Ruledef Configuration Mode Commands wsp session-management ▀  connected  connecting  init  resuming  suspended Usage Use...
  • Page 1210 ACS Ruledef Configuration Mode Commands ▀ wsp state wsp state This command allows you to define rule expressions to...
  • Page 1211ACS Ruledef Configuration Mode Commands wsp status ▀ wsp status This command has been deprecated. See the wsp reply-code command....
  • Page 1212 ACS Ruledef Configuration Mode Commands ▀ wsp tid wsp tid This command allows you to define rule expressions to...
  • Page 1213ACS Ruledef Configuration Mode Commands wsp total-length ▀ wsp total-length This command has been deprecated. See the wsp session-length command....
  • Page 1214 ACS Ruledef Configuration Mode Commands ▀ wsp transfer-encoding wsp transfer-encoding This command allows you to define rule expressions to...
  • Page 1215ACS Ruledef Configuration Mode Commands wsp transfer-encoding ▀ The following command defines a rule expression to match user traffic based...
  • Page 1216 ACS Ruledef Configuration Mode Commands ▀ wsp uplink wsp uplink This command allows you to define rule expressions to...
  • Page 1217ACS Ruledef Configuration Mode Commands wsp url ▀ wsp url This command allows you to define rule expressions to match...
  • Page 1218 ACS Ruledef Configuration Mode Commands ▀ wsp url Usage Use this command to define rule expressions to match the...
  • Page 1219 ACS Ruledef Configuration Mode Commands wsp url ▀ Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1220 ACS Ruledef Configuration Mode Commands ▀ wsp user-agent wsp user-agent This command allows you to define rule expressions to...
  • Page 1221ACS Ruledef Configuration Mode Commands wsp user-agent ▀ Example The following command defines a rule expression to match value test...
  • Page 1222 ACS Ruledef Configuration Mode Commands ▀ wsp x-header wsp x-header This command allows you to define rule expressions to...
  • Page 1223ACS Ruledef Configuration Mode Commands wsp x-header ▀ Usage Use this command to configure any x-header field in WSP and...
  • Page 1224 ACS Ruledef Configuration Mode Commands ▀ wtp any-match wtp any-match This command allows you to define rule expressions to...
  • Page 1225ACS Ruledef Configuration Mode Commands wtp downlink ▀ wtp downlink This command allows you to define rule expressions to match...
  • Page 1226 ACS Ruledef Configuration Mode Commands ▀ wtp gtr wtp gtr This command allows you to define rule expressions to...
  • Page 1227ACS Ruledef Configuration Mode Commands wtp pdu-length ▀ wtp pdu-length This command allows you to define rule expressions to match...
  • Page 1228 ACS Ruledef Configuration Mode Commands ▀ wtp pdu-type wtp pdu-type This command allows you to define rule expressions to...
  • Page 1229ACS Ruledef Configuration Mode Commands wtp pdu-type ▀ wtp pdu-type = result Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 1230 ACS Ruledef Configuration Mode Commands ▀ wtp previous-state wtp previous-state This command allows you to define rule expressions to...
  • Page 1231ACS Ruledef Configuration Mode Commands wtp rid ▀ wtp rid This command allows you to define rule expressions to match...
  • Page 1232 ACS Ruledef Configuration Mode Commands ▀ wtp state wtp state This command allows you to define rule expressions to...
  • Page 1233ACS Ruledef Configuration Mode Commands wtp tid ▀ wtp tid This command allows you to define rule expressions to match...
  • Page 1234 ACS Ruledef Configuration Mode Commands ▀ wtp transaction class wtp transaction class This command allows you to define rule...
  • Page 1235ACS Ruledef Configuration Mode Commands wtp ttr ▀ wtp ttr This command allows you to define rule expressions to match...
  • Page 1236 ACS Ruledef Configuration Mode Commands ▀ wtp uplink wtp uplink This command allows you to define rule expressions to...
  • Page 1237ACS Ruledef Configuration Mode Commands www any-match ▀ www any-match This command allows you to define rule expressions to match...
  • Page 1238 ACS Ruledef Configuration Mode Commands ▀ www content type www content type This command allows you to define rule...
  • Page 1239ACS Ruledef Configuration Mode Commands www content type ▀ Usage Use this command to define rule expressions to match the...
  • Page 1240 ACS Ruledef Configuration Mode Commands ▀ www domain www domain This command allows you to define rule expressions to...
  • Page 1241ACS Ruledef Configuration Mode Commands www domain ▀ From the URL, after http:// (if present) is removed, everything until the...
  • Page 1242 ACS Ruledef Configuration Mode Commands ▀ www downlink www downlink This command allows you to define rule expressions to...
  • Page 1243ACS Ruledef Configuration Mode Commands www first-request-packet ▀ www first-request-packet This command allows you to define rule expressions to match...
  • Page 1244 ACS Ruledef Configuration Mode Commands ▀ www header-length www header-length This command allows you to define rule expressions to...
  • Page 1245ACS Ruledef Configuration Mode Commands www host ▀ www host This command allows you to define rule expressions to match...
  • Page 1246 ACS Ruledef Configuration Mode Commands ▀ www host Usage Use this command to define rule expressions to match the...
  • Page 1247ACS Ruledef Configuration Mode Commands www payload-length ▀ www payload-length This command allows you to define rule expressions to match...
  • Page 1248 ACS Ruledef Configuration Mode Commands ▀ www pdu-length www pdu-length This command allows you to define rule expressions to...
  • Page 1249ACS Ruledef Configuration Mode Commands www previous-state ▀ www previous-state This command allows you to define rule expressions to match...
  • Page 1250 ACS Ruledef Configuration Mode Commands ▀ www reply code www reply code This command allows you to define rule...
  • Page 1251ACS Ruledef Configuration Mode Commands www state ▀ www state This command allows you to define rule expressions to match...
  • Page 1252 ACS Ruledef Configuration Mode Commands ▀ www transfer-encoding www transfer-encoding This command allows you to define rule expressions to...
  • Page 1253ACS Ruledef Configuration Mode Commands www transfer-encoding ▀ Usage Use this command to define rule expressions to match the “transfer...
  • Page 1254 ACS Ruledef Configuration Mode Commands ▀ www url www url This command allows you to define rule expressions to...
  • Page 1255 ACS Ruledef Configuration Mode Commands www url ▀ Usage Use this command to define rule expressions to match the URL...
  • Page 1256 ACS Ruledef Configuration Mode Commands ▀ www url Regex Character Description | Specify OR regular expression operator Important: When...
  • Page 1257: Chapter 20 ACS Timedef Configuration Mode CommandsChapter 20 ACS Timedef Configuration Mode Commands The ACS Timedef Configuration Mode enables configuring the Time-of-Day Activation/Deactivation feature. Important: This...
  • Page 1258 ACS Timedef Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1259ACS Timedef Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1260 ACS Timedef Configuration Mode Commands ▀ start start This command allows you to configure timeslots in the current timedef....
  • Page 1261ACS Timedef Configuration Mode Commands start ▀ In specifying the start/end time:  hh: Specifies the start/end hour, and must...
  • Page 1262
  • Page 1263: Chapter 21 ACS x-Header Format Configuration Mode CommandsChapter 21 ACS x-Header Format Configuration Mode Commands The ACS x-header Format Configuration Mode is used to create and configure...
  • Page 1264 ACS x-Header Format Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1265ACS x-Header Format Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1266 ACS x-Header Format Configuration Mode Commands ▀ insert insert This command allows you to configure the x-header fields to...
  • Page 1267ACS x-Header Format Configuration Mode Commands insert ▀ string-constant xheader_field_value Specifies constant a string value for x-header field to be...
  • Page 1268 ACS x-Header Format Configuration Mode Commands ▀ insert  radius-string: SN-Transparent-Data Attribute received in RADIUS ACCESS ACCEPT message. ...
  • Page 1269: Chapter 22 ALCAP Configuration Mode CommandsChapter 22 ALCAP Configuration Mode Commands The ALCAP Service Configuration Mode is used to create, provide, and manage the Access...
  • Page 1270 ALCAP Configuration Mode Commands ▀ aal2-node aal2-node Thsi command creates/configures AAL2 node configuration to defined AAL2 node properties for...
  • Page 1271ALCAP Configuration Mode Commands aal2-node ▀ aal2-node aal2_node_name -noconfirm Command Line Interface Reference, StarOS Release 18 ▄ 1271
  • Page 1272 ALCAP Configuration Mode Commands ▀ aal2-route aal2-route This command defines a route for each ATM Endpoint Service Address (AESA)...
  • Page 1273ALCAP Configuration Mode Commands aal2-route ▀ The default keyword can be used to configure a default aal2-route which will match...
  • Page 1274 ALCAP Configuration Mode Commands ▀ associate associate This command associates a previously configured SS7 routing domain with this ALCAP...
  • Page 1275ALCAP Configuration Mode Commands end ▀ end Exits the current mode and returns to the Exec Mode. Product All Privilege...
  • Page 1276 ALCAP Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the previous mode. Product All...
  • Page 1277ALCAP Configuration Mode Commands maximum reset-retransmission ▀ maximum reset-retransmission This command sets the maximum number of retries allowed for transmission...
  • Page 1278 ALCAP Configuration Mode Commands ▀ self-point-code self-point-code This command specifies the SS7 point code address for ALCAP service. Product...
  • Page 1279ALCAP Configuration Mode Commands timeout alcap ▀ timeout alcap This command configures the timeout duration for various ALCAP procedure timers...
  • Page 1280 ALCAP Configuration Mode Commands ▀ timeout alcap mod mod_timer_value Specifies the maximum time, in seconds, the system waits for...
  • Page 1281ALCAP Configuration Mode Commands timeout alcap ▀ Usage Use this command to configure the timeout duration for various ALCAP procedures...
  • Page 1282 ALCAP Configuration Mode Commands ▀ timeout stc timeout stc This command configures the timeout duration for STC long (T30)...
  • Page 1283ALCAP Configuration Mode Commands timeout stc ▀ not to reduce traffic too rapidly. Reception of a congestion indication after the...
  • Page 1284
  • Page 1285: Chapter 23 APN Configuration Mode CommandsChapter 23 APN Configuration Mode Commands The Access Point Name (APN) Configuration Mode is used to create and configure APN...
  • Page 1286 APN Configuration Mode Commands ▀ aaa aaa This command configures Authentication, Authorization, and Accounting (AAA) functionality at the Access...
  • Page 1287APN Configuration Mode Commands aaa ▀ Usage Use this command to configure AAA functionality at the APN level. Instead of...
  • Page 1288 APN Configuration Mode Commands ▀ access-link access-link Configures IP fragmentation processing over the Access-link (PPP, GTP etc.). Product GGSN...
  • Page 1289APN Configuration Mode Commands access-link ▀ the above tests) into two payloads (if the DF bit is not set). If...
  • Page 1290 APN Configuration Mode Commands ▀ accounting-mode accounting-mode Configures the protocol to be used for PDP context accounting by this...
  • Page 1291APN Configuration Mode Commands accounting-mode ▀ none Disables accounting for PDP contexts using this APN. When accounting mode is set...
  • Page 1292 APN Configuration Mode Commands ▀ accounting-mode context. As specified by the standards, a CDR is not generated when a...
  • Page 1293APN Configuration Mode Commands active-charging bandwidth-policy ▀ active-charging bandwidth-policy Configures the bandwidth policy to be used for subscribers who use...
  • Page 1294 APN Configuration Mode Commands ▀ active-charging link-monitor tcp active-charging link-monitor tcp Enables the TCP link monitoring feature on the...
  • Page 1295APN Configuration Mode Commands active-charging link-monitor tcp ▀ Usage Use this command to enable TCP link monitoring on the Mobile...
  • Page 1296 APN Configuration Mode Commands ▀ active-charging radio-congestion active-charging radio-congestion Enables the Congestion Management feature on the Mobile Video Gateway....
  • Page 1297APN Configuration Mode Commands active-charging rulebase ▀ active-charging rulebase Specifies the name of the Active Charging Service (ACS) rulebase to...
  • Page 1298 APN Configuration Mode Commands ▀ active-charging rulebase-list active-charging rulebase-list Specifies the name of the ACS rulebase list to be...
  • Page 1299APN Configuration Mode Commands apn-ambr ▀ apn-ambr Configures the Aggregated Maximum Bit Rate (AMBR) for all PDNs using this APN....
  • Page 1300 APN Configuration Mode Commands ▀ apn-ambr Important: In 17.3 and later releases, this option has been deprecated. violate-action {...
  • Page 1301APN Configuration Mode Commands associate accounting-policy ▀ associate accounting-policy Associates the APN with specific pre-configured policies configured in the same...
  • Page 1302 APN Configuration Mode Commands ▀ associate qci-qos-mapping associate qci-qos-mapping Associates a pre-configured QCI-QoS-Mapping table with this APN to support...
  • Page 1303APN Configuration Mode Commands authentication ▀ authentication Configures the APN’s authentication parameters. Product GGSN P-GW PDG/TTG SAEGW Privilege Security Administrator,...
  • Page 1304 APN Configuration Mode Commands ▀ authentication username-strip-apn Default: Disabled. This keyword if enabled, either with msisdn-auth or imsi-auth strips...
  • Page 1305APN Configuration Mode Commands authentication ▀ This option is used in conjunction with allow-noauth. It allows session to get established...
  • Page 1306 APN Configuration Mode Commands ▀ authentication Authentication IP PDP Context Behavior PPP PDP Context Behavior Mechanism allow- Allows the...
  • Page 1307APN Configuration Mode Commands authorize-with-hss ▀ authorize-with-hss This command enables or disables subscriber session authorization per APN via a Home...
  • Page 1308 APN Configuration Mode Commands ▀ authorize-with-hss Important: If the S6b AAA group is configured under both APN and P-GW...
  • Page 1309APN Configuration Mode Commands bearer-control-mode ▀ bearer-control-mode Enables or disables the bearer control mode for network controlled QoS (NCQoS) through...
  • Page 1310 APN Configuration Mode Commands ▀ bearer-control-mode This keyword indicates that the APN configured with “none” option for bearer control...
  • Page 1311APN Configuration Mode Commands bearer-duration-stats ▀ bearer-duration-stats Enables or disables per QCI call duration statistics for dedicated bearers. Product P-GW...
  • Page 1312 APN Configuration Mode Commands ▀ cc-home cc-home Configures the home subscriber charging characteristics (CC) used by the GGSN when...
  • Page 1313APN Configuration Mode Commands cc-home ▀ Multiple behavior bits can be configured for a single profile index by ORing the...
  • Page 1314 APN Configuration Mode Commands ▀ cc-profile cc-profile This command selectively enables or disables the Gy sessions based on the...
  • Page 1315APN Configuration Mode Commands cc-profile ▀ cc_group_name Specifies name of the credit control group as an alphanumeric string of 1...
  • Page 1316 APN Configuration Mode Commands ▀ cc-roaming cc-roaming Configures the roaming subscriber charging characteristics (CC) used by the GGSN when...
  • Page 1317APN Configuration Mode Commands cc-roaming ▀ Multiple behavior bits can be configured for a single profile index by ORing the...
  • Page 1318 APN Configuration Mode Commands ▀ cc-sgsn cc-sgsn Specifies the source for charging characteristics (CC) - those configured locally or...
  • Page 1319APN Configuration Mode Commands cc-sgsn ▀ Before entering no cc-sgsn, it is helpful to determine which CC sources have been...
  • Page 1320 APN Configuration Mode Commands ▀ cc-sgsn Usage This command specifies whether or not CCs received from the SGSN will...
  • Page 1321APN Configuration Mode Commands cc-visiting ▀ cc-visiting Configures the visiting subscriber charging characteristics (CC) used by the GGSN when those...
  • Page 1322 APN Configuration Mode Commands ▀ cc-visiting Multiple behavior bits can be configured for a single profile index by ORing...
  • Page 1323APN Configuration Mode Commands content-filtering category ▀ content-filtering category Enables or disables the specified pre-configured Category Policy Identifier for Category-based...
  • Page 1324 APN Configuration Mode Commands ▀ content-filtering category The following command enters the Content Filtering Policy Configuration Mode and enables...
  • Page 1325APN Configuration Mode Commands credit-control-client ▀ credit-control-client Configures the credit-control client parameters for subscribers who use this APN. Product GGSN...
  • Page 1326 APN Configuration Mode Commands ▀ credit-control-client Important: This CLI can be changed on the fly. The modified values will...
  • Page 1327APN Configuration Mode Commands credit-control-group ▀ credit-control-group Configures the credit control group to be used for subscribers who use this...
  • Page 1328 APN Configuration Mode Commands ▀ credit-control-group Important: The CLI command “cc-sgsn” within APN configuration mode, should be used cautiously...
  • Page 1329APN Configuration Mode Commands daf-pdp-type ▀ daf-pdp-type By configuring this command P-GW/GGSN can set different behavior of assigning PDN Type...
  • Page 1330 APN Configuration Mode Commands ▀ daf-pdp-type Usage By configuring this command P-GW/GGSN can set different behavior of assigning PDN...
  • Page 1331APN Configuration Mode Commands data-tunnel mtu ▀ data-tunnel mtu Configures the Maximum Transmission Unit (MTU) for data sent on the...
  • Page 1332 APN Configuration Mode Commands ▀ data-tunneling ignore df-bit data-tunneling ignore df-bit Controls the handling of the DF (Don't Fragment)...
  • Page 1333APN Configuration Mode Commands dcca origin endpoint ▀ dcca origin endpoint This command is obsolete. To configure the Diameter Credit...
  • Page 1334 APN Configuration Mode Commands ▀ dcca peer-select dcca peer-select Specifies the Diameter credit control primary and secondary host for...
  • Page 1335APN Configuration Mode Commands dcca peer-select ▀ Caution: This configuration completely overrides all instances of diameter peer-select that have been...
  • Page 1336 APN Configuration Mode Commands ▀ description description Allows you to enter descriptive text for this configuration. Product All Privilege...
  • Page 1337APN Configuration Mode Commands dhcp context-name ▀ dhcp context-name Configures the name of the context on the system in which...
  • Page 1338 APN Configuration Mode Commands ▀ dhcp lease-expiration-policy dhcp lease-expiration-policy Configures the system’s handling of PDP contexts whose DHCP assigned...
  • Page 1339APN Configuration Mode Commands dhcp service-name ▀ dhcp service-name Configures the name of a specific DHCP service to use when...
  • Page 1340 APN Configuration Mode Commands ▀ dhcpv6 context-name dhcpv6 context-name Configures the name of the context on the system in...
  • Page 1341APN Configuration Mode Commands dhcpv6 service-name ▀ dhcpv6 service-name Specifies which DHCPV6 service to use, if the alloc-type is configured...
  • Page 1342 APN Configuration Mode Commands ▀ dns dns Configures the Domain Name Service (DNS) servers that will be used by...
  • Page 1343APN Configuration Mode Commands dns ▀ The DNS can be specified at the APN level in APN configuration as well...
  • Page 1344 APN Configuration Mode Commands ▀ egtp egtp Enables/disables the Overcharging Protection feature on an APN service. Product P-GW SAEGW...
  • Page 1345APN Configuration Mode Commands egtp ▀ egtp overcharge-protection drop-all Command Line Interface Reference, StarOS Release 18 ▄ 1345
  • Page 1346 APN Configuration Mode Commands ▀ egtpc-qci-stats egtpc-qci-stats Enables/disables an APN candidate list for the apn-expansion bulkstats schema. Product P-GW...
  • Page 1347APN Configuration Mode Commands egtpc-qci-stats ▀ qci5 Configure apn-qci-egtpc statistics for QCI 5. qci6 Configure apn-qci-egtpc statistics for QCI 6....
  • Page 1348 APN Configuration Mode Commands ▀ ehrpd-access ehrpd-access Configures the P-GW to exclude IPv6 traffic from being delivered to UEs,...
  • Page 1349APN Configuration Mode Commands emergency-apn ▀ emergency-apn Configures this APN as an emergency APN for Voice over LTE (VoLTE) based...
  • Page 1350 APN Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1351APN Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 1352 APN Configuration Mode Commands ▀ firewall policy firewall policy Eenables or disables Stateful Firewall support for the APN. Product...
  • Page 1353APN Configuration Mode Commands firewall policy ▀ The following command disables Stateful Firewall support for an APN: no firewall policy...
  • Page 1354 APN Configuration Mode Commands ▀ fw-and-nat policy fw-and-nat policy Specifies the Firewall-and-NAT policy to be used for subscribers who...
  • Page 1355APN Configuration Mode Commands fw-and-nat policy ▀ Important: This customer-specific command must be used to configure the Policy-based Firewall-and-NAT feature....
  • Page 1356 APN Configuration Mode Commands ▀ gsm-qos negotiate gsm-qos negotiate Enables negotiation of the QoS Reliability Class attribute based on...
  • Page 1357APN Configuration Mode Commands gsm-qos negotiate ▀ Code Value 2 7*10-3 3 10-3 4 10-4 5 10-5 6 10-6 7...
  • Page 1358 APN Configuration Mode Commands ▀ gtpp group gtpp group Enables a configured GTPP server group to an APN for...
  • Page 1359APN Configuration Mode Commands gtpp group ▀ accounting-context ac_context_name Specifies the name of an accounting context on the system that...
  • Page 1360 APN Configuration Mode Commands ▀ gtpp secondary-group gtpp secondary-group Enables or associates a preconfigured secondary GTPP server group to...
  • Page 1361APN Configuration Mode Commands gtpp secondary-group ▀ When the secondary GTPP group is configured with this command, the GTPP messages...
  • Page 1362 APN Configuration Mode Commands ▀ idle-timeout-activity idle-timeout-activity Configures a session idle-timeout to be reset with uplink packets only, or...
  • Page 1363APN Configuration Mode Commands ignore-alt-config ▀ ignore-alt-config Configures preference to APN/AAA-defined behavior/parameters. If the parameters are not defined in APN/AAA,...
  • Page 1364 APN Configuration Mode Commands ▀ ikev2 tsr ikev2 tsr Configures the Traffic Selector responder (TSr) negotiation behavior during IKEv2...
  • Page 1365APN Configuration Mode Commands ims-auth-service ▀ ims-auth-service Applies an IMS (IP Multimedia Subsystem) authorization service to a subscriber through APN...
  • Page 1366 APN Configuration Mode Commands ▀ ip access-group ip access-group Configures an IPv4/IPv6 access group for the current APN profile....
  • Page 1367APN Configuration Mode Commands ip access-group ▀ Run command without fallback-enabled option to disable ACL fallback for a previously configured...
  • Page 1368 APN Configuration Mode Commands ▀ ip address alloc-method ip address alloc-method Configures the method by which this APN will...
  • Page 1369APN Configuration Mode Commands ip address alloc-method ▀ Important: If this option is used, the name of the IP address...
  • Page 1370 APN Configuration Mode Commands ▀ ip address alloc-method ip address alloc-method dhcp-proxy The following command configures the APN to...
  • Page 1371APN Configuration Mode Commands ip address alloc-method ▀ Figure 3. IP Address Allocation Process Command Line Interface Reference, StarOS Release...
  • Page 1372 APN Configuration Mode Commands ▀ ip address pool ip address pool Configures the name of an IP address pool...
  • Page 1373APN Configuration Mode Commands ip address pool ▀ The following command configures the system to use a pool named private_pool1...
  • Page 1374 APN Configuration Mode Commands ▀ ip address pool-exhaust-action ip address pool-exhaust-action Configures the behavior to accept/reject a call if...
  • Page 1375APN Configuration Mode Commands ip context-name ▀ ip context-name Configures the name of the destination context to use for subscribers...
  • Page 1376 APN Configuration Mode Commands ▀ ip header-compression ip header-compression Configures IP packet header compression parameters for this APN. Product...
  • Page 1377APN Configuration Mode Commands ip hide-service-address ▀ ip hide-service-address Renders the IP address of the GGSN unreachable from mobile stations...
  • Page 1378 APN Configuration Mode Commands ▀ ip local-address ip local-address Configures the local-side IP address of the subscriber's point-to-point connection....
  • Page 1379APN Configuration Mode Commands ip multicast discard ▀ ip multicast discard Configures the IP multicast discard packet behavior. Product GGSN...
  • Page 1380 APN Configuration Mode Commands ▀ ip qos-dscp ip qos-dscp Configures the quality of service (QoS) differentiated service code point...
  • Page 1381APN Configuration Mode Commands ip qos-dscp ▀ Allocation Priority 1 2 3 2 ef ef ef 3 af21 af21 af21...
  • Page 1382 APN Configuration Mode Commands ▀ ip qos-dscp + More than one of the above keywords can be entered within...
  • Page 1383APN Configuration Mode Commands ip source-violation ▀ ip source-violation Enables or disables packet source validation for the current APN. Product...
  • Page 1384 APN Configuration Mode Commands ▀ ip source-violation Source validation requires the source address of received packets to match the...
  • Page 1385APN Configuration Mode Commands ip user-datagram-tos copy ▀ ip user-datagram-tos copy Controls the copying of the IP ToS octet value...
  • Page 1386 APN Configuration Mode Commands ▀ ipv6 access-group ipv6 access-group Configures the IPv6 access group for the current APN profile...
  • Page 1387APN Configuration Mode Commands ipv6 access-group ▀ Usage Use this command to apply a single IPv6 access control list to...
  • Page 1388 APN Configuration Mode Commands ▀ ipv6 address alloc-method ipv6 address alloc-method Controls the IPv6 address allocation method for a...
  • Page 1389APN Configuration Mode Commands ipv6 address alloc-method ▀ APN. The static address allocation can be enabled by the use of...
  • Page 1390 APN Configuration Mode Commands ▀ ipv6 address prefix-delegation-len ipv6 address prefix-delegation-len Configures the supported prefix length to 48/52/56 bit...
  • Page 1391APN Configuration Mode Commands ipv6 address pool-exhaust-action ▀ ipv6 address pool-exhaust-action Configures the behavior to accept/reject a call if the...
  • Page 1392 APN Configuration Mode Commands ▀ ipv6 dns ipv6 dns Configures primary and secondary IPv6 Domain Name Service (DNS) servers....
  • Page 1393APN Configuration Mode Commands ipv6 dns ▀ Important: The same preference would be applicable for the NBNS (NetBIOS Name Service)...
  • Page 1394 APN Configuration Mode Commands ▀ ipv6 egress-address-filtering ipv6 egress-address-filtering Enables or disable IIPv6 egress address filtering. This function filters...
  • Page 1395APN Configuration Mode Commands ipv6 initial-router-advt ▀ ipv6 initial-router-advt Creates an IPv6 initial router advertisement interval for the current APN....
  • Page 1396 APN Configuration Mode Commands ▀ l3-to-l2-tunnel address-policy l3-to-l2-tunnel address-policy Configures the address allocation/validation policy, when subscriber L3 (IPv4/IPv6) sessions...
  • Page 1397APN Configuration Mode Commands loadbalance-tunnel-peers ▀ loadbalance-tunnel-peers Configures how tunnel-peers are selected for this APN. Product GGSN P-GW SAEGW Privilege...
  • Page 1398 APN Configuration Mode Commands ▀ long-duration-action detection long-duration-action detection Sets the detection of a session that exceeds the long...
  • Page 1399APN Configuration Mode Commands long-duration-action disconnection ▀ long-duration-action disconnection Specifies what action is taken when the long duration timer expires....
  • Page 1400 APN Configuration Mode Commands ▀ long-duration-action disconnection Use the following command to disconnect the session that exceed the long...
  • Page 1401APN Configuration Mode Commands mbms bmsc-profile ▀ mbms bmsc-profile Applies a configured Broadcast-Multicast Service Center (BM-SC) profile to subscribers through...
  • Page 1402 APN Configuration Mode Commands ▀ mbms bmsc-profile mbms bmsc-profile name bm_sc_1 ▄ Command Line Interface Reference, StarOS Release 18...
  • Page 1403APN Configuration Mode Commands mbms bearer timeout ▀ mbms bearer timeout Configures the session timeout values for the Multimedia Broadcast...
  • Page 1404 APN Configuration Mode Commands ▀ mbms bearer timeout Example The following commands enables an absolute time timeout of 60000...
  • Page 1405APN Configuration Mode Commands mbms ue timeout ▀ mbms ue timeout Configures the session timeout values for the Multimedia Broadcast...
  • Page 1406 APN Configuration Mode Commands ▀ mediation-device mediation-device Enables the use of a mediation device and specifies the system context...
  • Page 1407APN Configuration Mode Commands mediation-device ▀ If “no-early-PDUs” is enabled, the chassis does not send uplink/downlink data from/to a MS...
  • Page 1408 APN Configuration Mode Commands ▀ mobile-ip home-agent mobile-ip home-agent Configures the IP address of the home agent (HA) used...
  • Page 1409APN Configuration Mode Commands mobile-ip min-reg-lifetime-override ▀ mobile-ip min-reg-lifetime-override Specifies the minimum registration timer to override the platform-wide default on...
  • Page 1410 APN Configuration Mode Commands ▀ mobile-ip mn-aaa-removal-indication mobile-ip mn-aaa-removal-indication Configures the system to remove various information elements when relaying...
  • Page 1411APN Configuration Mode Commands mobile-ip mn-ha-hash-algorithm ▀ mobile-ip mn-ha-hash-algorithm Designates the encryption algorithm to use for Hash-based Message Authentication Code...
  • Page 1412 APN Configuration Mode Commands ▀ mobile-ip mn-ha-shared-key mobile-ip mn-ha-shared-key Configures the subscriber MobileNode-Home Agent (MN-HA) shared key. Product GGSN...
  • Page 1413APN Configuration Mode Commands mobile-ip mn-ha-spi ▀ mobile-ip mn-ha-spi Configures the Mobile IP Security Parameter Index (SPI). Product GGSN P-GW...
  • Page 1414 APN Configuration Mode Commands ▀ mobile-ip required mobile-ip required Enables support for Mobile IP functionality for all PDP contexts...
  • Page 1415APN Configuration Mode Commands mobile-ip reverse-tunnel ▀ mobile-ip reverse-tunnel Configures the system to support reverse-tunneling for Mobile IP sessions facilitated...
  • Page 1416 APN Configuration Mode Commands ▀ nai-construction nai-construction Configures the Network Access Identifier (NAI) construction parameters on a per-APN basis...
  • Page 1417APN Configuration Mode Commands nai-construction ▀ password Configures the authentication user-password for this NAI-constructed user. password is an alphanumeric string...
  • Page 1418 APN Configuration Mode Commands ▀ nbns nbns Configures and enables use of NetBios Name Service (NBNS) for the APN....
  • Page 1419APN Configuration Mode Commands network-behind-mobile ▀ network-behind-mobile Allows enabling/disabling the Network Behind Mobile Station (NBMS) for the APN. Product GGSN...
  • Page 1420 APN Configuration Mode Commands ▀ network-behind-mobile network-behind-mobile max-subnets 16 ▄ Command Line Interface Reference, StarOS Release 18 1420
  • Page 1421APN Configuration Mode Commands nexthop-forwarding-address ▀ nexthop-forwarding-address Configures the next hop forwarding address for the APN. Product GGSN P-GW SAEGW...
  • Page 1422 APN Configuration Mode Commands ▀ npu qos npu qos Configures an NPU QoS priority queue for packets facilitated by...
  • Page 1423APN Configuration Mode Commands outbound ▀ outbound Configures the APN host username and password. Product GGSN P-GW SAEGW Privilege Security...
  • Page 1424 APN Configuration Mode Commands ▀ outbound determine the password if an outbound username and password are configured for the...
  • Page 1425APN Configuration Mode Commands p-cscf ▀ p-cscf Enables use of locally configured Proxy Call Session Control Function (P-CSCF) addresses or...
  • Page 1426 APN Configuration Mode Commands ▀ p-cscf priority address_ priority [ ip IPv4_address | ipv6 IPv6_address ] Specifies the priority...
  • Page 1427APN Configuration Mode Commands pco-options ▀ pco-options This command controls the sending of customized PCO (Protocol Configuration Options) options in...
  • Page 1428 APN Configuration Mode Commands ▀ pco-options Usage Use this command to enable or disable sending of customized PCO options...
  • Page 1429APN Configuration Mode Commands pdn-behavior ▀ pdn-behavior Configures specific PDN behavior. Product P-GW Privilege Security Administrator, Administrator Mode Exec >...
  • Page 1430 APN Configuration Mode Commands ▀ pdp-type pdp-type Configures the type of PDP contexts that are supported by this APN....
  • Page 1431APN Configuration Mode Commands pdp-type ▀ Usage IP PDP context types are those in which the MS is communicating with...
  • Page 1432 APN Configuration Mode Commands ▀ permission permission Enables or disables the ability to use authorized services for the current...
  • Page 1433APN Configuration Mode Commands policy ▀ policy Configures the Mobile IPv6 policy to set the action to be taken when...
  • Page 1434 APN Configuration Mode Commands ▀ policy Usage This command sets the Mobile IPv6 policy for the action to be...
  • Page 1435APN Configuration Mode Commands ppp ▀ ppp Configures the Point-to-Point Protocol (PPP) options for the current APN. Product GGSN P-GW...
  • Page 1436 APN Configuration Mode Commands ▀ ppp keepalive seconds Specifies the frequency of sending the Link Control Protocol (LCP) keep...
  • Page 1437APN Configuration Mode Commands proxy-mip ▀ proxy-mip Configures support for Proxy Mobile IP functionality for the APN. Product GGSN FA...
  • Page 1438 APN Configuration Mode Commands ▀ proxy-mip The following command causes the system to support Proxy Mobile IP for all...
  • Page 1439APN Configuration Mode Commands qci ▀ qci Specifies the QoS Class Index (QCI) value to be used to mark bearers...
  • Page 1440 APN Configuration Mode Commands ▀ qci  A GGSN call connected to this APN will not be classified as...
  • Page 1441APN Configuration Mode Commands qos negotiate-limit ▀ qos negotiate-limit Cconfigures the QoS profile to provide the peak and committed data...
  • Page 1442 APN Configuration Mode Commands ▀ qos negotiate-limit Important: System measurements for this value exclude the GTP and outer packet...
  • Page 1443APN Configuration Mode Commands qos negotiate-limit ▀ qos negotiate-limit direction uplink peak-data-rate 128000 Command Line Interface Reference, StarOS Release 18...
  • Page 1444 APN Configuration Mode Commands ▀ qos rate-limit qos rate-limit Configures the action on a subscriber traffic flow that violates...
  • Page 1445APN Configuration Mode Commands qos rate-limit ▀ bytes must be an integer from 1 through 6000000. Important: It is recommended...
  • Page 1446 APN Configuration Mode Commands ▀ qos rate-limit Important: If the exceed/violate action is set to “lower-ip-precedence”, this command may...
  • Page 1447APN Configuration Mode Commands qos-renegotiate ▀ qos-renegotiate This keyword is obsolete. Command Line Interface Reference, StarOS Release 18 ▄ 1447...
  • Page 1448 APN Configuration Mode Commands ▀ qos traffic-police qos traffic-police This command is obsolete. This functionality is now supported through...
  • Page 1449APN Configuration Mode Commands radius ▀ radius This command is obsolete. Command Line Interface Reference, StarOS Release 18 ▄ 1449...
  • Page 1450 APN Configuration Mode Commands ▀ radius group radius group This command is obsolete. ▄ Command Line Interface Reference, StarOS...
  • Page 1451APN Configuration Mode Commands radius returned-framed-ip-address ▀ radius returned-framed-ip-address Sets the policy whether or not to reject a call when...
  • Page 1452 APN Configuration Mode Commands ▀ radius returned-username radius returned-username Configures the username that is returned in accounting messages. If...
  • Page 1453APN Configuration Mode Commands radius returned-username ▀ default radius returned-username Command Line Interface Reference, StarOS Release 18 ▄ 1453
  • Page 1454 APN Configuration Mode Commands ▀ reporting-action reporting-action Enables the reporting of APN-related events to a log. By default, reporting...
  • Page 1455APN Configuration Mode Commands restriction-value ▀ restriction-value Configures the level of restriction to ensure controlled co-existence of the Primary PDP...
  • Page 1456 APN Configuration Mode Commands ▀ restriction-value  If value = 2, then PDP contexts with restriction values of 0,...
  • Page 1457APN Configuration Mode Commands secondary ip pool ▀ secondary ip pool This command specifies a secondary IP pool to be...
  • Page 1458 APN Configuration Mode Commands ▀ selection-mode selection-mode Configures the level of verification that will be used to ensure a...
  • Page 1459APN Configuration Mode Commands selection-mode ▀ Example The following command specifies that the MS’s subscription will not be verified and...
  • Page 1460 APN Configuration Mode Commands ▀ timeout timeout Configures the session timeout values for this APN. Product GGSN P-GW SAEGW...
  • Page 1461APN Configuration Mode Commands timeout ▀ del-cause { none | reactiv-req } When subscribers are deleted due to APN timeouts,...
  • Page 1462 APN Configuration Mode Commands ▀ timeout bearer-inactivity timeout bearer-inactivity This command configures the bearer inactivity timer and the threshold...
  • Page 1463APN Configuration Mode Commands timeout bearer-inactivity ▀ gbr Specifies that the GGSN/GW will check for low activity on a GBR...
  • Page 1464 APN Configuration Mode Commands ▀ timeout bearer-inactivity Important: This option is only valid when Cause IE Enhancement for Delete...
  • Page 1465APN Configuration Mode Commands timeout emergency-inactivity ▀ timeout emergency-inactivity Configures the emergency session inactivity-timeout for this APN. The APN must...
  • Page 1466 APN Configuration Mode Commands ▀ timeout idle timeout idle Configures the idle timeout duration for the long duration timer...
  • Page 1467APN Configuration Mode Commands timeout idle ▀ Usage Use this command to set the idle time duration for subscriber session...
  • Page 1468 APN Configuration Mode Commands ▀ timeout idle micro-checkpoint-periodicity timeout idle micro-checkpoint-periodicity Enables configuration of periodic idle seconds micro checkpoint...
  • Page 1469APN Configuration Mode Commands timeout idle micro-checkpoint-periodicity ▀ Usage Use this command to set the idle time duration and micro-checkpoint-periodicity...
  • Page 1470 APN Configuration Mode Commands ▀ timeout long-duration timeout long-duration Configures the long duration timeout and inactivity duration for subscriber...
  • Page 1471APN Configuration Mode Commands timeout long-duration ▀ timeout long-duration 300 inactivity-time 45 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 1472 APN Configuration Mode Commands ▀ tunnel address-policy tunnel address-policy This command specifies the address allocation/validation policy for all tunneled...
  • Page 1473APN Configuration Mode Commands tunnel address-policy ▀ Use the following command to reset the IP address validation policy to validate...
  • Page 1474 APN Configuration Mode Commands ▀ tunnel gre tunnel gre Configures Generic Routing Encapsulation (GRE) tunnel parameters between the GGSN...
  • Page 1475APN Configuration Mode Commands tunnel gre ▀ Example The following command configures the system to encapsulate subscriber traffic using GRE...
  • Page 1476 APN Configuration Mode Commands ▀ tunnel ipip tunnel ipip Configures IP-in-IP tunnelling parameters between the GGSN and an external...
  • Page 1477APN Configuration Mode Commands tunnel ipip ▀ tunnel ipip peer-address 192.168.1.225 local-address 192.168.1.100 preference 1 Command Line Interface Reference, StarOS...
  • Page 1478 APN Configuration Mode Commands ▀ tunnel ipsec tunnel ipsec This command configures sessions for the current APN to use...
  • Page 1479APN Configuration Mode Commands tunnel l2tp ▀ tunnel l2tp Configures Layer 2 Tunnelling Protocol (L2TP) parameters between the GGSN and...
  • Page 1480 APN Configuration Mode Commands ▀ tunnel l2tp preference num Default: 1 Specifies the preference of the tunnel if the...
  • Page 1481APN Configuration Mode Commands tunnel l2tp ▀ Usage This command can be used to configure the GGSN to tunnel subscriber...
  • Page 1482 APN Configuration Mode Commands ▀ virtual-apn gdcr virtual-apn gdcr Defines which APN (Gn or virtual) is used in charging...
  • Page 1483APN Configuration Mode Commands virtual-apn preference ▀ virtual-apn preference Defines one or more criteria used to redirect a call received...
  • Page 1484 APN Configuration Mode Commands ▀ virtual-apn preference access-gw-address { ip_address | ip_address/mask } Specifies the Access Gateway (SGSN/SGW/Other) IP...
  • Page 1485APN Configuration Mode Commands virtual-apn preference ▀ msisdn-range from msisdn_start_range to msisdn_to_range Specifies the MSISDN range. msisdn_start_range is the starting...
  • Page 1486 APN Configuration Mode Commands ▀ virtual-apn preference The functionality provided by this command can also be used to restrict...
  • Page 1487APN Configuration Mode Commands virtual-apn preference ▀ virtual-apn preference 3 apn bigco.com access-gateway-address 192.168.62.2 virtual-apn preference 4 apn bigco.co.kr access-gateway-address...
  • Page 1488
  • Page 1489: Chapter 24 APN Profile Configuration ModeChapter 24 APN Profile Configuration Mode The APN Profile configuration mode defines a set of parameters controlling the SGSN or...
  • Page 1490 APN Profile Configuration Mode ▀ accounting context accounting context This command allows you to define the name of the...
  • Page 1491APN Profile Configuration Mode accounting mode ▀ accounting mode This command allows you to define the mode of accounting to...
  • Page 1492 APN Profile Configuration Mode ▀ address-resolution-mode address-resolution-mode Identifies the address resolution mode for this APN profile. Important: From release...
  • Page 1493APN Profile Configuration Mode apn-resolve-dns-query ▀ apn-resolve-dns-query Command enables the SGSN to send Straightforward Name Authority Pointer (SNAPTR) type DNS...
  • Page 1494 APN Profile Configuration Mode ▀ apn-restoration apn-restoration Configures the APN restoration priority value. Product MME SGSN Privilege Security Administrator,...
  • Page 1495APN Profile Configuration Mode apn-type ▀ apn-type Identifies the type of APN as an IMS APN. Product SGSN Privilege Security...
  • Page 1496 APN Profile Configuration Mode ▀ associate accounting-policy associate accounting-policy Associates the APN with specific pre-configured policies configured in the...
  • Page 1497APN Profile Configuration Mode associate qci-qos-mapping ▀ associate qci-qos-mapping Provides operators with a configuration to associate a Qos Class Identifier...
  • Page 1498 APN Profile Configuration Mode ▀ associate quality-of-service-profile associate quality-of-service-profile Associates the specified Quality of Service profile with the APN...
  • Page 1499APN Profile Configuration Mode associate sgw-paging-profile ▀ associate sgw-paging-profile This command allows the association of an SGW Paging Profile with...
  • Page 1500 APN Profile Configuration Mode ▀ active-charging rulebase active-charging rulebase Configure the name of the rulebase that contains the charging...
  • Page 1501APN Profile Configuration Mode cc ▀ cc Configures the charging characteristics (CC) for this APN profile. Product SGSN S-GW SAEGW...
  • Page 1502 APN Profile Configuration Mode ▀ cc  hlr-value-for-scdrs: instructs the system to use charging characteristic settings received from the...
  • Page 1503APN Profile Configuration Mode dedicated-bearers ▀ dedicated-bearers Configures the MME to either accept or reject dedicated GBR and Non-GBR bearers....
  • Page 1504 APN Profile Configuration Mode ▀ description description Defines a descriptive string relevant to the specific APN profile. Product MME...
  • Page 1505APN Profile Configuration Mode dhcp lease ▀ dhcp lease Configures a lease period for the UE's IP address during SaMOG...
  • Page 1506 APN Profile Configuration Mode ▀ dhcp lease Usage Use this command to configure a lease period for the UE's...
  • Page 1507APN Profile Configuration Mode direct-tunnel ▀ direct-tunnel Defines the permission for direct tunnel establishment by GGSNs. This command is specific...
  • Page 1508 APN Profile Configuration Mode ▀ dns dns Configure the primary and secondary IPv4 or IPv6 address of the DNS...
  • Page 1509APN Profile Configuration Mode dns-extn ▀ dns-extn Takes an offset group of digits from the MSISDN and appends the digits...
  • Page 1510 APN Profile Configuration Mode ▀ dns-extn Usage With this command, the APN in the DNS query string, used for...
  • Page 1511APN Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 1512 APN Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1513APN Profile Configuration Mode gn-gtp-version ▀ gn-gtp-version This command enables the operator to prevent the SGSN from attempting GTPv0 Requests...
  • Page 1514 APN Profile Configuration Mode ▀ gn-gtp-version The following command deletes the previous configuration and re-enables the default so the...
  • Page 1515APN Profile Configuration Mode gateway-address ▀ gateway-address Configures the IPv4 or IPv6 address of the GGSN supporting the APN associated...
  • Page 1516 APN Profile Configuration Mode ▀ gateway-address secondary-pool This optional keyword allows the operator to enable multiple GGSN pools by...
  • Page 1517APN Profile Configuration Mode gtp ▀ gtp Enables or disables the GTPC private extension for the Overcharging Protection feature. This...
  • Page 1518 APN Profile Configuration Mode ▀ gtp gtp private-extension loss-of-radio-coverage send-to-ggsn ▄ Command Line Interface Reference, StarOS Release 18 1518...
  • Page 1519APN Profile Configuration Mode idle-mode-acl ▀ idle-mode-acl Configures a group of access control lists (ACLs) that define rules to apply...
  • Page 1520 APN Profile Configuration Mode ▀ ip ip Defines the IP parameters for this APN profile. Product SGSN S-GW SAEGW...
  • Page 1521APN Profile Configuration Mode ip ▀  conversational - Configures the DSCP marking to be used for packets of sessions...
  • Page 1522 APN Profile Configuration Mode ▀ ip  linked-pdp - deactivate all associated pdp contexts (primary and secondary). Default is...
  • Page 1523APN Profile Configuration Mode ip access-group ▀ ip access-group Configure the name of the access control list (ACL) for incoming...
  • Page 1524 APN Profile Configuration Mode ▀ ip address pool ip address pool Configure the name of the IP address pool...
  • Page 1525APN Profile Configuration Mode ip context-name ▀ ip context-name Configure the name of the context where the IP pool configuration...
  • Page 1526 APN Profile Configuration Mode ▀ isr-sequential-paging isr-sequential-paging Enables or disables the Intelligent Paging for ISR feature. Product S-GW SAEGW...
  • Page 1527APN Profile Configuration Mode ipv6 ▀ ipv6 Configures the IPv6 pool name to be used by SaMOG if the 'Framed-IPv6-Pool'...
  • Page 1528 APN Profile Configuration Mode ▀ ipv6 num-advts num_advts Configure the number of times unsolicited router advertisement must be sent....
  • Page 1529APN Profile Configuration Mode local-offload ▀ local-offload Enables or disables the SaMOG Local Breakout (LBO) Enhanced, LBO Basic, or Flow-based...
  • Page 1530 APN Profile Configuration Mode ▀ location-reporting location-reporting Configure location change reporting via ULI IE per APN for an S4-SGSN....
  • Page 1531APN Profile Configuration Mode mobility-protocol ▀ mobility-protocol This command allows you to configure the default mobility protocol type to be...
  • Page 1532 APN Profile Configuration Mode ▀ ntsr ntsr This command configures QCI and ARP in the apn-profile for Network Triggered...
  • Page 1533APN Profile Configuration Mode ntsr ▀ ntsr all Command Line Interface Reference, StarOS Release 18 ▄ 1533
  • Page 1534 APN Profile Configuration Mode ▀ overcharge-protection overcharge-protection Enables overcharge protection for APNs controlled by this APN profile. Each overcharging...
  • Page 1535APN Profile Configuration Mode overcharge-protection ▀ Usage Use this command to specify P-GW to pause charging on abnormal-s1-release, DDN failure...
  • Page 1536 APN Profile Configuration Mode ▀ pdp-data-inactivity pdp-data-inactivity Configures the APN profile regarding PDP data inactivity. This command is specific...
  • Page 1537APN Profile Configuration Mode pdp-data-inactivity ▀ Usage Use this command to define how the SGSN will handle a situation where...
  • Page 1538 APN Profile Configuration Mode ▀ pdp-type-ipv4v6-override pdp-type-ipv4v6-override Configure the PDP type to use, per APN, if dual PDP type...
  • Page 1539APN Profile Configuration Mode pgw-address ▀ pgw-address Configures the IPv4 or IPv6 address of the P-GW supporting the APN associated...
  • Page 1540 APN Profile Configuration Mode ▀ pgw-address On the S4-SGSN, use this command to configure a local P-GW address for...
  • Page 1541APN Profile Configuration Mode qos allow-upgrade ▀ qos allow-upgrade Configure this command to allow upgrade of QoS from GGSN. The...
  • Page 1542 APN Profile Configuration Mode ▀ qos allow-upgrade Use the following command to configure QoS upgrade support in a UMTS...
  • Page 1543APN Profile Configuration Mode qos apn-ambr ▀ qos apn-ambr Configures the APN-AMBR (aggregate maximum bit rate) that will be stored...
  • Page 1544 APN Profile Configuration Mode ▀ qos class qos class Configures local values for the traffic class (TC) parameters for...
  • Page 1545APN Profile Configuration Mode qos class ▀ All qualifying options are explained below. conversational Selects the ‘real-time’ conversational traffic class...
  • Page 1546 APN Profile Configuration Mode ▀ qos class streaming Selects the streaming traffic class of service, which handles one-way, real-time...
  • Page 1547APN Profile Configuration Mode qos class ▀ QoS Parameter Predefined Value SDU delivery order No Delivery of Erroneous SDUs No...
  • Page 1548 APN Profile Configuration Mode ▀ qos class QoS Parameter Predefined Value SDU Error Ratio 7 (1 * 10 ^...
  • Page 1549APN Profile Configuration Mode qos class ▀  4: represents 4*10^-3  7: represents 10^-5  9: represents 6*10^-8 ...
  • Page 1550 APN Profile Configuration Mode ▀ qos class Repeat the command as often as needed with different options to define...
  • Page 1551APN Profile Configuration Mode qos dedicated-bearer ▀ qos dedicated-bearer Configures the quality of service maximum bit rate (MBR) parameters for...
  • Page 1552 APN Profile Configuration Mode ▀ qos default-bearer qos default-bearer Configures the quality of service parameters for the default bearer....
  • Page 1553APN Profile Configuration Mode qos default-bearer ▀ qos default-bearer arp 2 preemption-capability may Command Line Interface Reference, StarOS Release 18...
  • Page 1554 APN Profile Configuration Mode ▀ qos pgw-upgrade qos pgw-upgrade Configures the action to be taken when the MME receives...
  • Page 1555APN Profile Configuration Mode qos pgw-upgrade ▀ In the case of an Attach Reject or PDN Connectivity Reject, the ESM...
  • Page 1556 APN Profile Configuration Mode ▀ qos prefer-as-cap qos prefer-as-cap Specifies operational preferences for QoS parameters, specifically QoS bit rates....
  • Page 1557APN Profile Configuration Mode qos prefer-as-cap ▀ hlr-subscription Instructs the SGSN to take the QoS bit rates from the HLR...
  • Page 1558 APN Profile Configuration Mode ▀ qos rate-limit direction qos rate-limit direction Configures the actions governing the subscriber traffic flow,...
  • Page 1559APN Profile Configuration Mode qos rate-limit direction ▀  duration seconds: Must be an integer from 1 to 30; default...
  • Page 1560 APN Profile Configuration Mode ▀ qos rate-limit direction committed-auto-readjust duration seconds: Must be an integer from 1 to 30....
  • Page 1561APN Profile Configuration Mode qos rate-limit direction ▀ Downlink Traffic: Disabled Uplink Traffic: Disabled Peak Data Rate (in bps): 16000000...
  • Page 1562 APN Profile Configuration Mode ▀ ranap allocation-retention-priority-ie ranap allocation-retention-priority-ie Configures the allocation/retention priority (ARP) IE for this APN profile....
  • Page 1563APN Profile Configuration Mode ranap allocation-retention-priority-ie ▀  streaming: streaming class of service Default values will be included in the...
  • Page 1564 APN Profile Configuration Mode ▀ ranap allocation-retention-priority-ie Subscribed Traffic Class RANAP Priority RANAP Preemption RANAP Preemption RANAP Queuing ARP...
  • Page 1565APN Profile Configuration Mode restrict access-type ▀ restrict access-type Configures the activation restrictions of PDP context on the basis of...
  • Page 1566 APN Profile Configuration Mode ▀ restrict access-type Usage Use this command to configure the restriction rules in an APN...
  • Page 1567APN Profile Configuration Mode sm t3396 ▀ sm t3396 The sm command includes a new keyword to set the SM...
  • Page 1568 APN Profile Configuration Mode ▀ sm t3396 Example Use a command similar to the following to define a T3396...
  • Page 1569APN Profile Configuration Mode timeout bearer-inactivity ▀ timeout bearer-inactivity Supports a bearer inactivity timeout for GBR and non-GBR S-GW bearer...
  • Page 1570 APN Profile Configuration Mode ▀ timeout bearer-inactivity uplinkbytes Specifies that an uplink data volume threshold will be used. bytes...
  • Page 1571APN Profile Configuration Mode twan ▀ twan Configures the APN profile with the default gateway address and mask to be...
  • Page 1572 APN Profile Configuration Mode ▀ virtual-mac virtual-mac Configures or validates the virtual MAC address for this APN profile to...
  • Page 1573APN Profile Configuration Mode virtual-mac ▀ virtual-mac AB:12:22:34:f5:0E Command Line Interface Reference, StarOS Release 18 ▄ 1573
  • Page 1574
  • Page 1575: Chapter 25 APN Remap Table Configuration ModeChapter 25 APN Remap Table Configuration Mode APN Remap Table Configuration mode provides the commands to configure parameters for multiple...
  • Page 1576 APN Remap Table Configuration Mode ▀ apn-remap apn-remap Creates an entry in the APN remap table and provides the...
  • Page 1577APN Remap Table Configuration Mode apn-remap ▀ apn_op_id is a string of 1 to 18 characters including digits, letters, and...
  • Page 1578 APN Remap Table Configuration Mode ▀ apn-remap apn-remap network-identifier * value-for-ni-wc newnet.com A one-to-one APN OI remap entry is...
  • Page 1579APN Remap Table Configuration Mode apn-selection-default ▀ apn-selection-default Enables and configures or disables the Default APN feature for use when...
  • Page 1580 APN Remap Table Configuration Mode ▀ apn-selection-default network-identifier apn_net_id Specifies the network identifier will be used as the default...
  • Page 1581APN Remap Table Configuration Mode apn-selection-default ▀ Important: For SGSN ONLY - Beginning with Release 16, customers already using an...
  • Page 1582 APN Remap Table Configuration Mode ▀ apn-selection-default The following command enables the default APN feature for APN HomeNet1 in...
  • Page 1583APN Remap Table Configuration Mode blank-apn ▀ blank-apn Enables the Blank APN feature and defines the APN that will be...
  • Page 1584 APN Remap Table Configuration Mode ▀ cc cc This command maps an APN override based on charging characteristics. Product...
  • Page 1585APN Remap Table Configuration Mode cc ▀ Usage Use this command to enable APN remapping only when the charging characteristic...
  • Page 1586 APN Remap Table Configuration Mode ▀ description description Defines a string that describes this APN remap table. Product MME...
  • Page 1587APN Remap Table Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1588 APN Remap Table Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1589APN Remap Table Configuration Mode wildcard-apn ▀ wildcard-apn Enables or disables the Wildcard APN feature and define the default APN...
  • Page 1590 APN Remap Table Configuration Mode ▀ wildcard-apn  the UE requested a PDP type of IPv4v6  the UE...
  • Page 1591: Chapter 26 ARP-RP Mapping Profile Configuration ModeChapter 26 ARP-RP Mapping Profile Configuration Mode The commands in this mode configure the various parameters of the ARP-RP Mapping...
  • Page 1592 ARP-RP Mapping Profile Configuration Mode ▀ arp arp This command modifies the ARP (allocation retention priority) to RP (radio...
  • Page 1593ARP-RP Mapping Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1594 ARP-RP Mapping Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1595: Chapter 27 ATM Port Configuration Mode CommandsChapter 27 ATM Port Configuration Mode Commands The Asynchronous Transfer Mode (ATM) port configuration mode provides the commands to create,...
  • Page 1596 ATM Port Configuration Mode Commands ▀ clock-source clock-source This command sets the source of the port’s transmit clock. Product...
  • Page 1597ATM Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the port. Product SGSN...
  • Page 1598 ATM Port Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1599ATM Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1600 ATM Port Configuration Mode Commands ▀ line-timing line-timing This command enables the SPIO to recover transmit timing source via...
  • Page 1601ATM Port Configuration Mode Commands loopback ▀ loopback Enables/disables loopback and configures the type of loopback mode used for diagnostic...
  • Page 1602 ATM Port Configuration Mode Commands ▀ preferred slot preferred slot This command identifies which card in a chassis assumes...
  • Page 1603ATM Port Configuration Mode Commands pvc ▀ pvc This command creates a Permanent Virtual Connection (PVC), including the definition of...
  • Page 1604 ATM Port Configuration Mode Commands ▀ pvc cps-payload-size cps_payload_value This keyword configures the Common Part Sublayer (CPS) payload in...
  • Page 1605ATM Port Configuration Mode Commands shutdown ▀ shutdown Terminates all processes supporting the port or blocks the shutting down of...
  • Page 1606 ATM Port Configuration Mode Commands ▀ snmp trap link-status snmp trap link-status Enables/disables the generation and sending of an...
  • Page 1607ATM Port Configuration Mode Commands threshold high-activity ▀ threshold high-activity Configures the port’s high and low activity thresholds. Product SGSN...
  • Page 1608 ATM Port Configuration Mode Commands ▀ threshold high-activity If a trigger condition occurs within the polling interval, the alert...
  • Page 1609ATM Port Configuration Mode Commands threshold monitoring ▀ threshold monitoring Enables thresholding for port-level values. Product HNB-GW SGSN Privilege Security...
  • Page 1610 ATM Port Configuration Mode Commands ▀ threshold monitoring Table 19. Thresholding Reporting Mechanisms by Model Model SNMP Traps Logs...
  • Page 1611ATM Port Configuration Mode Commands threshold rx-utilization ▀ threshold rx-utilization Configures thresholds for receive-port utilization. Product HNB-GW SGSN Privilege Security...
  • Page 1612 ATM Port Configuration Mode Commands ▀ threshold rx-utilization Usage Receive port utilization thresholds generate alerts or alarms based on...
  • Page 1613ATM Port Configuration Mode Commands threshold tx-utilization ▀ threshold tx-utilization Configures thresholds for transmit port utilization. Product HNB-GW SGSN Privilege...
  • Page 1614 ATM Port Configuration Mode Commands ▀ threshold tx-utilization Important: Ports configured for half-duplex do not differentiate between data received...
  • Page 1615ATM Port Configuration Mode Commands toh-sdsf ▀ toh-sdsf Enable/disable line SDSF BER thresholds and configure the line transport overhead (TOH)...
  • Page 1616 ATM Port Configuration Mode Commands ▀ toh-sdsf The SD is kept at a value of 100 erroredBits/sec less than...
  • Page 1617: Chapter 28 BFD Configuration Mode CommandsChapter 28 BFD Configuration Mode Commands The BFD Configuration Mode manages the protocol settings for Bidirectional Forwarding Detection (BFD). BFD...
  • Page 1618 BFD Configuration Mode Commands ▀ bfd linkagg-peer bfd linkagg-peer Enables member-link based BFD and configures the BFD link aggregation...
  • Page 1619BFD Configuration Mode Commands bfd linkagg-peer ▀ multiplier multiplier_value Specifies the value used to compute hold-down time as an integer...
  • Page 1620 BFD Configuration Mode Commands ▀ bfd multihop-peer bfd multihop-peer Configures parameters for any multihop-BFD sessions with the same destination...
  • Page 1621BFD Configuration Mode Commands bfd multihop-peer ▀ peers, the BFD sessions to the destination address will not come UP. If...
  • Page 1622 BFD Configuration Mode Commands ▀ bfd nbr-group-name bfd nbr-group-name Configures BFD neighbor groups. Product All Privilege Security Administrator, Administrator...
  • Page 1623BFD Configuration Mode Commands bfd nbr-group-name ▀ bfd nbr-group-name bgpgroup132 active-if-name bgpif02 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 1624 BFD Configuration Mode Commands ▀ echo echo Enables or disables BFD echo mode functionality. The Echo function tests the...
  • Page 1625BFD Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 1626 BFD Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1627BFD Configuration Mode Commands slow-timers ▀ slow-timers Specifies the asynchronous mode control packet interval when Echo mode is enabled. In...
  • Page 1628
  • Page 1629: Chapter 29 BGP Address-Family (IPv4/IPv6) Configuration Mode CommandsChapter 29 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (IPv4/IPv6) Configuration Mode is used to...
  • Page 1630 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1631BGP Address-Family (IPv4/IPv6) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1632 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ maximum-paths maximum-paths Controls the maximum number of parallel external BGP (eBGP) or...
  • Page 1633BGP Address-Family (IPv4/IPv6) Configuration Mode Commands maximum-paths ▀ no maximum-paths ebgp Command Line Interface Reference, StarOS Release 18 ▄ 1633...
  • Page 1634 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ neighbor neighbor Configures the IPv4/IPv6 Address Family for BGP routers that interconnect...
  • Page 1635BGP Address-Family (IPv4/IPv6) Configuration Mode Commands neighbor ▀ default-originate [ route-map map_name ] Specifies the default originate routes to this...
  • Page 1636 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ neighbor remove-private-AS Removes the private AS number from outbound updates. Default: Do...
  • Page 1637BGP Address-Family (IPv4/IPv6) Configuration Mode Commands neighbor ▀ weight value Sets the default weight for routes from this neighbor as...
  • Page 1638 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ network network Configures and specifies a network to announce via BGP. Product...
  • Page 1639BGP Address-Family (IPv4/IPv6) Configuration Mode Commands redistribute ▀ redistribute Redistributes routes into BGP from another protocol as BGP neighbors. Product...
  • Page 1640 BGP Address-Family (IPv4/IPv6) Configuration Mode Commands ▀ redistribute redistribute ospf route-map Map1 The following command removes the redistribution of...
  • Page 1641BGP Address-Family (IPv4/IPv6) Configuration Mode Commands timers bgp ▀ timers bgp Enables or disables an aggressive minimum BGP route advertisement...
  • Page 1642
  • Page 1643: Chapter 30 BGP Address-Family (VPNv4/VPNv6) Configuration Mode CommandsChapter 30 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (VPNv4/VPNv6) Configuration Mode is used to...
  • Page 1644 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1645BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1646 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ neighbor neighbor Configures the VPNv4 or VPNv6 address family on BGP routers...
  • Page 1647BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands neighbor ▀ Example The following command enables the exchange of routing information with the...
  • Page 1648 BGP Address-Family (VPNv4/VPNv6) Configuration Mode Commands ▀ timers bgp timers bgp Enables or disables an aggressive minimum BGP route...
  • Page 1649: Chapter 31 BGP Address-Family (VRF) Configuration Mode CommandsChapter 31 BGP Address-Family (VRF) Configuration Mode Commands The Border Gateway Protocol (BGP) Address-Family (VRF) Configuration Mode is used to...
  • Page 1650 BGP Address-Family (VRF) Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1651BGP Address-Family (VRF) Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1652 BGP Address-Family (VRF) Configuration Mode Commands ▀ neighbor neighbor Configures the Virtual Routing and Forwarding (VRF) address family for...
  • Page 1653BGP Address-Family (VRF) Configuration Mode Commands neighbor ▀ distribute-list dist_list {in | out} Filter updates to and from this neighbor...
  • Page 1654 BGP Address-Family (VRF) Configuration Mode Commands ▀ neighbor shutdown Administratively shut down this neighbor. This disables exchanging routes or...
  • Page 1655BGP Address-Family (VRF) Configuration Mode Commands neighbor ▀ neighbor 192.168.100.25 advertisement-interval 180 The following command sets the default weight for...
  • Page 1656 BGP Address-Family (VRF) Configuration Mode Commands ▀ redistribute redistribute Redistributes routes into BGP. This means that any routes from...
  • Page 1657BGP Address-Family (VRF) Configuration Mode Commands redistribute ▀ The following command redistributes OSPF routes after filtering them through the route...
  • Page 1658
  • Page 1659: Chapter 32 BGP Configuration Mode CommandsChapter 32 BGP Configuration Mode Commands The Border Gateway Protocol (BGP) Configuration Mode is used to configure properties for BGP-4...
  • Page 1660 BGP Configuration Mode Commands ▀ accept-zero-as-rd accept-zero-as-rd Configures to accept VPN prefixes with Router Distinguisher(RD) value having Administrator Subfield,...
  • Page 1661BGP Configuration Mode Commands address-family ipv4 ▀ address-family ipv4 Enters the IPv4 Address Family configuration mode. Optionally, it also enables...
  • Page 1662 BGP Configuration Mode Commands ▀ address-family ipv4 Example Use the following command to enter the IPv4 BGP Address-Family configuration...
  • Page 1663BGP Configuration Mode Commands address-family ipv6 ▀ address-family ipv6 Enters the IPv6 Address Family configuration mode. Optionally, it also enables...
  • Page 1664 BGP Configuration Mode Commands ▀ address-family vpnv4 address-family vpnv4 Enters the IPv4 VPN Address Family configuraiton mode. Product All...
  • Page 1665BGP Configuration Mode Commands address-family vpnv6 ▀ address-family vpnv6 Enters the IPv6 VPN Address Family configuraiton mode. Product All Privilege...
  • Page 1666 BGP Configuration Mode Commands ▀ bgp bgp Defines the BGP-specific parameters regarding graceful restarts. Product All Privilege Security Administrator,...
  • Page 1667BGP Configuration Mode Commands description ▀ description Allows you to enter descriptive text for this configuration. Product All Privilege Security...
  • Page 1668 BGP Configuration Mode Commands ▀ distance distance Defines the administrative distance for routes. The administrative distance is the default...
  • Page 1669BGP Configuration Mode Commands distance ▀ Usage Use this command to set the administrative distance for specific routes to values...
  • Page 1670 BGP Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1671BGP Configuration Mode Commands enforce-first-as ▀ enforce-first-as Enforces the first Autonomous System (AS) for Exterior Border Gateway Protocol (eBGP) routes....
  • Page 1672 BGP Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1673BGP Configuration Mode Commands ip vrf ▀ ip vrf Adds a preconfigured IP VRF context instance to the BGP ASN...
  • Page 1674 BGP Configuration Mode Commands ▀ maximum-paths maximum-paths Enables forwarding packets over multiple paths and specifies the maximum number of...
  • Page 1675BGP Configuration Mode Commands neighbor ▀ neighbor Configures BGP routers that interconnect to non-broadcast networks. Note that a remote AS...
  • Page 1676 BGP Configuration Mode Commands ▀ neighbor route-map map_name: Specifies the route-map that contains the criteria to originate default routes....
  • Page 1677BGP Configuration Mode Commands neighbor ▀ next-hop-self Disables the next hop calculation for this neighbor. password password Specifies a password...
  • Page 1678 BGP Configuration Mode Commands ▀ neighbor update-source ip_address Binds the specified IP address to the BGP socket that is...
  • Page 1679BGP Configuration Mode Commands network ▀ network Specifies a network to announce via BGP. Product All Privilege Security Administrator, Administrator...
  • Page 1680 BGP Configuration Mode Commands ▀ redistribute redistribute Redistributes routes via BGP from another protocol to BGP neighbors. Product All...
  • Page 1681BGP Configuration Mode Commands redistribute ▀ The following command removes the redistribution of OSPF routes from the router’s configuration: no...
  • Page 1682 BGP Configuration Mode Commands ▀ router-id router-id Overrides the configured router identifier and causes BGP peers to reset. Product...
  • Page 1683BGP Configuration Mode Commands scan-time ▀ scan-time Configures the BGP background scanner interval. BGP monitors the next hop of the...
  • Page 1684 BGP Configuration Mode Commands ▀ timers timers Configures BGP routing timers. Product All Privilege Security Administrator, Administrator Mode Exec...
  • Page 1685: Chapter 33 BGP IP VRF Configuration Mode CommandsChapter 33 BGP IP VRF Configuration Mode Commands The Border Gateway Protocol (BGP) IP VRF (Virtual Routing and Forwarding) Configuration...
  • Page 1686 BGP IP VRF Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1687BGP IP VRF Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1688 BGP IP VRF Configuration Mode Commands ▀ route-distinguisher route-distinguisher Assigns a route distinguisher (RD) for the VRF that helps...
  • Page 1689BGP IP VRF Configuration Mode Commands route-target ▀ route-target Adds an export and/or import list of extended route target communities...
  • Page 1690 BGP IP VRF Configuration Mode Commands ▀ route-target Usage Use this command to create the list of export and/or...
  • Page 1691: Chapter 34 BITS Port Configuration Mode CommandsChapter 34 BITS Port Configuration Mode Commands The Building Integrated Timing Supply (BITS) port configuration mode allows you to configure...
  • Page 1692 BITS Port Configuration Mode Commands ▀ default default Restores the BITS port’s default speed and communication mode. Product SGSN...
  • Page 1693BITS Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the BITS port. Product...
  • Page 1694 BITS Port Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1695BITS Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1696 BITS Port Configuration Mode Commands ▀ mode mode Configures the framing mode for the port. Product SGSN Privilege Security...
  • Page 1697BITS Port Configuration Mode Commands preferred slot ▀ preferred slot Identifies which card in a chassis should assume revertive (redundancy...
  • Page 1698 BITS Port Configuration Mode Commands ▀ recover recover Configures line-timing so the SPIO recovers timing from a port on...
  • Page 1699BITS Port Configuration Mode Commands recover ▀ recover line1 19 Command Line Interface Reference, StarOS Release 18 ▄ 1699
  • Page 1700 BITS Port Configuration Mode Commands ▀ shutdown shutdown Terminates all processes supporting the BITS port or blocks the shutting...
  • Page 1701BITS Port Configuration Mode Commands snmp trap link-status ▀ snmp trap link-status Enables/disables the generation and sending of an SNMP...
  • Page 1702
  • Page 1703: Chapter 35 BMSC Profile Configuration Mode CommandsChapter 35 BMSC Profile Configuration Mode Commands The BMSC Profile Configuration Mode is used to configure Broadcast Multicast Service Center...
  • Page 1704 BMSC Profile Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1705BMSC Profile Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 1706 BMSC Profile Configuration Mode Commands ▀ gmb diameter dictionary gmb diameter dictionary This command specifies the Diameter dictionary for...
  • Page 1707BMSC Profile Configuration Mode Commands gmb diameter endpoint ▀ gmb diameter endpoint This command specifies the Diameter endpoint name for...
  • Page 1708 BMSC Profile Configuration Mode Commands ▀ gmb diameter peer-select gmb diameter peer-select This command specifies the peer ids of...
  • Page 1709BMSC Profile Configuration Mode Commands gmb diameter peer-select ▀ Usage Use this command to select a BMSC Diameter peer and...
  • Page 1710 BMSC Profile Configuration Mode Commands ▀ gmb user-data gmb user-data This command configures the parameters in this BMSC profile...
  • Page 1711BMSC Profile Configuration Mode Commands gmb user-data ▀ Usage Use this command to configure user data mode and other parameters...
  • Page 1712
  • Page 1713: Chapter 36 BSSGP Cause Code Group Configuration ModeChapter 36 BSSGP Cause Code Group Configuration Mode Commands in this mode enable the operator to define multiple cause codes...
  • Page 1714 BSSGP Cause Code Group Configuration Mode ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 1715BSSGP Cause Code Group Configuration Mode exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 1716 BSSGP Cause Code Group Configuration Mode ▀ radio-cause radio-cause Enables the operator to specify one or more cause codes...
  • Page 1717BSSGP Cause Code Group Configuration Mode radio-cause ▀ Example Repeat the command with different cause values to create a group:...
  • Page 1718
  • Page 1719: Chapter 37 Bulk Statistics Configuration Mode CommandsChapter 37 Bulk Statistics Configuration Mode Commands The Bulk Statistics Configuration Mode is used to manage the options for the...
  • Page 1720 Bulk Statistics Configuration Mode Commands ▀ Overview Overview Schema Format String Syntax The following defines common syntax block options....
  • Page 1721Bulk Statistics Configuration Mode Commands aal2 schema ▀ aal2 schema Configures the ATM adaptation layer 2 (AAL2) bulk statistics schema...
  • Page 1722 Bulk Statistics Configuration Mode Commands ▀ aal2 schema The following command creates a schema named aal2stats1 that records the...
  • Page 1723Bulk Statistics Configuration Mode Commands alcap schema ▀ alcap schema Configures the Access Link Control Application Part (ALCAP) bulk statistics...
  • Page 1724 Bulk Statistics Configuration Mode Commands ▀ alcap schema The following command creates a schema named alcap1stats1 that records the...
  • Page 1725Bulk Statistics Configuration Mode Commands apn schema ▀ apn schema Configures the Access Point Name (APN) bulk statistics schema. Product...
  • Page 1726 Bulk Statistics Configuration Mode Commands ▀ apn schema apn schema apn1stats1 format “%sess-curr%” ▄ Command Line Interface Reference, StarOS...
  • Page 1727Bulk Statistics Configuration Mode Commands asngw schema ▀ asngw schema Configures Access Service Gateway (ASN-GW) bulk statistics schema. Product ASN-GW...
  • Page 1728 Bulk Statistics Configuration Mode Commands ▀ asngw schema  VPN Context Identifier: vpnid  ASN-GW Service name: servname ...
  • Page 1729Bulk Statistics Configuration Mode Commands bcmcs schema ▀ bcmcs schema Configures Broadcast and Multicast Service (BCMCS) bulk statistics schema. Product...
  • Page 1730 Bulk Statistics Configuration Mode Commands ▀ bcmcs schema bcmcs schema bcmcs1stats1 format “%sess-curr%” ▄ Command Line Interface Reference, StarOS...
  • Page 1731Bulk Statistics Configuration Mode Commands card schema ▀ card schema Configures card bulk statistics schema. These are statistics for circuit...
  • Page 1732 Bulk Statistics Configuration Mode Commands ▀ card schema Example The following command creates a schema named card1stats1 that records...
  • Page 1733Bulk Statistics Configuration Mode Commands context schema ▀ context schema Configures context bulk statistics schema. Product All Privilege Security Administrator,...
  • Page 1734 Bulk Statistics Configuration Mode Commands ▀ context schema  Total packets sent by firewall: sfw-total-txpackets  Total ICMP packets...
  • Page 1735Bulk Statistics Configuration Mode Commands cscf schema ▀ cscf schema Configures Call Session Control Function (CSCF) bulk statistics schema. Product...
  • Page 1736 Bulk Statistics Configuration Mode Commands ▀ cscf schema  Call attempts transmitted: callatttx  Call successes received: callsuccrx ...
  • Page 1737Bulk Statistics Configuration Mode Commands cs-network-ranap schema ▀ cs-network-ranap schema Configures the Radio Access Network Application Part (RANAP) bulk statistics...
  • Page 1738 Bulk Statistics Configuration Mode Commands ▀ cs-network-ranap schema The following command creates a schema named cs_ranap1stats1 that records the...
  • Page 1739Bulk Statistics Configuration Mode Commands cs-network-rtp schema ▀ cs-network-rtp schema Configures the Real-Time Transport Protocol (RTP) bulk statistics schema in...
  • Page 1740 Bulk Statistics Configuration Mode Commands ▀ cs-network-rtp schema The following command creates a schema named cs_rtp1stats1 that records the...
  • Page 1741Bulk Statistics Configuration Mode Commands cs-network-sccp schema ▀ cs-network-sccp schema Configures the Signalling Connection Control Part (SCCP) bulk statistics schema...
  • Page 1742 Bulk Statistics Configuration Mode Commands ▀ cs-network-sccp schema The following command creates a schema named cs_sccp1stats1 that records the...
  • Page 1743Bulk Statistics Configuration Mode Commands dcca schema ▀ dcca schema Configures Diameter Credit Control Application (DCCA) bulk statistics schema. This...
  • Page 1744 Bulk Statistics Configuration Mode Commands ▀ dcca-group schema dcca-group schema This command configures Diameter Credit Control Application (DCCA) group...
  • Page 1745Bulk Statistics Configuration Mode Commands default ▀ default Restores the system default for the option specified. Product All Privilege Security...
  • Page 1746 Bulk Statistics Configuration Mode Commands ▀ default default transfer-interval ▄ Command Line Interface Reference, StarOS Release 18 1746
  • Page 1747Bulk Statistics Configuration Mode Commands diameter-acct schema ▀ diameter-acct schema Configures Diameter Accounting bulk statistics schema. This command is available...
  • Page 1748 Bulk Statistics Configuration Mode Commands ▀ diameter-auth schema diameter-auth schema Configures Diameter Authentication bulk statistics schema. This command is...
  • Page 1749Bulk Statistics Configuration Mode Commands dlci-util schema ▀ dlci-util schema Configures the collection of statistics for the DLCI-Util (DLCI utilization)...
  • Page 1750 Bulk Statistics Configuration Mode Commands ▀ dlci-util schema Multiple schemas can be created to categorize DLCI-Util bulk statistics. All...
  • Page 1751Bulk Statistics Configuration Mode Commands dpca schema ▀ dpca schema Configures Diameter Policy Control Application (DPCA) bulk statistics schema. This...
  • Page 1752 Bulk Statistics Configuration Mode Commands ▀ ecs schema ecs schema Configures Enhanced Charging Service (ECS) bulk statistics schema. Product...
  • Page 1753Bulk Statistics Configuration Mode Commands egtpc schema ▀ egtpc schema Configures the enhanced GTP-C statistics schema for naming conventions of...
  • Page 1754 Bulk Statistics Configuration Mode Commands ▀ egtpc schema Usage Use this command to define schemas for enhanced GTP-C bulk...
  • Page 1755Bulk Statistics Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 1756 Bulk Statistics Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1757Bulk Statistics Configuration Mode Commands fa schema ▀ fa schema Configures Foreign Agent (FA) bulk statistics schema. Product All Privilege...
  • Page 1758 Bulk Statistics Configuration Mode Commands ▀ fa schema To create a FA-level schema named faservicestats that separates the date,...
  • Page 1759Bulk Statistics Configuration Mode Commands file ▀ file Enters the Bulk Statistics File Configuration Mode which supports the configuration of...
  • Page 1760 Bulk Statistics Configuration Mode Commands ▀ file Manager is configured as a receiver. In this case, the bulk statistics...
  • Page 1761Bulk Statistics Configuration Mode Commands fng schema ▀ fng schema Configures Femto Network Gateway (FNG) bulk statistics schema. Product FNG...
  • Page 1762 Bulk Statistics Configuration Mode Commands ▀ footer footer Configures the footer string placed at the end of the generated...
  • Page 1763Bulk Statistics Configuration Mode Commands footer ▀ Usage Define a unique footer in data files which allows for easy identification...
  • Page 1764 Bulk Statistics Configuration Mode Commands ▀ gather-on-standby gather-on-standby Controls whether or not statistics are gathered when a system is...
  • Page 1765Bulk Statistics Configuration Mode Commands gprs schema ▀ gprs schema Configures the collection of statistics for the GPRS schema. Product...
  • Page 1766 Bulk Statistics Configuration Mode Commands ▀ gprs schema Example Include the bulk statistic variable names to create a GPRS...
  • Page 1767Bulk Statistics Configuration Mode Commands gtpc schema ▀ gtpc schema Configures GPRS Tunneling Protocol-Control (GTPC) message statistics schema. Product GGSN...
  • Page 1768 Bulk Statistics Configuration Mode Commands ▀ gtpc schema create multiple GTPC schemas, re-issue the gtpc schema schema_name command using...
  • Page 1769Bulk Statistics Configuration Mode Commands gtpp schema ▀ gtpp schema Configures GPRS Tunneling Protocol-Prime (GTPP) statistics schema. Product GGSN SGSN...
  • Page 1770 Bulk Statistics Configuration Mode Commands ▀ gtpp schema Usage Use this command to define schemas for GTPP bulk statistics...
  • Page 1771Bulk Statistics Configuration Mode Commands gtpu schema ▀ gtpu schema Configures GTP-U bulk statistics schema. Product GGSN HNB-GW P-GW S-GW...
  • Page 1772 Bulk Statistics Configuration Mode Commands ▀ gtpu schema Usage Use this command to define schemas for GTP-U bulk statistics...
  • Page 1773Bulk Statistics Configuration Mode Commands ha schema ▀ ha schema Configures Home Agent (HA) bulk statistics schema. Product HA Privilege...
  • Page 1774 Bulk Statistics Configuration Mode Commands ▀ ha schema  Number of HA authentication failures: reply-haauthfail  Number of Mobile...
  • Page 1775Bulk Statistics Configuration Mode Commands header ▀ header Configures the header string placed at the beginning of the generated bulk...
  • Page 1776 Bulk Statistics Configuration Mode Commands ▀ header Usage Define a unique header in data files which allows for easy...
  • Page 1777Bulk Statistics Configuration Mode Commands hnbgw-hnbap schema ▀ hnbgw-hnbap schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1778 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap schema The following command creates a schema named hnbap1stats1 that records the...
  • Page 1779Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-closed schema ▀ hnbgw-hnbap-access-closed schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1780 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-closed schema The following command creates a schema named hnbapclosed1stats1 that records the...
  • Page 1781Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-hybrid schema ▀ hnbgw-hnbap-access-hybrid schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1782 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-hybrid schema The following command creates a schema named hnbaphyb1stats1 that records the...
  • Page 1783Bulk Statistics Configuration Mode Commands hnbgw-hnbap-access-open schema ▀ hnbgw-hnbap-access-open schema Configures bulk statistics schema for HNB-Application Part (HNB-AP) message statistics...
  • Page 1784 Bulk Statistics Configuration Mode Commands ▀ hnbgw-hnbap-access-open schema The following command creates a schema named hnbapopen1stats1 that records the...
  • Page 1785Bulk Statistics Configuration Mode Commands hnbgw-ranap schema ▀ hnbgw-ranap schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1786 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap schema The following command creates a schema named ranap1stats1 that records the...
  • Page 1787Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-closed schema ▀ hnbgw-ranap-access-closed schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1788 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-closed schema The following command creates a schema named ranapclosed1stats1 that records the...
  • Page 1789Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-hybrid schema ▀ hnbgw-ranap-access-hybrid schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1790 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-hybrid schema The following command creates a schema named ranaphyb1stats1 that records the...
  • Page 1791Bulk Statistics Configuration Mode Commands hnbgw-ranap-access-open schema ▀ hnbgw-ranap-access-open schema Configures bulk statistics schema for Radio Access Network-Application Part (RANAP)...
  • Page 1792 Bulk Statistics Configuration Mode Commands ▀ hnbgw-ranap-access-open schema The following command creates a schema named ranapopen1stats1 that records the...
  • Page 1793Bulk Statistics Configuration Mode Commands hnbgw-rtp schema ▀ hnbgw-rtp schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1794 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp schema The following command creates a schema named rtp1stats1 that records the...
  • Page 1795Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-closed schema ▀ hnbgw-rtp-access-closed schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1796 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-closed schema The following command creates a schema named rtpclosed1stats1 that records the...
  • Page 1797Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-hybrid schema ▀ hnbgw-rtp-access-hybrid schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1798 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-hybrid schema The following command creates a schema named rtphyb1stats1 that records the...
  • Page 1799Bulk Statistics Configuration Mode Commands hnbgw-rtp-access-open schema ▀ hnbgw-rtp-access-open schema Configures bulk statistics schema for Real-Time Protocol (RTP) message statistics...
  • Page 1800 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rtp-access-open schema The following command creates a schema named rtpopen1stats1 that records the...
  • Page 1801Bulk Statistics Configuration Mode Commands hnbgw-rua schema ▀ hnbgw-rua schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1802 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua schema The following command creates a schema named rua1stats1 that records the...
  • Page 1803Bulk Statistics Configuration Mode Commands hnbgw-rua-access-closed schema ▀ hnbgw-rua-access-closed schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1804 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-closed schema The following command creates a schema named ruaclosed1stats1 that records the...
  • Page 1805Bulk Statistics Configuration Mode Commands hnbgw-rua-access-hybrid schema ▀ hnbgw-rua-access-hybrid schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1806 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-hybrid schema The following command creates a schema named ruahyb1stats1 that records the...
  • Page 1807Bulk Statistics Configuration Mode Commands hnbgw-rua-access-open schema ▀ hnbgw-rua-access-open schema Configures bulk statistics schema for RANAP User Adaptation (RUA) protocol...
  • Page 1808 Bulk Statistics Configuration Mode Commands ▀ hnbgw-rua-access-open schema The following command creates a schema named ruaopen1stats1 that records the...
  • Page 1809Bulk Statistics Configuration Mode Commands hnbgw-sctp schema ▀ hnbgw-sctp schema Configures bulk statistics schema for Stream Control Transmission Protocol (SCTP)...
  • Page 1810 Bulk Statistics Configuration Mode Commands ▀ hnbgw-sctp schema The following command creates a schema named sctp1stats1 that records the...
  • Page 1811Bulk Statistics Configuration Mode Commands hsgw schema ▀ hsgw schema Configures HRPD Serving Gateway (HSGW) bulk statistics schema. Product HSGW...
  • Page 1812 Bulk Statistics Configuration Mode Commands ▀ hss schema hss schema Configures Home Subscriber Service (HSS) bulk statistics schema. Product...
  • Page 1813Bulk Statistics Configuration Mode Commands hss schema ▀ To create an hss schema named hss_stats that specifies a schema format...
  • Page 1814 Bulk Statistics Configuration Mode Commands ▀ imsa schema imsa schema Configures IP Multimedia System Authorization (IMSA) bulk statistics schema....
  • Page 1815Bulk Statistics Configuration Mode Commands imsa schema ▀ Usage Use this command to define schemas for IMSA bulk statistics collection...
  • Page 1816 Bulk Statistics Configuration Mode Commands ▀ ippool schema ippool schema Configures IP pool bulk statistics schema. Product All Privilege...
  • Page 1817Bulk Statistics Configuration Mode Commands ippool schema ▀  Number of IP addresses on hold: hold  Number of free...
  • Page 1818 Bulk Statistics Configuration Mode Commands ▀ ipsg schema ipsg schema Configures IP Services Gateway (IPSG) bulk statistics schema. Product...
  • Page 1819Bulk Statistics Configuration Mode Commands ipsg schema ▀  Service name: servname  Total responses sent: total-rsp-sent Use the following...
  • Page 1820 Bulk Statistics Configuration Mode Commands ▀ lac schema lac schema Configures LAC (L2TP Access Concentrator) bulk statistics schema. Product...
  • Page 1821Bulk Statistics Configuration Mode Commands lac schema ▀ lac schema lac1stats1 format “%sess-curactive%-%sess-maxtunnel%” To create a schema named lacresourcestats that...
  • Page 1822 Bulk Statistics Configuration Mode Commands ▀ limit limit Configures the maximum amount of system memory bulk statistics may utilize....
  • Page 1823Bulk Statistics Configuration Mode Commands lma schema ▀ lma schema Configures the Local Mobility Anchor (LMA) statistics schema for the...
  • Page 1824 Bulk Statistics Configuration Mode Commands ▀ lma schema  Binding Update Received: bindupd  Binding Update Received - Denied:...
  • Page 1825Bulk Statistics Configuration Mode Commands lns schema ▀ lns schema Configures LNS (L2TP Network Server) bulk statistics schema. Product LNS...
  • Page 1826 Bulk Statistics Configuration Mode Commands ▀ local-directory local-directory Sets the local directory for storing bulkstats collection files. Product All...
  • Page 1827Bulk Statistics Configuration Mode Commands mag schema ▀ mag schema Configures the Mobile Access Gateway (MAG) statistics schema for naming...
  • Page 1828 Bulk Statistics Configuration Mode Commands ▀ mag schema Example For a MAG-level schema named magservicestats that specifies a schema...
  • Page 1829Bulk Statistics Configuration Mode Commands mipv6ha schema ▀ mipv6ha schema Configures MIPv6 HA (home Agent) bulk statistics schema. Product HA...
  • Page 1830 Bulk Statistics Configuration Mode Commands ▀ mipv6ha schema mipv6ha schema mipv6haservicestats format “%aaa-actauthfail%” ▄ Command Line Interface Reference, StarOS...
  • Page 1831Bulk Statistics Configuration Mode Commands mme schema ▀ mme schema Configures MME (Mobility Management Entity) bulk statistics schema. Product MME...
  • Page 1832 Bulk Statistics Configuration Mode Commands ▀ mme schema mme schema mmeservice_s1ap_cfg_transfersformat “s1ap-trnsdata-cfg-tfr ▄ Command Line Interface Reference, StarOS Release...
  • Page 1833Bulk Statistics Configuration Mode Commands mvs schema ▀ mvs schema Configures MVS (Mobile Videoscape) bulk statistics schema. Product MVG Privilege...
  • Page 1834 Bulk Statistics Configuration Mode Commands ▀ nat-realm schema nat-realm schema Creates and configures Network Address Translation (NAT) realm statistics...
  • Page 1835Bulk Statistics Configuration Mode Commands p2p schema ▀ p2p schema Creates and configures P2P (Peer-to-Peer) statistics schema. Product ADC Privilege...
  • Page 1836 Bulk Statistics Configuration Mode Commands ▀ pcc-af schema pcc-af schema Configures Policy and Charging Control-Application Function (PCC-AF) service bulk...
  • Page 1837Bulk Statistics Configuration Mode Commands pcc-af schema ▀ The following command creates a schema named pcc_af1stats1 that records the total...
  • Page 1838 Bulk Statistics Configuration Mode Commands ▀ pcc-policy schema pcc-policy schema Configures Policy and Charging Control-Policy (PCC-Policy) service bulk statistics...
  • Page 1839Bulk Statistics Configuration Mode Commands pcc-policy schema ▀ The following command creates a schema named pcc_plcy1stats1 that records the total...
  • Page 1840 Bulk Statistics Configuration Mode Commands ▀ pcc-profile schema pcc-profile schema Configures Policy and Charging Control Profile (PCC-Profile) bulk statistics...
  • Page 1841Bulk Statistics Configuration Mode Commands pcc-profile schema ▀ The following command creates a schema named pcc_profile1stats1 that records the total...
  • Page 1842 Bulk Statistics Configuration Mode Commands ▀ pcc-sp-endpt schema pcc-sp-endpt schema Configures the bulkstats schema at the Sp interface endpoint...
  • Page 1843Bulk Statistics Configuration Mode Commands pcc-sp-endpt schema ▀ The following command creates a schema named pcc_sp1stats1 that records the total...
  • Page 1844 Bulk Statistics Configuration Mode Commands ▀ pcc-service schema pcc-service schema Configures Policy and Charging Control-Service (PCC-Service) bulk statistics schema....
  • Page 1845Bulk Statistics Configuration Mode Commands pcc-service schema ▀ pcc-service schema pcc_svc1stats1 format “%vpnname%-%vpnid%-%servname%- %total-gx-processed%-%total-gy-processed%” Command Line Interface Reference, StarOS Release...
  • Page 1846 Bulk Statistics Configuration Mode Commands ▀ pdif schema pdif schema Configures Packet Data Interworking Function (PDIF) bulk statistics schema....
  • Page 1847Bulk Statistics Configuration Mode Commands pdif schema ▀ pdif schema pdifschema1 format %sess-curactip4% Command Line Interface Reference, StarOS Release 18...
  • Page 1848 Bulk Statistics Configuration Mode Commands ▀ pgw schema pgw schema Configures Packet Data Network Gateway (P-GW) bulk statistics schema....
  • Page 1849Bulk Statistics Configuration Mode Commands port schema ▀ port schema Configures port bulk statistics schema. Product All Privilege Security Administrator,...
  • Page 1850 Bulk Statistics Configuration Mode Commands ▀ port schema Example To create a port-level schema named portstats1 that separates the...
  • Page 1851Bulk Statistics Configuration Mode Commands ppp schema ▀ ppp schema Configures Point-to-Point Protocol (PPP) bulk statistics schema. Product All Privilege...
  • Page 1852 Bulk Statistics Configuration Mode Commands ▀ ppp schema  Auth. Attempts: auth-attempt-chapAuth. Successes: auth-success-chap  PAP: (Password Authentication Protocol)...
  • Page 1853Bulk Statistics Configuration Mode Commands ps-network-gtpu schema ▀ ps-network-gtpu schema Configures the GTP-U bulk statistics schema in a Packet Switched...
  • Page 1854 Bulk Statistics Configuration Mode Commands ▀ ps-network-gtpu schema The following command creates a schema named ps_gtpu1stats1 that records the...
  • Page 1855Bulk Statistics Configuration Mode Commands ps-network-ranap schema ▀ ps-network-ranap schema Configures the Radio Access Network Application Part (RANAP) bulk statistics...
  • Page 1856 Bulk Statistics Configuration Mode Commands ▀ ps-network-ranap schema The following command creates a schema named ps_ranap1stats1 that records the...
  • Page 1857Bulk Statistics Configuration Mode Commands ps-network-sccp schema ▀ ps-network-sccp schema Configures the Signalling Connection Control Part (SCCP) bulk statistics schema...
  • Page 1858 Bulk Statistics Configuration Mode Commands ▀ ps-network-sccp schema The following command creates a schema named ps_sccp1stats1 that records the...
  • Page 1859Bulk Statistics Configuration Mode Commands radius schema ▀ radius schema Configures RADIUS bulk statistics schema. Product PDSN GGSN Privilege Security...
  • Page 1860 Bulk Statistics Configuration Mode Commands ▀ radius schema  Server: ipaddr  Authentication Requests Sent: auth-req-sent  Accounting Requests...
  • Page 1861Bulk Statistics Configuration Mode Commands radius-group schema ▀ radius-group schema Configures RADIUS group bulk statistics schema. Product PDSN GGSN Privilege...
  • Page 1862 Bulk Statistics Configuration Mode Commands ▀ radius-group schema  Server: ipaddr  Authentication Requests Sent: auth-req-sent  Accounting Requests...
  • Page 1863Bulk Statistics Configuration Mode Commands receiver ▀ receiver Configures a host system to receive bulkstats information through Trivial File Transfer...
  • Page 1864 Bulk Statistics Configuration Mode Commands ▀ receiver mechanism { { { ftp | sftp } login user_name [ encrypted...
  • Page 1865Bulk Statistics Configuration Mode Commands remotefile ▀ remotefile Configures the naming convention with support for multiple file format to multiple...
  • Page 1866 Bulk Statistics Configuration Mode Commands ▀ remotefile Variable Description Data Type sysuptime The uptime (in seconds) of the system...
  • Page 1867Bulk Statistics Configuration Mode Commands rlf schema ▀ rlf schema Configures the aggregated information for Rate Limiting Function (RLF) context...
  • Page 1868 Bulk Statistics Configuration Mode Commands ▀ rlf schema  Time: time  Number of Authentication Denials: deny-auth Use the...
  • Page 1869Bulk Statistics Configuration Mode Commands rlf-detailed schema ▀ rlf-detailed schema Configures the detailed instance level information for RLF context statistics...
  • Page 1870 Bulk Statistics Configuration Mode Commands ▀ rlf-detailed schema  Date: date  Time: time  Number of Authentication Denials:...
  • Page 1871Bulk Statistics Configuration Mode Commands rp schema ▀ rp schema Configures R-P bulk statistics schema. Product PDSN Privilege Security Administrator,...
  • Page 1872 Bulk Statistics Configuration Mode Commands ▀ rp schema  Time: time  Number of Authentication Denials: deny-auth Use the...
  • Page 1873Bulk Statistics Configuration Mode Commands saegw schema ▀ saegw schema Configures System Architecture Evolution Gateway (SAEGW) bulk statistics schema. Product...
  • Page 1874 Bulk Statistics Configuration Mode Commands ▀ sample-interval sample-interval Configures the time interval between collecting local statistics. Product All Privilege...
  • Page 1875Bulk Statistics Configuration Mode Commands sbc schema ▀ sbc schema Configures the collection of statistics for the SBc schema. Product...
  • Page 1876 Bulk Statistics Configuration Mode Commands ▀ sbc schema Include the bulk statistic variable names to create an SBc schema...
  • Page 1877Bulk Statistics Configuration Mode Commands sccp schema ▀ sccp schema Configures the collection of statistics for the SCCP schema. Product...
  • Page 1878 Bulk Statistics Configuration Mode Commands ▀ sccp schema Example Include the bulk statistic variable names to create an SCCP...
  • Page 1879Bulk Statistics Configuration Mode Commands schema ▀ schema Configures the system-level bulk statistics schema. Product All Privilege Security Administrator, Administrator...
  • Page 1880 Bulk Statistics Configuration Mode Commands ▀ schema schema systemstats1 format “%sess-cursipconn% - %sess-curmipconn%” To create a system-level schema named...
  • Page 1881Bulk Statistics Configuration Mode Commands sgs schema ▀ sgs schema Configures the collection of statistics for the SGs schema. Product...
  • Page 1882 Bulk Statistics Configuration Mode Commands ▀ sgs schema Include the bulk statistic variable names to create an SGs schema...
  • Page 1883Bulk Statistics Configuration Mode Commands sgs-vlr schema ▀ sgs-vlr schema Configures the collection of statistics for the SGs-VLR schema. Product...
  • Page 1884 Bulk Statistics Configuration Mode Commands ▀ sgs-vlr schema Include the bulk statistic variable names to create an SGs-VLR schema...
  • Page 1885Bulk Statistics Configuration Mode Commands sgsn schema ▀ sgsn schema Configures the collection of statistics for the SGSN schema. Product...
  • Page 1886 Bulk Statistics Configuration Mode Commands ▀ sgsn schema Include the bulk statistic variable names to create an SGSN schema...
  • Page 1887Bulk Statistics Configuration Mode Commands sgtp schema ▀ sgtp schema Configures the collection of the SGSN’s GTP-C and GTP-U activity...
  • Page 1888 Bulk Statistics Configuration Mode Commands ▀ sgtp schema Include the bulk statistic variable names to create an SGTP schema...
  • Page 1889Bulk Statistics Configuration Mode Commands sgw schema ▀ sgw schema Configures the collection of the S-GW activity statistics. Product S-GW...
  • Page 1890 Bulk Statistics Configuration Mode Commands ▀ sgw schema Example Include the bulk statistic variable names to create an S-GW...
  • Page 1891Bulk Statistics Configuration Mode Commands show variables ▀ show variables Displays the bulk statistics variable information based on schema names....
  • Page 1892 Bulk Statistics Configuration Mode Commands ▀ show variables  diameter-auth  dlci-util  dpca  ecs  egtpc ...
  • Page 1893Bulk Statistics Configuration Mode Commands show variables ▀  pcc-service  pcc-sp-endpt  pdg  pdif  pgw  phsgw...
  • Page 1894 Bulk Statistics Configuration Mode Commands ▀ sls schema sls schema Configures the collection of statistics for the SLs schema....
  • Page 1895Bulk Statistics Configuration Mode Commands sls schema ▀ Include the bulk statistic variable names to create an SLs schema named...
  • Page 1896 Bulk Statistics Configuration Mode Commands ▀ ss7link schema ss7link schema Configures the collection of the SS7 link activity statistics....
  • Page 1897Bulk Statistics Configuration Mode Commands ss7link schema ▀ Multiple collection schemas can be created to categorize SS7 link bulk statistics....
  • Page 1898 Bulk Statistics Configuration Mode Commands ▀ ss7rd schema ss7rd schema Configures the collection of bulk statistics for SS7 routing...
  • Page 1899Bulk Statistics Configuration Mode Commands ss7rd schema ▀ Multiple collection schemas can be created to categorize SS7 routing domain bulk...
  • Page 1900 Bulk Statistics Configuration Mode Commands ▀ tai schema tai schema Configures TAI (Tracking Area Identifier) bulk statistics schema. Product...
  • Page 1901Bulk Statistics Configuration Mode Commands tai schema ▀ Important: To enable collection of TAI schema bulk statistics, you must issue...
  • Page 1902 Bulk Statistics Configuration Mode Commands ▀ transfer-interval transfer-interval Configures the frequency of transfer of collected statistics to the receiver....
  • Page 1903Bulk Statistics Configuration Mode Commands vlan-npu schema ▀ vlan-npu schema Configures the collection of VLAN-NPU activity statistics. Important: The VLAN-NPU...
  • Page 1904 Bulk Statistics Configuration Mode Commands ▀ vlan-npu schema Multiple VLAN-NPU schemas can be created to categorize VLAN-NPU bulk statistics....
  • Page 1905: Chapter 38 Bulk Statistics File Configuration Mode CommandsChapter 38 Bulk Statistics File Configuration Mode Commands This section describes a bulk statistic “file” under which to group the...
  • Page 1906
  • Page 1907: Chapter 39 Call Control Profile Configuration ModeChapter 39 Call Control Profile Configuration Mode Call Control Profile configuration mode defines call-handling rules which can be combined with...
  • Page 1908 Call Control Profile Configuration Mode ▀ a-msisdn a-msisdn Enables the MME to advertise support for Additional Mobile Station ISDN...
  • Page 1909Call Control Profile Configuration Mode access-restriction-data ▀ access-restriction-data Enables the operator to assign a failure code to be included in...
  • Page 1910 Call Control Profile Configuration Mode ▀ access-restriction-data  8 - GPRS services and non-GPRS services not allowed  9...
  • Page 1911Call Control Profile Configuration Mode accounting context ▀ accounting context Defines the name of the accounting context and optionally associates...
  • Page 1912 Call Control Profile Configuration Mode ▀ accounting context Usage This command can be used to associate a predefined GTPP...
  • Page 1913Call Control Profile Configuration Mode accounting mode ▀ accounting mode Configures the mode to be used for accounting – GTPP...
  • Page 1914 Call Control Profile Configuration Mode ▀ accounting stop-trigger accounting stop-trigger Configures the trigger point for accounting stop CDR. Default...
  • Page 1915Call Control Profile Configuration Mode allocate-ptmsi-signature ▀ allocate-ptmsi-signature Enables or disables the allocation of a P-TMSI (Packet Temporary Mobile Subscriber...
  • Page 1916 Call Control Profile Configuration Mode ▀ apn-restriction apn-restriction Enables the APN restriction feature and configures the instruction for the...
  • Page 1917Call Control Profile Configuration Mode apn-restriction ▀ restriction is always de-activated. Therefore in the case of S4-SGSN, this CLI is...
  • Page 1918 Call Control Profile Configuration Mode ▀ associate associate Associates various MME -specific lists and databases with this call control...
  • Page 1919Call Control Profile Configuration Mode associate ▀ hss-peer-service service_name Associates a home subscriber server (HSS) peer service with this call...
  • Page 1920 Call Control Profile Configuration Mode ▀ associate associate ho-restrict-list HOrestrict1 The following command associates this SaMOG call control profile...
  • Page 1921Call Control Profile Configuration Mode attach access-type ▀ attach access-type Defines attach-related configuration parameters for this call control profile based...
  • Page 1922 Call Control Profile Configuration Mode ▀ attach access-type location-area-list instance list_id Instructs the SGSN to apply the command action...
  • Page 1923Call Control Profile Configuration Mode attach access-type ▀  101 - Message not compatible with the protocol state  111...
  • Page 1924 Call Control Profile Configuration Mode ▀ attach access-type  Use the attach allow command to re-enable restrictions after an...
  • Page 1925Call Control Profile Configuration Mode attach allow ▀ attach allow Configures the system to re-enable attaches that were previously restricted...
  • Page 1926 Call Control Profile Configuration Mode ▀ attach allow Usage Once the IMSI of an incoming call is known and...
  • Page 1927Call Control Profile Configuration Mode attach imei-query-type ▀ attach imei-query-type Defines device Attach limitations for this call control profile if...
  • Page 1928 Call Control Profile Configuration Mode ▀ attach imei-query-type Usage Configures system settings related to the UE Attach procedure for...
  • Page 1929Call Control Profile Configuration Mode attach restrict ▀ attach restrict Configures the system to restrict attaches based on access type...
  • Page 1930 Call Control Profile Configuration Mode ▀ attach restrict  tracking-area-not-allowed The default cause code is no-suitable-cell-in-tracking-area. Important: The tracking-area-not-allowed...
  • Page 1931Call Control Profile Configuration Mode attach restrict ▀ Usage Once the IMSI of an incoming call is known and matched...
  • Page 1932 Call Control Profile Configuration Mode ▀ attach restrict attach restrict access-type gprs all attach access-type grps all failure-code 22...
  • Page 1933Call Control Profile Configuration Mode authenticate all-events ▀ authenticate all-events Allows the operator to quickly define authentication procedures, based on...
  • Page 1934 Call Control Profile Configuration Mode ▀ authenticate all-events Usage By default, authentication is not performed for any subscriber events....
  • Page 1935Call Control Profile Configuration Mode authenticate attach ▀ authenticate attach Allows the operator to define authentication for Attach procedures. Product...
  • Page 1936 Call Control Profile Configuration Mode ▀ authenticate attach attach-type This keyword configures the Attach authentication based on the type...
  • Page 1937Call Control Profile Configuration Mode authenticate context ▀ authenticate context This command allows you to specify the authentication group, authentication...
  • Page 1938 Call Control Profile Configuration Mode ▀ authenticate context Usage Use this command to specify the authentication group, context, and...
  • Page 1939Call Control Profile Configuration Mode authenticate detach ▀ authenticate detach Allows the operator to enable and define authentication for Detach...
  • Page 1940 Call Control Profile Configuration Mode ▀ authenticate on-first-vector authenticate on-first-vector Allows the operator to enable the SGSN to begin...
  • Page 1941Call Control Profile Configuration Mode authenticate rau ▀ authenticate rau Enables or disables and fine tunes authentication procedures for routing...
  • Page 1942 Call Control Profile Configuration Mode ▀ authenticate rau frequency frequency Defines 1-in-N selective authentication for RAU events. If the...
  • Page 1943Call Control Profile Configuration Mode authenticate service-request ▀ authenticate service-request Enables or disables and fine-tunes authentication procedures for Service Requests....
  • Page 1944 Call Control Profile Configuration Mode ▀ authenticate service-request  signaling Usage By default, authentication is not performed for Service...
  • Page 1945Call Control Profile Configuration Mode authenticate sms ▀ authenticate sms Enables or disables and fine tunes authentication procedures for Short...
  • Page 1946 Call Control Profile Configuration Mode ▀ authenticate sms  mo-sms: mobile-originated SMS  mt-sms: mobile-terminated SMS Usage By default,...
  • Page 1947Call Control Profile Configuration Mode authenticate tau ▀ authenticate tau Allows the operator to enable/disable and fine-tune authentication for the...
  • Page 1948 Call Control Profile Configuration Mode ▀ authenticate tau The following command configures TAU authentication to occur when there is...
  • Page 1949Call Control Profile Configuration Mode cc ▀ cc Defines the charging characteristics to be applied for CDR generation when the...
  • Page 1950 Call Control Profile Configuration Mode ▀ cc index_bit is an integer value from 1 through 15. Setting the profile...
  • Page 1951Call Control Profile Configuration Mode check-zone-code ▀ check-zone-code Enables or disables the zone code checking mechanism. Product SGSN Privilege Security...
  • Page 1952 Call Control Profile Configuration Mode ▀ ciphering-algorithm-gprs ciphering-algorithm-gprs Defines the order of preference of the ciphering algorithms. Product SGSN...
  • Page 1953Call Control Profile Configuration Mode csfb ▀ csfb Configures circuit-switched fallback options. CSFB is the mechanism to move a subscriber...
  • Page 1954 Call Control Profile Configuration Mode ▀ csfb Usage Use this command to restrict the circuit-switched fallback function to SMS...
  • Page 1955Call Control Profile Configuration Mode description ▀ description Allows you to enter a relevant descriptive string. Product MME SAEGW S-GW...
  • Page 1956 Call Control Profile Configuration Mode ▀ diameter-result-code-mapping diameter-result-code-mapping Maps an EMM (EPS Mobility Management) NAS (Network Access Server) cause...
  • Page 1957Call Control Profile Configuration Mode diameter-result-code-mapping ▀  diameter-unsupported-feature - s6a result code 5011. Default mapped EMM code: “Network failure.”...
  • Page 1958 Call Control Profile Configuration Mode ▀ direct-tunnel direct-tunnel Allows direct tunneling if direct tunneling is supported by the destination...
  • Page 1959Call Control Profile Configuration Mode dns-ggsn ▀ dns-ggsn Defines the context to be used to do DNS lookup for GGSNs....
  • Page 1960 Call Control Profile Configuration Mode ▀ dns-mrme dns-mrme This command is used to configure the DNS client context and...
  • Page 1961Call Control Profile Configuration Mode dns-mrme ▀ Important: This keyword is available only when the SaMOG Mixed Mode license (supporting...
  • Page 1962 Call Control Profile Configuration Mode ▀ dns-msc dns-msc Defines the context to be used to do DNS lookup for...
  • Page 1963Call Control Profile Configuration Mode dns-sgsn ▀ dns-sgsn Identifies the context to be used to do DNS to find an...
  • Page 1964 Call Control Profile Configuration Mode ▀ dns-pgw dns-pgw Defines the context to be used to do DNS lookup for...
  • Page 1965Call Control Profile Configuration Mode dns-sgw ▀ dns-sgw Defines the context to be used to do DNS lookup for S-GWs....
  • Page 1966 Call Control Profile Configuration Mode ▀ egtp egtp Configures the type of PLMN sent in either the user location...
  • Page 1967Call Control Profile Configuration Mode eir-profile ▀ eir-profile Identifies and associates an EIR profile to be used by the SGSN...
  • Page 1968 Call Control Profile Configuration Mode ▀ encryption-algorithm-lte encryption-algorithm-lte Defines the priorities for using the encryption algorithms. Product MME Privilege...
  • Page 1969Call Control Profile Configuration Mode encryption-algorithm-umts ▀ encryption-algorithm-umts Defines the priorities for using the encryption algorithms. Product SGSN Privilege Security...
  • Page 1970 Call Control Profile Configuration Mode ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 1971Call Control Profile Configuration Mode epdg-s2b-gtpv2 ▀ epdg-s2b-gtpv2 Configures S2b GTPv2 IE Options. Product ePDG Privilege Security Administrator, Administrator Mode...
  • Page 1972 Call Control Profile Configuration Mode ▀ equivalent-plmn equivalent-plmn Configures the definition for an equivalent public land mobile network identifier...
  • Page 1973Call Control Profile Configuration Mode equivalent-plmn ▀ Usage Use the command to identify an ‘equivalent PLMN’ and assign it a...
  • Page 1974 Call Control Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 1975Call Control Profile Configuration Mode gmm Extended-T3312-timeout ▀ gmm Extended-T3312-timeout This command enables the operator to determine how the SGSN...
  • Page 1976 Call Control Profile Configuration Mode ▀ gmm Extended-T3312-timeout Usage An Extended-T3312-timeout configuration in the Call-Control Profile will override an...
  • Page 1977Call Control Profile Configuration Mode gmm information-in-messages ▀ gmm information-in-messages Provides the configuration to include the information in messages for...
  • Page 1978 Call Control Profile Configuration Mode ▀ gmm information-in-messages send-after{ attach | rau } This keyword configures the information in...
  • Page 1979Call Control Profile Configuration Mode gmm rau-accept ▀ gmm rau-accept Provides the configuration to set the Follow-On Proceed (FOP) bit...
  • Page 1980 Call Control Profile Configuration Mode ▀ gmm retrieve-equipment-identity gmm retrieve-equipment-identity Configures the International Mobile Equipment Identity (IMEI) or software...
  • Page 1981Call Control Profile Configuration Mode gmm retrieve-equipment-identity ▀ imeisv [ unciphered ] [ then-imei ] Indicates the equipment identity retrieval...
  • Page 1982 Call Control Profile Configuration Mode ▀ gmm t3346 gmm t3346 The gmm command includes a new keyword to set...
  • Page 1983Call Control Profile Configuration Mode gmm t3346 ▀ gmm t3346 min 2 max 15 Command Line Interface Reference, StarOS Release...
  • Page 1984 Call Control Profile Configuration Mode ▀ gs-service gs-service Associates the context of a Gs service interface with this call...
  • Page 1985Call Control Profile Configuration Mode gtp send ▀ gtp send Configures which information elements (IE) the SGSN sends in GTP...
  • Page 1986 Call Control Profile Configuration Mode ▀ gtp send ms-timezone Instructs the SGSN to include this IE in GTP messages...
  • Page 1987Call Control Profile Configuration Mode gtp send ▀ use-ue-plmn This keyword selects Selected PLMN for supporting UE and Common PLMN...
  • Page 1988 Call Control Profile Configuration Mode ▀ gtpp gtpp Enables secondary GTPP accounting for an S-GW call control profile. By...
  • Page 1989Call Control Profile Configuration Mode gtpu fast-path ▀ gtpu fast-path Enables or disables the network processing unit (NPU) Fast Path...
  • Page 1990 Call Control Profile Configuration Mode ▀ gw-selection gw-selection Configures the parameters controlling the gateway selection process. Product MME SGSN...
  • Page 1991Call Control Profile Configuration Mode gw-selection ▀ Usage Use this command to define the criteria for gateway selection. Selection of...
  • Page 1992 Call Control Profile Configuration Mode ▀ hss hss This command defines the HSS message specific configurations. Using this command...
  • Page 1993Call Control Profile Configuration Mode hss ▀ Usage This command provides operator control over GPRS Subscription Data Requests in ULR...
  • Page 1994 Call Control Profile Configuration Mode ▀ ignore-ul-data-status ignore-ul-data-status This command is used to enable or disable processing of Uplink...
  • Page 1995Call Control Profile Configuration Mode idle-mode-signaling-reduction ▀ idle-mode-signaling-reduction Enables or disables the Idle-Mode-Signaling-Reduction (ISR) feature on the S4-SGSN. Product SGSN...
  • Page 1996 Call Control Profile Configuration Mode ▀ integrity-algorithm-lte integrity-algorithm-lte Specifies the order of preference for using an Integrity Algorithm. Product...
  • Page 1997Call Control Profile Configuration Mode integrity-algorithm-umts ▀ integrity-algorithm-umts Configures the order of preference for the Integrity Algorithm used for 3G....
  • Page 1998 Call Control Profile Configuration Mode ▀ lcs-mo lcs-mo This command enables/disables mobile-originating Location Requests by access-type when Location Services...
  • Page 1999Call Control Profile Configuration Mode lcs-mt ▀ lcs-mt This command enables/disables mobile-terminating Location Requests by access-type when Location Services functionality...
  • Page 2000 Call Control Profile Configuration Mode ▀ lcs-ni lcs-ni This command enables/disables network-initiated Location Requests by access-type when Location Services...
  • Page 2001Call Control Profile Configuration Mode local-cause-code-mapping apn-mismatch ▀ local-cause-code-mapping apn-mismatch Configures the reject cause code to send to a UE...
  • Page 2002 Call Control Profile Configuration Mode ▀ local-cause-code-mapping apn-mismatch Related Commands: If a condition is specified in both the call-control-profile...
  • Page 2003Call Control Profile Configuration Mode local-cause-code-mapping apn-not-subscribed ▀ local-cause-code-mapping apn-not-subscribed Gives the operator the option to specify the local cause-code...
  • Page 2004 Call Control Profile Configuration Mode ▀ local-cause-code-mapping auth-failure local-cause-code-mapping auth-failure Configures the reject cause code to send to a...
  • Page 2005Call Control Profile Configuration Mode local-cause-code-mapping auth-failure ▀  The UE responds to any identity request with a different type...
  • Page 2006 Call Control Profile Configuration Mode ▀ local-cause-code-mapping congestion local-cause-code-mapping congestion Configures the reject cause code to send to a...
  • Page 2007Call Control Profile Configuration Mode local-cause-code-mapping congestion ▀ esm-cause-code { congestion | insufficient-resources | service-option- temporarily-out-of-order } Specifies the EPS...
  • Page 2008 Call Control Profile Configuration Mode ▀ local-cause-code-mapping ctxt-xfer-fail-mme local-cause-code-mapping ctxt-xfer-fail-mme Configures the reject cause code to send to a...
  • Page 2009Call Control Profile Configuration Mode local-cause-code-mapping ctxt-xfer-fail-mme ▀ Related Commands: If a cause code mapping is specified in both the...
  • Page 2010 Call Control Profile Configuration Mode ▀ local-cause-code-mapping ctxt-xfer-fail-sgsn local-cause-code-mapping ctxt-xfer-fail-sgsn Configures the reject cause code to send to a...
  • Page 2011Call Control Profile Configuration Mode local-cause-code-mapping ctxt-xfer-fail-sgsn ▀ Related Commands: If a cause code mapping is specified in both the...
  • Page 2012 Call Control Profile Configuration Mode ▀ local-cause-code-mapping gw-unreachable local-cause-code-mapping gw-unreachable Configures the reject cause code to send to a...
  • Page 2013Call Control Profile Configuration Mode local-cause-code-mapping gw-unreachable ▀ Usage Use this command to configure the cause code returned to a...
  • Page 2014 Call Control Profile Configuration Mode ▀ local-cause-code-mapping hss-unavailable local-cause-code-mapping hss-unavailable Configures the reject cause code to send to a...
  • Page 2015Call Control Profile Configuration Mode local-cause-code-mapping hss-unavailable ▀ The cause code configured for this condition will be signaled in TAU...
  • Page 2016 Call Control Profile Configuration Mode ▀ local-cause-code-mapping map-cause-code local-cause-code-mapping map-cause-code Configures the operator-preferred GMM reject cause code to send...
  • Page 2017Call Control Profile Configuration Mode local-cause-code-mapping map-cause-code ▀ gmm-cause-code gmm-cause Specifies the GPRS mobility management (GMM) cause code to return...
  • Page 2018 Call Control Profile Configuration Mode ▀ local-cause-code-mapping no-active-bearers local-cause-code-mapping no-active-bearers Configures the reject cause code to send to a...
  • Page 2019Call Control Profile Configuration Mode local-cause-code-mapping no-active-bearers ▀ Usage Use this command to configure the cause code returned to a...
  • Page 2020 Call Control Profile Configuration Mode ▀ local-cause-code-mapping path-failure local-cause-code-mapping path-failure Configures SM cause codes for SGSN to send in...
  • Page 2021Call Control Profile Configuration Mode local-cause-code-mapping peer-node-unknown ▀ local-cause-code-mapping peer-node-unknown Configures the reject cause code to send to a UE...
  • Page 2022 Call Control Profile Configuration Mode ▀ local-cause-code-mapping peer-node-unknown or based on local configuration. This condition occurs when all mechanisms...
  • Page 2023Call Control Profile Configuration Mode local-cause-code-mapping pgw-selection-failure ▀ local-cause-code-mapping pgw-selection-failure Configures the reject cause code to send to a UE...
  • Page 2024 Call Control Profile Configuration Mode ▀ local-cause-code-mapping pgw-selection-failure Related Commands: If a cause code mapping is specified in both...
  • Page 2025Call Control Profile Configuration Mode local-cause-code-mapping restricted-zone-code ▀ local-cause-code-mapping restricted-zone-code Configures the reject cause code to send to a UE...
  • Page 2026 Call Control Profile Configuration Mode ▀ local-cause-code-mapping restricted-zone-code command in the mme-service configuration mode. This command is described in...
  • Page 2027Call Control Profile Configuration Mode local-cause-code-mapping sgw-selection-failure ▀ local-cause-code-mapping sgw-selection-failure Configures the reject cause code to send to a UE...
  • Page 2028 Call Control Profile Configuration Mode ▀ local-cause-code-mapping sgw-selection-failure Related Commands: If a cause code mapping is specified in both...
  • Page 2029Call Control Profile Configuration Mode local-cause-code-mapping vlr-down ▀ local-cause-code-mapping vlr-down Configures the cause code to send in a ATTACH ACCEPT...
  • Page 2030 Call Control Profile Configuration Mode ▀ local-cause-code-mapping vlr-down command in the mme-service configuration mode. This command is described in...
  • Page 2031Call Control Profile Configuration Mode local-cause-code-mapping vlr-unreachable ▀ local-cause-code-mapping vlr-unreachable Configures the cause code to send in a ATTACH ACCEPT...
  • Page 2032 Call Control Profile Configuration Mode ▀ local-cause-code-mapping vlr-unreachable command in the mme-service configuration mode. This command is described in...
  • Page 2033Call Control Profile Configuration Mode location-area-list ▀ location-area-list Defines the location area list to allow or restrict services in the...
  • Page 2034 Call Control Profile Configuration Mode ▀ location-area-list The next command corrects an area code mistake (327 not 32) made...
  • Page 2035Call Control Profile Configuration Mode location-reporting ▀ location-reporting Enable 3G/2G Location Change Reporting feature on the SGSN. Product SGSN Privilege...
  • Page 2036 Call Control Profile Configuration Mode ▀ lte-zone-code lte-zone-code Configures the enforcement of allowed or restricted zone code lists and...
  • Page 2037Call Control Profile Configuration Mode lte-zone-code ▀ Usage Use this command to create zone code lists that allow or restrict...
  • Page 2038 Call Control Profile Configuration Mode ▀ map map Configures the optional extensions to Mobile Application Part (MAP) messages.Using this...
  • Page 2039Call Control Profile Configuration Mode map ▀ eps-subscription-not-needed The operator can use this keyword to control the request for EPS...
  • Page 2040 Call Control Profile Configuration Mode ▀ map-service map-service Identifies a Mobile Application Part (MAP) service and the context which...
  • Page 2041Call Control Profile Configuration Mode max-bearers-per-subscriber ▀ max-bearers-per-subscriber Defines the maximum number of bearers allowed per subscriber. Product MME Privilege...
  • Page 2042 Call Control Profile Configuration Mode ▀ max-pdns-per-subscriber max-pdns-per-subscriber Defines the maximum number of PDNs allowed per subscriber. Product MME...
  • Page 2043Call Control Profile Configuration Mode min-unused-auth-vectors ▀ min-unused-auth-vectors Configures a specific minimum number of unused vectors to be maintained by...
  • Page 2044 Call Control Profile Configuration Mode ▀ mobility-protocol mobility-protocol This command allows you to configure the default mobility protocol type...
  • Page 2045Call Control Profile Configuration Mode network-feature-support-ie ▀ network-feature-support-ie Configures support for the IMS Voice over Packet-Switched indication and Homogenous Support...
  • Page 2046 Call Control Profile Configuration Mode ▀ network-initiated-pdp-activation network-initiated-pdp-activation Configures the call control profile to perform two functions: (1) to...
  • Page 2047Call Control Profile Configuration Mode network-initiated-pdp-activation ▀ Important: The secondary keyword is visible and can be selected. However, NRSPCA functionality...
  • Page 2048 Call Control Profile Configuration Mode ▀ network-initiated-pdp-activation  213 - Relocation failure  214 - Unknown mandatory extension header...
  • Page 2049Call Control Profile Configuration Mode network-initiated-pdp-activation ▀ network-initiated-pdp-activation restrict primary access-type umts location-area-list instance 2 Command Line Interface Reference, StarOS...
  • Page 2050 Call Control Profile Configuration Mode ▀ override-arp-with-ggsn-arp override-arp-with-ggsn-arp Enables or disables the ability of the SGSN to override an...
  • Page 2051Call Control Profile Configuration Mode pdp-activate access-type ▀ pdp-activate access-type Configures the PDP context activation option based the type of...
  • Page 2052 Call Control Profile Configuration Mode ▀ pdp-activate access-type Example The following command configures the system to create the PDP...
  • Page 2053Call Control Profile Configuration Mode pdp-activate allow ▀ pdp-activate allow Configures the system to allow the PDP context activation based...
  • Page 2054 Call Control Profile Configuration Mode ▀ pdp-activate restrict pdp-activate restrict Configures the system to restrict the PDP context activation...
  • Page 2055Call Control Profile Configuration Mode pdp-activate restrict ▀ secondary-activation Restricts the SGSN, based on the access-type, so that secondary PDP...
  • Page 2056 Call Control Profile Configuration Mode ▀ pdn-type-override pdn-type-override Configures the MME or the SGSN to override the requested packet...
  • Page 2057Call Control Profile Configuration Mode pdn-type-override ▀ Example The following command configures the system to override the requested PDN type...
  • Page 2058 Call Control Profile Configuration Mode ▀ peer-mme peer-mme Configures a peer MME address. S4-SGSN operators can use this command...
  • Page 2059Call Control Profile Configuration Mode peer-mme ▀ prefer { fallback-for-dns | local } Indicates whether to use a DNS query...
  • Page 2060 Call Control Profile Configuration Mode ▀ peer-msc peer-msc Enables/disables weight-based selection of a peer MSC during MSC lookup. By...
  • Page 2061Call Control Profile Configuration Mode peer-nri-length ▀ peer-nri-length Enables the SGSN to use NRI-FQDN-based DNS resolution for non-local RAIs when...
  • Page 2062 Call Control Profile Configuration Mode ▀ peer-nri-length This functionality is applicable in situations for either inter- or intra-PLMN when...
  • Page 2063Call Control Profile Configuration Mode plmn-protocol ▀ plmn-protocol Configures the protocol supported by the PLMN (Public Land Mobile Network). Product...
  • Page 2064 Call Control Profile Configuration Mode ▀ prefer subscription-interface prefer subscription-interface Selects the specified subscription interface (Gr or S6d) if...
  • Page 2065Call Control Profile Configuration Mode prefer subscription-interface ▀ prefer subscription-interface hss Command Line Interface Reference, StarOS Release 18 ▄ 2065...
  • Page 2066 Call Control Profile Configuration Mode ▀ ptmsi-reallocate ptmsi-reallocate Defines P-TMSI reallocation for Attach Requests, RAU Request, and Service Requests....
  • Page 2067Call Control Profile Configuration Mode ptmsi-reallocate ▀ access-type type One of the following must be selected to reallocate on the...
  • Page 2068 Call Control Profile Configuration Mode ▀ ptmsi-reallocate ptmsi-reallocate attach access-type gprs The following command configures the SGSN to disable...
  • Page 2069Call Control Profile Configuration Mode ptmsi-signature-reallocate ▀ ptmsi-signature-reallocate Enables P-TMSI signature reallocation during Attach/RAU procedures. Product SGSN Privilege Security Administrator,...
  • Page 2070 Call Control Profile Configuration Mode ▀ ptmsi-signature-reallocate frequency frequency Defines 1-in-N selective reallocation. If the frequency is set for...
  • Page 2071Call Control Profile Configuration Mode qos ▀ qos Configures the quality of service (QoS) parameters to be applied. Product MME...
  • Page 2072 Call Control Profile Configuration Mode ▀ qos pre-emption Defines the pre-emption/vulnerability criteria for PDP Contexts imported from SGSN on...
  • Page 2073Call Control Profile Configuration Mode qos ▀  no-suitable-cell-in-tracking-area  plmn-not-allowed  roaming-not-allowed-in-this-tracking-area  tracking-area-not-allowed prefer-as-cap { both-hss-and-local minimum |...
  • Page 2074 Call Control Profile Configuration Mode ▀ rau-inter rau-inter Defines acceptable parameters for inter-SGSN routing area updates. Product SGSN Privilege...
  • Page 2075Call Control Profile Configuration Mode rau-inter ▀ allow access-type Including this keyword with one of the following options, configures the...
  • Page 2076 Call Control Profile Configuration Mode ▀ rau-inter location-area-list instance instance list_id must be an integer between 1 and 5....
  • Page 2077Call Control Profile Configuration Mode rau-inter ▀ user-device-release { before-r99 | r99-or-later } failure-code code Default: Disabled Enables the SGSN...
  • Page 2078 Call Control Profile Configuration Mode ▀ rau-inter-plmn rau-inter-plmn Enables or disables restriction of all Routing Area Updates (RAUs) occurring...
  • Page 2079Call Control Profile Configuration Mode rau-inter-plmn ▀ restrict access-type Including this keyword-set with one of the following options, configures the...
  • Page 2080 Call Control Profile Configuration Mode ▀ rau-inter-plmn  97 - Message type non-existent or not implemented  98 -...
  • Page 2081Call Control Profile Configuration Mode rau-intra ▀ rau-intra Defines an acceptable procedure for intra-SGSN Routing Area Updates (RAUs). Product SGSN...
  • Page 2082 Call Control Profile Configuration Mode ▀ rau-intra restrict access-type Including this keyword-set with one of the following options, configures...
  • Page 2083Call Control Profile Configuration Mode rau-intra ▀  97 - Message type non-existent or not implemented  98 - Message...
  • Page 2084 Call Control Profile Configuration Mode ▀ re-authenticate re-authenticate Enables or disables the re-authentication feature. This command is available in...
  • Page 2085Call Control Profile Configuration Mode regional-subscription-restriction ▀ regional-subscription-restriction Allows the operator to define the cause code for subscriber rejection when...
  • Page 2086 Call Control Profile Configuration Mode ▀ regional-subscription-restriction  20 - MAC failure  21 - Synch failure  22...
  • Page 2087Call Control Profile Configuration Mode release-access-bearer ▀ release-access-bearer Enables sending of Release Access Bearer and configures the S4-SGSN to send...
  • Page 2088 Call Control Profile Configuration Mode ▀ release-access-bearer or/and remove release-access-bearer on-ready-to-standby will display in the output generated by the...
  • Page 2089Call Control Profile Configuration Mode reuse-authentication-triplets ▀ reuse-authentication-triplets Creates a configuration entry to enable or disable the reuse of authentication...
  • Page 2090 Call Control Profile Configuration Mode ▀ rfsp-override rfsp-override Configures RAT frequency selection priority override parameters for this call control...
  • Page 2091Call Control Profile Configuration Mode rfsp-override ▀ Example The following command resets the specified RFSP Index value (1) to its...
  • Page 2092 Call Control Profile Configuration Mode ▀ rfsp-override ue-settings rfsp-override ue-settings Configures the override of the RAT Frequency Selection Priority...
  • Page 2093Call Control Profile Configuration Mode rfsp-override ue-settings ▀ new-val value Assign a new RFSP Index value. value: Enter an integer...
  • Page 2094 Call Control Profile Configuration Mode ▀ s1-reset s1-reset Configures the behavior of user equipment (UE) on S1-reset. Product MME...
  • Page 2095Call Control Profile Configuration Mode samog-gtpv1 ▀ samog-gtpv1 Enables SaMOG to forward the User Equipment's (UE) Identity and/or the Access...
  • Page 2096 Call Control Profile Configuration Mode ▀ samog-s2a-gtpv2 samog-s2a-gtpv2 Enables SaMOG to forward the User Equipment's (UE) Identity information over...
  • Page 2097Call Control Profile Configuration Mode sctp-down ▀ sctp-down Configures the behavior towards UE (user equipment) when Stream Control Transmission Protocol...
  • Page 2098 Call Control Profile Configuration Mode ▀ sgs-cause-code-mapping sgs-cause-code-mapping Configures the EMM reject cause code to send to a UE...
  • Page 2099Call Control Profile Configuration Mode sgs-cause-code-mapping ▀  service-out-of-order - Default mapped EMM cause code: #16 MSC temporarily unreachable. emm-cause-code...
  • Page 2100 Call Control Profile Configuration Mode ▀ sgsn-address sgsn-address Defines the IP addresses for peer SGSNs in a static SGSN...
  • Page 2101Call Control Profile Configuration Mode sgsn-address ▀ Important: Typically, use of this keyword is optional. However, it must be included...
  • Page 2102 Call Control Profile Configuration Mode ▀ sgsn-address  With the peer-SGSN address configured using this sgsn-address command, the peer-SGSN-RAI’s...
  • Page 2103Call Control Profile Configuration Mode sgsn-core-nw-interface ▀ sgsn-core-nw-interface This command enables operators to select the Gn interface or the S4...
  • Page 2104 Call Control Profile Configuration Mode ▀ sgsn-core-nw-interface Example sgsn-core-nw-interface gn ▄ Command Line Interface Reference, StarOS Release 18 2104...
  • Page 2105Call Control Profile Configuration Mode sgsn-number ▀ sgsn-number Defines the SGSN’s E.164 number to be used for interactions via the...
  • Page 2106 Call Control Profile Configuration Mode ▀ sgtp-service sgtp-service Identifies the SGTP service configuration to be used according to this...
  • Page 2107Call Control Profile Configuration Mode sms-mo ▀ sms-mo Configures how mobile-originated (MO) short message service (SMS) messages are handled. Product...
  • Page 2108 Call Control Profile Configuration Mode ▀ sms-mo sms-mo access-type gprs all-location-areas failure-code 100 ▄ Command Line Interface Reference, StarOS...
  • Page 2109Call Control Profile Configuration Mode sms-mt ▀ sms-mt This command configures how mobile-terminated (MT) short message service (SMS) messages are...
  • Page 2110 Call Control Profile Configuration Mode ▀ sms-mt sms-mt access-type gprs all-location-areas failure-code 100 ▄ Command Line Interface Reference, StarOS...
  • Page 2111Call Control Profile Configuration Mode srns-inter ▀ srns-inter Defines handling parameters for Inter-SRNS (Serving Radio Network Subsystem) relocation. Product SGSN...
  • Page 2112 Call Control Profile Configuration Mode ▀ srns-inter Usage This command defines the operational parameters for inter-SRNS relocation. Example The...
  • Page 2113Call Control Profile Configuration Mode srns-intra ▀ srns-intra Defines handling parameters for intra-SRNS (Serving Radio Network Subsystem) relocation. Product SGSN...
  • Page 2114 Call Control Profile Configuration Mode ▀ srns-intra Usage This command defines the operational parameters for intra-SRNS relocation. Example The...
  • Page 2115Call Control Profile Configuration Mode srvcc exclude-stnsr-nanpi ▀ srvcc exclude-stnsr-nanpi Configures the MME to not include the Nature of Address...
  • Page 2116 Call Control Profile Configuration Mode ▀ subscriber multi-device subscriber multi-device Enable or disable the operator policy from allowing multiple...
  • Page 2117Call Control Profile Configuration Mode subscriber-control-inactivity ▀ subscriber-control-inactivity Configures \the subscriber-control inactivity timer. The system detects inactivity when no PDP...
  • Page 2118 Call Control Profile Configuration Mode ▀ subscriber-control-inactivity  reattach-time-period period[ action ] - Specify the number of seconds the...
  • Page 2119Call Control Profile Configuration Mode super-charger ▀ super-charger Enables or disables the SGSN to work with a super-charged network. Product...
  • Page 2120 Call Control Profile Configuration Mode ▀ tau tau Configure parameters for the tracking area update (TAU) procedure. Product MME...
  • Page 2121Call Control Profile Configuration Mode tau ▀ inter-rat security-ctxt { allow-mapped | native } Configure inter-RAT parameters for TAU. This...
  • Page 2122 Call Control Profile Configuration Mode ▀ tcp-maximum-segment-size tcp-maximum-segment-size This command enables the operator to define a maximum segment size...
  • Page 2123Call Control Profile Configuration Mode timeout ▀ timeout Configure the duration after which the cached MAC to IMSI mapping entry...
  • Page 2124 Call Control Profile Configuration Mode ▀ treat-as-hplmn treat-as-hplmn Enables or disables the SGSN to treat an IMSI series as...
  • Page 2125Call Control Profile Configuration Mode vplmn-address ▀ vplmn-address Enables/disables the SGSN to override the VPLMN address-allowed flag. Product SGSN Privilege...
  • Page 2126 Call Control Profile Configuration Mode ▀ vplmn-address vplmn-address not-allowed The following command instructs the SGSN not to override standard...
  • Page 2127Call Control Profile Configuration Mode zone-code ▀ zone-code Configures a zone code listing of one or more location area code...
  • Page 2128 Call Control Profile Configuration Mode ▀ zone-code the addressed SGSN. It contains the complete list (up to 10 zone...
  • Page 2129: Chapter 40 Call-Home Configuration ModeChapter 40 Call-Home Configuration Mode The Call-Home Configuration Mode sets parameters for the Smart Call Home feature. Smart Call Home...
  • Page 2130 Call-Home Configuration Mode ▀ activate activate Activates the Cisco Smart Call Home service. Product All Privilege Security Administrator, Administrator...
  • Page 2131Call-Home Configuration Mode alert-group ▀ alert-group Enables or disables the Smart Call Home alert-group. Product All Privilege Security Administrator, Administrator...
  • Page 2132 Call-Home Configuration Mode ▀ alert-group alert-group syslog Enables an alert group related to syslog. This includes events generated by...
  • Page 2133Call-Home Configuration Mode contact-email-addr ▀ contact-email-addr Sets the e-mail address of the person identified as the prime contact for this...
  • Page 2134 Call-Home Configuration Mode ▀ contract-id contract-id Configures the system’s contract-identifier for Cisco AutoNotify. Product All Privilege Security Administrator, Administrator...
  • Page 2135Call-Home Configuration Mode customer-id ▀ customer-id Configures the system’s customer-identifier for Cisco AutoNotify. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2136 Call-Home Configuration Mode ▀ end end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 2137Call-Home Configuration Mode exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All Privilege...
  • Page 2138 Call-Home Configuration Mode ▀ mail-server mail-server Configures the Smart Call Home mail-server. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2139Call-Home Configuration Mode phone-number ▀ phone-number Enables or disables the phone-number for the Smart Call Home contact person. Product All...
  • Page 2140 Call-Home Configuration Mode ▀ profile profile Creates the Smart Call Home profile. Product All Privilege Security Administrator, Administrator Mode...
  • Page 2141Call-Home Configuration Mode rate-limit ▀ rate-limit Enables or disables the message rate-limit for Smart Call Home features. Product All Privilege...
  • Page 2142 Call-Home Configuration Mode ▀ sender sender Specifies the Smart Call Home e-mail settings for the “from” address and “reply-to”...
  • Page 2143Call-Home Configuration Mode site-id ▀ site-id Specifies the Smart Call Home site identifier for this system. Product All Privilege Security...
  • Page 2144 Call-Home Configuration Mode ▀ street-address street-address Specifies the Smart Call Home street address for the system. Product All Privilege...
  • Page 2145: Chapter 41 Call-Home Profile Configuration ModeChapter 41 Call-Home Profile Configuration Mode The Call-Home Profile Configuration Mode is used to create groups of users that will...
  • Page 2146 Call-Home Profile Configuration Mode ▀ active active Activates this Smart Call Home profile. Product All Privilege Security Administrator, Administrator...
  • Page 2147Call-Home Profile Configuration Mode destination ▀ destination Configures the message destinations for this Smart Call Home profile. Product All Privilege...
  • Page 2148 Call-Home Profile Configuration Mode ▀ destination preferred-msg-format [ long-text | short-text | xml] Specifies the message format for the...
  • Page 2149Call-Home Profile Configuration Mode end ▀ end Exits the current configuration mode and returns to the Exec mode. Product All...
  • Page 2150 Call-Home Profile Configuration Mode ▀ exit exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2151Call-Home Profile Configuration Mode subscribe-to-alert-group ▀ subscribe-to-alert-group Subscribes this profile to the alert group for the call-home profile. Product All...
  • Page 2152 Call-Home Profile Configuration Mode ▀ subscribe-to-alert-group  warning – Level 7: warning event, matches platform logging level warning. ...
  • Page 2153Call-Home Profile Configuration Mode subscribe-to-alert-group ▀  notification – Level 8: notification event, matches platform logging level unusual.  normal...
  • Page 2154
  • Page 2155: Chapter 42 CAMEL Service Configuration Mode CommandsChapter 42 CAMEL Service Configuration Mode Commands The CAMEL Service configuration mode provides a set of commands to define the...
  • Page 2156 CAMEL Service Configuration Mode Commands ▀ associate-sccp-network associate-sccp-network Configure an association between this CAMEL service and a specified SCCP...
  • Page 2157CAMEL Service Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2158 CAMEL Service Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2159CAMEL Service Configuration Mode Commands tcap destination-address ▀ tcap destination-address Configure the gsmSCF address to be used to open TC...
  • Page 2160 CAMEL Service Configuration Mode Commands ▀ timeout timeout Configure a range of timers needed to support CAMEL service. Product...
  • Page 2161CAMEL Service Configuration Mode Commands timeout ▀ gprs-tssf-timer seconds Configure the GPRS TSSF timer to set the length of time...
  • Page 2162
  • Page 2163: Chapter 43 Card Configuration Mode CommandsChapter 43 Card Configuration Mode Commands Use the Card configuration mode to create and manage the physical cards in the...
  • Page 2164 Card Configuration Mode Commands ▀ aps aps Configures the parameters for the automatic protection switching (APS) feature for SONET...
  • Page 2165Card Configuration Mode Commands aps ▀ non-revertive Prevents the network from automatically reverting to the original working line/port when the...
  • Page 2166 Card Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2167Card Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 2168 Card Configuration Mode Commands ▀ framing framing Configures the type of framing to be used for the signaling generated...
  • Page 2169Card Configuration Mode Commands framing ▀ sonet [ ds1 | e1 ] Configures the system to use SONET signal framing...
  • Page 2170 Card Configuration Mode Commands ▀ header-type header-type Defines the size of the header frame for Frame Relay transmissions over...
  • Page 2171Card Configuration Mode Commands initial-e1-framing ▀ initial-e1-framing Configures the type of framing mode that will initially be available at the...
  • Page 2172 Card Configuration Mode Commands ▀ link-aggregation link-aggregation Configures system priority and toggle link settings for Link Aggregation. These parameters...
  • Page 2173Card Configuration Mode Commands link-aggregation ▀ Usage The system MAC address (6 bytes) and system priority (2 bytes) combine to...
  • Page 2174 Card Configuration Mode Commands ▀ mode mode Sets the application processor card’s current administrative state to active or standby....
  • Page 2175Card Configuration Mode Commands mode ▀ Usage Set the desired mode of mated cards. The card targeted for maintenance is...
  • Page 2176 Card Configuration Mode Commands ▀ redundancy redundancy Configures the type of redundancy for a line card or SPIO. (ASR...
  • Page 2177Card Configuration Mode Commands redundancy ▀ card-mode Specifies no port redundancy is used. This is used mostly for legacy products....
  • Page 2178 Card Configuration Mode Commands ▀ redundant with redundant with Enables side-by-side (SBS) redundancy for XGLCs. (ASR 5000 only) Product...
  • Page 2179Card Configuration Mode Commands service-type ▀ service-type Configures the type of service that the CLC or CLC2 line card will...
  • Page 2180 Card Configuration Mode Commands ▀ service-type unspecified This is the default mode for a CLC or CLC2. Important: You...
  • Page 2181Card Configuration Mode Commands shutdown ▀ shutdown Configures a card for active service or terminates all processes on the card....
  • Page 2182
  • Page 2183: Chapter 44 CBS Service Configuration Mode CommandsChapter 44 CBS Service Configuration Mode Commands The Cell Broadcasting Service (CBS) Configuration Mode is used to create and manage...
  • Page 2184 CBS Service Configuration Mode Commands ▀ bind bind This command binds the CBS service to the IP address of...
  • Page 2185CBS Service Configuration Mode Commands cbc-address-validation ▀ cbc-address-validation This command is used for validation of Cell Broadcasting Centre IP address....
  • Page 2186 CBS Service Configuration Mode Commands ▀ cbc-server cbc-server This command configures the CBC server for cell broadcasting service. Product...
  • Page 2187CBS Service Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2188 CBS Service Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2189CBS Service Configuration Mode Commands sabp timer ▀ sabp timer Configures the Service Area Broadcast Protocol (SABP) procedure timer value....
  • Page 2190 CBS Service Configuration Mode Commands ▀ sabp-class2-aggregation sabp-class2-aggregation This command configures the SABP class-2 aggregation timeout. Product HNB-GW Privilege...
  • Page 2191CBS Service Configuration Mode Commands tcp-keepalive ▀ tcp-keepalive This comand is TCP Keepalive timer. It is used to check liveness...
  • Page 2192 CBS Service Configuration Mode Commands ▀ tcp-mode tcp-mode This comand configures the mode of TCP connection. Product HNB-GW Privilege...
  • Page 2193: Chapter 45 Channelized Port Configuration Mode CommandsChapter 45 Channelized Port Configuration Mode Commands The channelized port configuration mode provides the commands to create, configure, bind, and...
  • Page 2194 Channelized Port Configuration Mode Commands ▀ alarm-disable alarm-disable Entering this command disables the alarm detection for designated sets of...
  • Page 2195Channelized Port Configuration Mode Commands alarm-soak-timer ▀ alarm-soak-timer This command sets the timer for the duration that a detected alarm...
  • Page 2196 Channelized Port Configuration Mode Commands ▀ clock-source clock-source This command sets the source of the port’s transmit clock. Important:...
  • Page 2197Channelized Port Configuration Mode Commands description ▀ description Defines descriptive text that provides useful information about the port. Product SGSN...
  • Page 2198 Channelized Port Configuration Mode Commands ▀ dlci dlci Identifies a data link connection identifier (DLCI), a frame relay logical...
  • Page 2199Channelized Port Configuration Mode Commands dlci ▀ timeslot slot# Identifies one of the timeslots within a timeslot group configured with...
  • Page 2200 Channelized Port Configuration Mode Commands ▀ end end Exits the Channelized Port configuration mode and returns to the Exec...
  • Page 2201Channelized Port Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2202 Channelized Port Configuration Mode Commands ▀ frame-relay frame-relay Configures the parameters for the Frame Relay connections for E1, DS1...
  • Page 2203Channelized Port Configuration Mode Commands frame-relay ▀ frame-relay lmi_type lmi_type Default: none. Line management options include:  ansi - ANSI...
  • Page 2204 Channelized Port Configuration Mode Commands ▀ hopath-sdsf hopath-sdsf Configures the high-order path for degrade/signal failure (SDSF) bit error rate...
  • Page 2205Channelized Port Configuration Mode Commands line-timing ▀ line-timing This command enables the SPIO to recover transmit timing source via the...
  • Page 2206 Channelized Port Configuration Mode Commands ▀ loopback loopback Configures the type of loopback mode used for diagnostic testing. Product...
  • Page 2207Channelized Port Configuration Mode Commands lopath-sdsf ▀ lopath-sdsf Configures the low-order path for signal degrade/signal failure (SDSF) bit error rate...
  • Page 2208 Channelized Port Configuration Mode Commands ▀ path path This command configures the parameters that define the routing path for...
  • Page 2209Channelized Port Configuration Mode Commands path ▀ frame-mapping Frame mapping sets the channelization according to the national standards that correlate...
  • Page 2210 Channelized Port Configuration Mode Commands ▀ path  option for either E1 or DS1:  unframed mapping-mode  bit-sync...
  • Page 2211Channelized Port Configuration Mode Commands path ▀  n393 value - Monitored events count value. Default is 2. value must...
  • Page 2212 Channelized Port Configuration Mode Commands ▀ preferred slot preferred slot Identifies which card in a chassis should assume revertive...
  • Page 2213Channelized Port Configuration Mode Commands pwe3-cesopsn ▀ pwe3-cesopsn This command has been deprecated and replaced by the mtp2 command. Command...
  • Page 2214 Channelized Port Configuration Mode Commands ▀ shutdown shutdown Terminates all processes supporting the port or blocks the shutting down...
  • Page 2215Channelized Port Configuration Mode Commands snmp trap link-status ▀ snmp trap link-status Enables/disables the generation and sending of an SNMP...
  • Page 2216 Channelized Port Configuration Mode Commands ▀ threshold high-activity threshold high-activity Configures the port’s high and low activity thresholds. Product...
  • Page 2217Channelized Port Configuration Mode Commands threshold monitoring ▀ threshold monitoring Enables thresholding for port-level values. Product SGSN Privilege Security Administrator,...
  • Page 2218 Channelized Port Configuration Mode Commands ▀ threshold monitoring Global Configuration Mode Commands chapter of this reference for information on...
  • Page 2219Channelized Port Configuration Mode Commands threshold rx-utilization ▀ threshold rx-utilization Configures thresholds for receive-port utilization. Product SGSN Privilege Security Administrator,...
  • Page 2220 Channelized Port Configuration Mode Commands ▀ threshold rx-utilization Refer to the threshold poll command in the Global Configuration Mode...
  • Page 2221Channelized Port Configuration Mode Commands threshold tx-utilization ▀ threshold tx-utilization Configures thresholds for transmit port utilization. Product SGSN Privilege Security...
  • Page 2222 Channelized Port Configuration Mode Commands ▀ threshold tx-utilization Refer to the threshold poll command in the Global Configuration Mode...
  • Page 2223Channelized Port Configuration Mode Commands toh-sdsf ▀ toh-sdsf Enable/disable line SDSF BER thresholds and configure the line transport overhead (TOH)...
  • Page 2224 Channelized Port Configuration Mode Commands ▀ vc-mapping vc-mapping This command has been deprecated. Go to the frame-mapping keyword in...
  • Page 2225: Chapter 46 Cipher Suite Configuration Mode CommandsChapter 46 Cipher Suite Configuration Mode Commands The Cipher Suite Configuration Mode is used to configure the building blocks for...
  • Page 2226 Cipher Suite Configuration Mode Commands ▀ encryption encryption Specifies the encryption algorithm for the SSL cipher suite. Product SCM...
  • Page 2227Cipher Suite Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2228 Cipher Suite Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2229Cipher Suite Configuration Mode Commands hmac ▀ hmac Specifies the HMAC (keyed-Hash Message Authentication Code) for the SSL cipher suite....
  • Page 2230 Cipher Suite Configuration Mode Commands ▀ key-exchange key-exchange Specifies the key exchange algorithm for the SSL cipher suite. Product...
  • Page 2231: Chapter 47 Class-Map Configuration Mode CommandsChapter 47 Class-Map Configuration Mode Commands Class-Map is used to configure a packet classifier for the flow-based Traffic Policing feature...
  • Page 2232 Class-Map Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2233Class-Map Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product All...
  • Page 2234 Class-Map Configuration Mode Commands ▀ match any match any Allows all traffic types in this class map. Product PDSN...
  • Page 2235Class-Map Configuration Mode Commands match dst-ip-address ▀ match dst-ip-address Specifies a traffic classification rule based on the destination IP address...
  • Page 2236 Class-Map Configuration Mode Commands ▀ match dst-port-range match dst-port-range Specifies a traffic classification rule based on the range of...
  • Page 2237Class-Map Configuration Mode Commands match ip-tos ▀ match ip-tos Specifies a traffic classification rule based on the IP Type of...
  • Page 2238 Class-Map Configuration Mode Commands ▀ match ipsec-spi match ipsec-spi Specifies a traffic classification rule based on the IPSec Security...
  • Page 2239Class-Map Configuration Mode Commands match packet-size ▀ match packet-size Specifies a traffic classification rule based on the size of packet....
  • Page 2240 Class-Map Configuration Mode Commands ▀ match protocol match protocol Specifies a traffic classification rule based on the protocol used...
  • Page 2241Class-Map Configuration Mode Commands match protocol ▀ tcp Sets the match rule for a session flow using Transmission Control Protocol...
  • Page 2242 Class-Map Configuration Mode Commands ▀ match src-ip-address match src-ip-address Specifies a traffic classification rule based on the source IP...
  • Page 2243Class-Map Configuration Mode Commands match src-port-range ▀ match src-port-range Specifies a traffic classification rule based on the range of source...
  • Page 2244
  • Page 2245: Chapter 48 CGW Service Configuration Mode CommandsChapter 48 CGW Service Configuration Mode Commands Creates Convergence Gateway (CGW) service and enters CGW service configuration mode. Mode Exec...
  • Page 2246 CGW Service Configuration Mode Commands ▀ associate associate This command associates another service to this CGW service. Product SaMOG...
  • Page 2247CGW Service Configuration Mode Commands associate ▀ context_name must be an alphanumeric string of 1 through 79 characters. mrme-service mrme_service...
  • Page 2248 CGW Service Configuration Mode Commands ▀ bind bind This command allows you to bind an IPv4 and/or IPv6 address...
  • Page 2249CGW Service Configuration Mode Commands enable-bra-failure-handling ▀ enable-bra-failure-handling This command enables the HAMGR to select the first session incase the...
  • Page 2250 CGW Service Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 2251CGW Service Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2252 CGW Service Configuration Mode Commands ▀ gre sequence-numbers gre sequence-numbers This command allows you to enable or disable the...
  • Page 2253CGW Service Configuration Mode Commands reg-lifetime ▀ reg-lifetime Configures Mobile IPV6 session registration lifetime in seconds. Product SaMOG Privilege Security...
  • Page 2254 CGW Service Configuration Mode Commands ▀ revocation revocation Configures Binding Revocation support for specific CGW service. Product SaMOG Privilege...
  • Page 2255CGW Service Configuration Mode Commands revocation ▀ revocation retransmission-timeout 1000 Command Line Interface Reference, StarOS Release 18 ▄ 2255
  • Page 2256 CGW Service Configuration Mode Commands ▀ session-delete-delay session-delete-delay Configures CGW to retain the session on receiving a termination request...
  • Page 2257CGW Service Configuration Mode Commands timestamp-option-validation ▀ timestamp-option-validation Confiugures validation of Timestamp Option in Binding Update messages. By default Timestamp...
  • Page 2258 CGW Service Configuration Mode Commands ▀ timestamp-replay-protection timestamp-replay-protection This command designates timestamp replay protection scheme as per RFC 4285....
  • Page 2259: Chapter 49 Congestion Action Profile Configuration Mode CommandsChapter 49 Congestion Action Profile Configuration Mode Commands The Congestion Policy Configuration Mode is used to create and manage the...
  • Page 2260 Congestion Action Profile Configuration Mode Commands ▀ drop drop Specifies that incoming packets containing new session requests be dropped...
  • Page 2261Congestion Action Profile Configuration Mode Commands drop ▀ service-request Drops packets containing all service requests. This keyword option will be...
  • Page 2262 Congestion Action Profile Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec...
  • Page 2263Congestion Action Profile Configuration Mode Commands exclude-emergency-events ▀ exclude-emergency-events Excludes emergency events when a congestion control threshold is reached. Emergency...
  • Page 2264 Congestion Action Profile Configuration Mode Commands ▀ exclude-voice-events exclude-voice-events Excludes voice calls when a congestion control threshold is reached....
  • Page 2265Congestion Action Profile Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode....
  • Page 2266 Congestion Action Profile Configuration Mode Commands ▀ none none Specifies that no congestion control action be taken on an...
  • Page 2267Congestion Action Profile Configuration Mode Commands none ▀ service-request No congestion control action is taken for service requests when a...
  • Page 2268 Congestion Action Profile Configuration Mode Commands ▀ reject reject Processes a specified request when a congestion control threshold has...
  • Page 2269Congestion Action Profile Configuration Mode Commands reject ▀ service-request Rejects all service requests. This keyword option will be available only...
  • Page 2270 Congestion Action Profile Configuration Mode Commands ▀ report-overload report-overload Enables the MME to report overload conditions to eNodeBs to...
  • Page 2271Congestion Action Profile Configuration Mode Commands report-overload ▀ enobeb-percentage percentage Configures the percentage of known eNodeBs that will receive the...
  • Page 2272
  • Page 2273: Chapter 50 Connected Apps Configuration Mode CommandsChapter 50 Connected Apps Configuration Mode Commands The Connected Apps (CA) Configuration Mode is used to define CA client session...
  • Page 2274 Connected Apps Configuration Mode Commands ▀ activate activate Initiates a ConnectedApps (CA) client session with the IOS-XR server on...
  • Page 2275Connected Apps Configuration Mode Commands ca-certificate-name ▀ ca-certificate-name Configures a ConnectedApps (CA) client session with the IOS-XR server using TLS...
  • Page 2276 Connected Apps Configuration Mode Commands ▀ end end Exits the current configuration mode and returns to the Exec mode....
  • Page 2277Connected Apps Configuration Mode Commands exit ▀ exit Exits the current mode and returns to the parent configuration mode. Product...
  • Page 2278 Connected Apps Configuration Mode Commands ▀ ha-chassis-mode ha-chassis-mode Sets the High Availability (HA) mode for wsg-service virtual machines on...
  • Page 2279Connected Apps Configuration Mode Commands ha-network-mode ▀ ha-network-mode Sets the network mode for High Availability (HA) network configuration between VSMs...
  • Page 2280 Connected Apps Configuration Mode Commands ▀ rri-mode rri-mode Configures Reverse Route Injection (RRI) mode. (VPC-VSM only) Product SecGW Privilege...
  • Page 2281Connected Apps Configuration Mode Commands sess-ip-address ▀ sess-ip-address Sets the IP address for a Connected Apps (CA) session. Product SecGW...
  • Page 2282 Connected Apps Configuration Mode Commands ▀ sess-name sess-name Sets the name for a CA session. Product SecGW (WSG) Privilege...
  • Page 2283Connected Apps Configuration Mode Commands sess-passwd ▀ sess-passwd Sets a password for a CA session. Product SecGW (WSG) Privilege Security...
  • Page 2284 Connected Apps Configuration Mode Commands ▀ sess-userid sess-userid Defines a user identifier (username) for the CA session. Product SecGW...
  • Page 2285: Chapter 51 Content Filtering Policy Configuration Mode CommandsChapter 51 Content Filtering Policy Configuration Mode Commands The Content Filtering Policy Configuration Mode allows you to configure analysis and...
  • Page 2286 Content Filtering Policy Configuration Mode Commands ▀ analyze analyze Specifies the action to take for the indicated result after...
  • Page 2287Content Filtering Policy Configuration Mode Commands analyze ▀  ADVERT  ANON  ART  AUTO  BACKUP  BLACK...
  • Page 2288 Content Filtering Policy Configuration Mode Commands ▀ analyze  PEER  PERS  PHOTO  PLAG  POLTIC ...
  • Page 2289Content Filtering Policy Configuration Mode Commands analyze ▀ content-insert content_string: Specifies the content string to be inserted in place of...
  • Page 2290 Content Filtering Policy Configuration Mode Commands ▀ discarded-flow-content-id discarded-flow-content-id Accounts for packets discarded as a result of content filtering...
  • Page 2291Content Filtering Policy Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec mode....
  • Page 2292 Content Filtering Policy Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent configuration...
  • Page 2293Content Filtering Policy Configuration Mode Commands failure-action ▀ failure-action Specifies the failure action when the content filtering analysis results are...
  • Page 2294 Content Filtering Policy Configuration Mode Commands ▀ failure-action Important: Static-and-Dynamic Content Filtering is only supported in 9.0 and later...
  • Page 2295Content Filtering Policy Configuration Mode Commands timeout action ▀ timeout action This command has been deprecated, and is replaced by...
  • Page 2296
  • Page 2297: Chapter 52 Content Filtering Server Group Configuration Mode CommandsChapter 52 Content Filtering Server Group Configuration Mode Commands Content Filtering Server Group Configuration Mode sets the parameters for interoperating...
  • Page 2298 Content Filtering Server Group Configuration Mode Commands ▀ connection retry-timeout connection retry-timeout Configures the TCP connection retry timer for...
  • Page 2299Content Filtering Server Group Configuration Mode Commands deny-message ▀ deny-message Configures the text message that is returned to the subscriber...
  • Page 2300 Content Filtering Server Group Configuration Mode Commands ▀ deny-response code deny-response code Configures the deny response message that is...
  • Page 2301Content Filtering Server Group Configuration Mode Commands dictionary ▀ dictionary Specifies the dictionary to use for requests to the server(s)...
  • Page 2302 Content Filtering Server Group Configuration Mode Commands ▀ dictionary Usage Use this command to specify the standard and customized...
  • Page 2303Content Filtering Server Group Configuration Mode Commands end ▀ end Exits the current configuration mode and returns to the Exec...
  • Page 2304 Content Filtering Server Group Configuration Mode Commands ▀ exit exit Exits the current mode and returns to the parent...
  • Page 2305Content Filtering Server Group Configuration Mode Commands failure-action ▀ failure-action Specifies the actions to be taken when communication between ICAP...
  • Page 2306 Content Filtering Server Group Configuration Mode Commands ▀ failure-action url must be an alphanumeric string of 1 through 128...
  • Page 2307Content Filtering Server Group Configuration Mode Commands failure-action ▀  Redirect: Retransmitted packets are dropped and not charged.  Discard:...
  • Page 2308 Content Filtering Server Group Configuration Mode Commands ▀ icap server icap server Adds an Internet Content Adaptation Protocol (ICAP)...
  • Page 2309Content Filtering Server Group Configuration Mode Commands icap server ▀ priority priority Specifies priority of the ICAP server in the...
  • Page 2310 Content Filtering Server Group Configuration Mode Commands ▀ origin address origin address Specifies a bind address for the Content...
  • Page 2311Content Filtering Server Group Configuration Mode Commands response-timeout ▀ response-timeout Sets the response timeout for the ICAP connection between the...
  • Page 2312 Content Filtering Server Group Configuration Mode Commands ▀ timeout action timeout action This command has been deprecated, and is...
  • Page 2313Content Filtering Server Group Configuration Mode Commands url-extraction ▀ url-extraction Enables configuration of ICAP URL extraction behavior. Product CF Privilege...
  • Page 2314 Content Filtering Server Group Configuration Mode Commands ▀ url-extraction ▄ Command Line Interface Reference, StarOS Release 18 2314
  • Page 2315: Chapter 53 Context Configuration Mode Commands A-DChapter 53 Context Configuration Mode Commands A-D This section includes the commands aaa accounting through domain service. Mode Exec >...
  • Page 2316 Context Configuration Mode Commands A-D ▀ aaa accounting aaa accounting This command enables/disables accounting for subscribers and context-level administrative...
  • Page 2317Context Configuration Mode Commands A-D aaa accounting ▀ Important: The accounting parameters in the APN Configuration Mode take precedence over...
  • Page 2318 Context Configuration Mode Commands A-D ▀ aaa authentication aaa authentication This command enables/disables authentication for subscribers and context-level administrative...
  • Page 2319Context Configuration Mode Commands A-D aaa authentication ▀ Usage Use this command to enable/disable AAA authentication during specific maintenance activities...
  • Page 2320 Context Configuration Mode Commands A-D ▀ aaa constructed-nai aaa constructed-nai This command configures the password used during authentication for...
  • Page 2321Context Configuration Mode Commands A-D aaa constructed-nai ▀ situations in which an outbound username and password are configured and the...
  • Page 2322 Context Configuration Mode Commands A-D ▀ aaa constructed-nai Mobile Subscriber Mobile Country Code Mobile Network Code Identification Number (3...
  • Page 2323Context Configuration Mode Commands A-D aaa filter-id rulebase mapping ▀ aaa filter-id rulebase mapping This command configures the system to...
  • Page 2324 Context Configuration Mode Commands A-D ▀ aaa group aaa group This command enables/disables the creation, configuration or deletion of...
  • Page 2325Context Configuration Mode Commands A-D aaa nai-policy ▀ aaa nai-policy This command sets policies on how Network Access Identifiers (NAIs)...
  • Page 2326 Context Configuration Mode Commands A-D ▀ aaa nai-policy no aaa nai-policy reformat-alg-hex-0-9 ▄ Command Line Interface Reference, StarOS Release...
  • Page 2327Context Configuration Mode Commands A-D access-list undefined ▀ access-list undefined Configures the behavior of access control for the current context...
  • Page 2328 Context Configuration Mode Commands A-D ▀ administrator administrator Configures a user with Security Administrator privileges in the current context....
  • Page 2329Context Configuration Mode Commands A-D administrator ▀ ecs Permits the user to use ACS-specific configuration commands. Default: Permitted expiry-date date_time...
  • Page 2330 Context Configuration Mode Commands A-D ▀ administrator Specifies the maximum time, in seconds, the Security Administrator may have a...
  • Page 2331Context Configuration Mode Commands A-D apn ▀ apn Creates or deletes Access Point Name (APN) templates and enters the APN...
  • Page 2332 Context Configuration Mode Commands A-D ▀ apn  In StarOS v14.0 and later, up to 2048 APNs can be...
  • Page 2333Context Configuration Mode Commands A-D asn-qos-descriptor ▀ asn-qos-descriptor Creates, deletes or manages the Quality of Service (QoS) descriptor table identifier...
  • Page 2334 Context Configuration Mode Commands A-D ▀ asn-qos-descriptor Usage Use this command to configure a QoS description table to manage...
  • Page 2335Context Configuration Mode Commands A-D asn-service-profile ▀ asn-service-profile Creates, deletes or manages the Service Profiles Identifier for Access Service Node...
  • Page 2336 Context Configuration Mode Commands A-D ▀ asn-service-profile Usage Use this command to configure a service profile to apply the...
  • Page 2337Context Configuration Mode Commands A-D asngw-service ▀ asngw-service Creates, deletes or manages an Access Service Node Gateway (ASN-GW) service and...
  • Page 2338 Context Configuration Mode Commands A-D ▀ asngw-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2339Context Configuration Mode Commands A-D asnpc-service ▀ asnpc-service Creates, deletes or manages an ASN Paging Controller service to manage the...
  • Page 2340 Context Configuration Mode Commands A-D ▀ asnpc-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2341Context Configuration Mode Commands A-D associate ▀ associate Associate a global QoS Level 2 mapping table to a VPN context....
  • Page 2342 Context Configuration Mode Commands A-D ▀ atcf atcf This command enables Access Transfer Control Function (ATCF) functionality for the...
  • Page 2343Context Configuration Mode Commands A-D bfd-protocol ▀ bfd-protocol Enables or disables Bidirectional Forwarding Detection (BFD) protocol and enters the BFD...
  • Page 2344 Context Configuration Mode Commands A-D ▀ bgp extended-asn-cap bgp extended-asn-cap Enables or disables the router to send 4-octet ASN...
  • Page 2345Context Configuration Mode Commands A-D bmsc-profile ▀ bmsc-profile Creates or deletes Broadcast Multicast Service Center (BM-SC) profiles and enters the...
  • Page 2346 Context Configuration Mode Commands A-D ▀ busyout ip busyout ip Makes addresses from an IPv4 pool in the current...
  • Page 2347Context Configuration Mode Commands A-D busyout ip ▀ name pool_name Applies the named IP pool or IP pool group in...
  • Page 2348 Context Configuration Mode Commands A-D ▀ busyout ipv6 busyout ipv6 Makes addresses from an IPv6 pool in the current...
  • Page 2349Context Configuration Mode Commands A-D busyout ipv6 ▀ name pool_name Applies the named IPv6 pool or IPv6 pool group in...
  • Page 2350 Context Configuration Mode Commands A-D ▀ cae-group cae-group Creates a CAE group, which is a CAE server cluster that...
  • Page 2351Context Configuration Mode Commands A-D camel-service ▀ camel-service Creates an instance of the Customized Applications for Mobile Enhanced Logic (CAMEL)...
  • Page 2352 Context Configuration Mode Commands A-D ▀ cbs-service cbs-service Creates a new Cell Broadcasting Service (CBS) or specifies an existing...
  • Page 2353Context Configuration Mode Commands A-D cipher-suite ▀ cipher-suite Creates a new SSL cipher suite or specifies an existing cipher suite...
  • Page 2354 Context Configuration Mode Commands A-D ▀ class-map class-map Creates or deletes a class map. If the class-map is newly...
  • Page 2355Context Configuration Mode Commands A-D class-map ▀ Usage Use this command to enter in Class-Map Configuration Mode to set classification...
  • Page 2356 Context Configuration Mode Commands A-D ▀ closedrp-rp handoff closedrp-rp handoff Enables or disables session handoff between Closed-RP and RP...
  • Page 2357Context Configuration Mode Commands A-D config-administrator ▀ config-administrator Configures a context-level configuration administrator account within the current context. Product All...
  • Page 2358 Context Configuration Mode Commands A-D ▀ config-administrator ecs Permits the user access to ACS-specific configuration commands. Default: Enhanced Charging...
  • Page 2359Context Configuration Mode Commands A-D config-administrator ▀ Specifies the maximum amount of idle time, in seconds, the context-level administrator may...
  • Page 2360 Context Configuration Mode Commands A-D ▀ content-filtering content-filtering Enables or disables the creation, configuration or deletion of Content Filtering...
  • Page 2361Context Configuration Mode Commands A-D credit-control-service ▀ credit-control-service Enables or disables the creation, configuration or deletion of credit-control services. Product...
  • Page 2362 Context Configuration Mode Commands A-D ▀ credit-control-service credit-control-service test159 ▄ Command Line Interface Reference, StarOS Release 18 2362
  • Page 2363Context Configuration Mode Commands A-D crypto dns-nameresolver ▀ crypto dns-nameresolver Enables or disables the reverse DNS query from a Security...
  • Page 2364 Context Configuration Mode Commands A-D ▀ crypto group crypto group Creates or deletes a crypto group and enters the...
  • Page 2365Context Configuration Mode Commands A-D crypto ipsec transform-set ▀ crypto ipsec transform-set Configures transform-sets on the system and enters the...
  • Page 2366 Context Configuration Mode Commands A-D ▀ crypto ipsec transform-set cipher If ESP is enabled, this option must be used...
  • Page 2367Context Configuration Mode Commands A-D crypto map ▀ crypto map Configures the name of the policy and enters the specified...
  • Page 2368 Context Configuration Mode Commands A-D ▀ crypto map Usage Crypto Maps define the policies that determine how IPSec is...
  • Page 2369Context Configuration Mode Commands A-D crypto template ▀ crypto template Creates a new or specifies an existing crypto template and...
  • Page 2370 Context Configuration Mode Commands A-D ▀ crypto template crypto template crypto1 ikev2-dynamic ▄ Command Line Interface Reference, StarOS Release...
  • Page 2371Context Configuration Mode Commands A-D cscf access-profile ▀ cscf access-profile Creates a new or enters an existing access profile used...
  • Page 2372 Context Configuration Mode Commands A-D ▀ cscf acl cscf acl Creates an Access Control List (ACL) and enters the...
  • Page 2373Context Configuration Mode Commands A-D cscf diameter-selection ▀ cscf diameter-selection Creates a CDF or HSS diameter selection table and enters...
  • Page 2374 Context Configuration Mode Commands A-D ▀ cscf diameter-selection The following command creates an HSS diameter selection table and enters...
  • Page 2375Context Configuration Mode Commands A-D cscf ifc-filter-criteria ▀ cscf ifc-filter-criteria Creates Initial Filter Criteria (iFC) filter criteria for shared iFC...
  • Page 2376 Context Configuration Mode Commands A-D ▀ cscf ifc-filter-criteria as-default-handling { session-continue | session-terminate } Determines whether the dialog should...
  • Page 2377Context Configuration Mode Commands A-D cscf ifc-spt-condition ▀ cscf ifc-spt-condition Creates an Initial Filter Criteria (iFC) Service Point Trigger (SPT)...
  • Page 2378 Context Configuration Mode Commands A-D ▀ cscf ifc-spt-condition session-description sdp [ content sdp_data ] Specifies an SDP line type....
  • Page 2379Context Configuration Mode Commands A-D cscf ifc-spt-group ▀ cscf ifc-spt-group Creates an Initial Filter Criteria (iFC) Service Point Trigger (SPT)...
  • Page 2380 Context Configuration Mode Commands A-D ▀ cscf ifc-spt-group [context_name]hostname(config-cscf-ifc-spt-group)# iFC SPT Group Configuration Mode commands are defined in the...
  • Page 2381Context Configuration Mode Commands A-D cscf ifc-trigger-point ▀ cscf ifc-trigger-point Creates an Initial Filter Criteria (iFC) trigger point for shared...
  • Page 2382 Context Configuration Mode Commands A-D ▀ cscf ifc-trigger-point Example The following command creates iFC trigger point 11 with a...
  • Page 2383Context Configuration Mode Commands A-D cscf isc-template ▀ cscf isc-template Creates an IMS Service Control (ISC) template and enters the...
  • Page 2384 Context Configuration Mode Commands A-D ▀ cscf last-route-profile cscf last-route-profile Creates a last route profile, which will be specified...
  • Page 2385Context Configuration Mode Commands A-D cscf last-route-profile ▀ Important: Last route profiles are associated with peer servers in the CSCF...
  • Page 2386 Context Configuration Mode Commands A-D ▀ cscf peer-servers cscf peer-servers Creates a peer server type for next-hop session routing...
  • Page 2387Context Configuration Mode Commands A-D cscf peer-servers ▀ Usage Use this command to create a specific peer server and enter...
  • Page 2388 Context Configuration Mode Commands A-D ▀ cscf peer-servers-group cscf peer-servers-group Creates a peer servers group and enters the Peer...
  • Page 2389Context Configuration Mode Commands A-D cscf peer-servers-group ▀ Usage Use this command to create a specific peer servers group and...
  • Page 2390 Context Configuration Mode Commands A-D ▀ cscf policy cscf policy Creates a policy group for specific AoR profiles and...
  • Page 2391Context Configuration Mode Commands A-D cscf policy ▀ The following command creates a policy group named group2 and enters the...
  • Page 2392 Context Configuration Mode Commands A-D ▀ cscf prefix-table cscf prefix-table Creates a CSCF prefix table and enters the CSCF...
  • Page 2393Context Configuration Mode Commands A-D cscf routes ▀ cscf routes Creates a route group for specifying routing information and enters...
  • Page 2394 Context Configuration Mode Commands A-D ▀ cscf service cscf service Creates a CSCF service or specifies an existing CSCF...
  • Page 2395Context Configuration Mode Commands A-D cscf service ▀ [context_name]hostname(config-cscf-service)# CSCF Service Configuration Mode commands are defined in the CSCF Service...
  • Page 2396 Context Configuration Mode Commands A-D ▀ cscf session-template cscf session-template Creates a session template and/or enters the Session Template...
  • Page 2397Context Configuration Mode Commands A-D cscf session-template ▀ cscf session-template name sess_temp4 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 2398 Context Configuration Mode Commands A-D ▀ cscf subdomain-routes cscf subdomain-routes Creates subdomain-route list and enters the Subdomain-route List Configuration...
  • Page 2399Context Configuration Mode Commands A-D cscf translation ▀ cscf translation Creates a translation list and enters the Translation Configuration Mode....
  • Page 2400 Context Configuration Mode Commands A-D ▀ cscf translation The following command enters the Translation Configuration Mode for a translation...
  • Page 2401Context Configuration Mode Commands A-D cscf urn-service-list ▀ cscf urn-service-list Creates a URN service list and enters the URN List...
  • Page 2402 Context Configuration Mode Commands A-D ▀ cscf urn-service-list cscf urn-service-list name urn_list1 ▄ Command Line Interface Reference, StarOS Release...
  • Page 2403Context Configuration Mode Commands A-D css server ▀ css server In StarOS 9.0 and later releases, this command is obsolete....
  • Page 2404 Context Configuration Mode Commands A-D ▀ description description Allows you to enter descriptive text for this configuration. Product All...
  • Page 2405Context Configuration Mode Commands A-D dhcp-client-profile ▀ dhcp-client-profile Adds a specified Dynamic Host Control Protocol (DHCP) client profile name to...
  • Page 2406 Context Configuration Mode Commands A-D ▀ dhcp-client-profile Example The following command creates a DHCP client profile called test_profile :...
  • Page 2407Context Configuration Mode Commands A-D dhcp-server-profile ▀ dhcp-server-profile Adds a specified Dynamic Host Control Protocol (DHCP) server profile name to...
  • Page 2408 Context Configuration Mode Commands A-D ▀ dhcp-server-profile The following command creates a DHCP server profile called test_server_profile : dhcp-server-profile...
  • Page 2409Context Configuration Mode Commands A-D dhcp-service ▀ dhcp-service Adds a Dynamic Host Control Protocol (DHCP) service instance to the current...
  • Page 2410 Context Configuration Mode Commands A-D ▀ dhcp-service A maximum of 256 services (regardless of type) can be configured per...
  • Page 2411Context Configuration Mode Commands A-D dhcpv6-service ▀ dhcpv6-service Creates a specified DHCPv6 service name to allow configuration of DHCPv6 service...
  • Page 2412 Context Configuration Mode Commands A-D ▀ dhcpv6-service [context_name]hostname(config-dhcpv6-service)# DHCPv6 Service Configuration Mode commands are defined in the DHCPv6 Service...
  • Page 2413Context Configuration Mode Commands A-D diameter accounting ▀ diameter accounting This command configures Diameter accounting related settings. Product All Privilege...
  • Page 2414 Context Configuration Mode Commands A-D ▀ diameter accounting request-timeout:20 seconds dictionary { aaa-custom1 | aaa-custom10 | aaa-custom2 | aaa-custom3...
  • Page 2415Context Configuration Mode Commands A-D diameter accounting ▀ request-timeout duration Specifies how long the system will wait for a response...
  • Page 2416 Context Configuration Mode Commands A-D ▀ diameter authentication diameter authentication This command configures Diameter authentication related settings. Product All...
  • Page 2417Context Configuration Mode Commands A-D diameter authentication ▀  max-transmissions: Sets the configured maximum transmission attempts for Diameter authentication in...
  • Page 2418 Context Configuration Mode Commands A-D ▀ diameter authentication just-primary:Redirect only to primary host. primary-then-secondary:Redirect to primary host, if fails...
  • Page 2419Context Configuration Mode Commands A-D diameter authentication failure-handling ▀ diameter authentication failure-handling This command configures error handling for Diameter EAP...
  • Page 2420 Context Configuration Mode Commands A-D ▀ diameter authentication failure-handling  retry-and-terminate:First retries, if it fails then terminates the session...
  • Page 2421Context Configuration Mode Commands A-D diameter dictionary ▀ diameter dictionary This command is deprecated and is replaced by the diameter...
  • Page 2422 Context Configuration Mode Commands A-D ▀ diameter endpoint diameter endpoint This command enables the creation, configuration or deletion of...
  • Page 2423Context Configuration Mode Commands A-D diameter sctp ▀ diameter sctp This command configures Diameter SCTP parameters for all Diameter endpoints...
  • Page 2424 Context Configuration Mode Commands A-D ▀ diameter sctp The following command configures the maximum number of consecutive retransmissions to...
  • Page 2425Context Configuration Mode Commands A-D diameter origin ▀ diameter origin This command is deprecated and is replaced by the diameter...
  • Page 2426 Context Configuration Mode Commands A-D ▀ dns-client dns-client Creates a DNS client and/or enters the DNS Client Configuration Mode....
  • Page 2427Context Configuration Mode Commands A-D domain ▀ domain Configures a domain alias for the current context. Product HA PDSN Privilege...
  • Page 2428 Context Configuration Mode Commands A-D ▀ domain Usage Use this command to configure a domain alias when a single...
  • Page 2429: Chapter 54 Context Configuration Mode Commands E-HChapter 54 Context Configuration Mode Commands E-H This section includes the commands edr-module active-charging-service through hss-peer-service. Mode Exec > Global...
  • Page 2430 Context Configuration Mode Commands E-H ▀ eap-profile eap-profile Creates a new, or specifies an existing, Extensible Authentication Protocol (EAP)...
  • Page 2431Context Configuration Mode Commands E-H edr-module active-charging-service ▀ edr-module active-charging-service Enables the creation, configuration, or deletion of the Event Data...
  • Page 2432 Context Configuration Mode Commands E-H ▀ edr-module active-charging-service [context_name]hostname(config-redr)# Example The following command creates the EDR module for the...
  • Page 2433Context Configuration Mode Commands E-H egtp-service ▀ egtp-service Creates an eGTP service or specifies an existing eGTP service and enters...
  • Page 2434 Context Configuration Mode Commands E-H ▀ egtp-service Caution: Large numbers of services greatly increase the complexity of management and...
  • Page 2435Context Configuration Mode Commands E-H end ▀ end Exits the current configuration mode and returns to the Exec mode. Product...
  • Page 2436 Context Configuration Mode Commands E-H ▀ epdg-service epdg-service Creates Evolved Packet Data GateWay service and enters EPDG service configuration...
  • Page 2437Context Configuration Mode Commands E-H epdg-service ▀ The following command will enter the ePDG Service Configuration Mode creating the service...
  • Page 2438 Context Configuration Mode Commands E-H ▀ event-notif-endpoint event-notif-endpoint Enables creation, configuration or deletion of an Event Notification collection server...
  • Page 2439Context Configuration Mode Commands E-H event-notif-endpoint ▀ event-notif-endpoint event_intfc_3 Command Line Interface Reference, StarOS Release 18 ▄ 2439
  • Page 2440 Context Configuration Mode Commands E-H ▀ exit exit Exits the current mode and returns to the parent configuration mode....
  • Page 2441Context Configuration Mode Commands E-H external-inline-server ▀ external-inline-server This is a restricted command. Command Line Interface Reference, StarOS Release 18...
  • Page 2442 Context Configuration Mode Commands E-H ▀ fa-service fa-service Creates or deletes a foreign agent (FA) service or specifies an...
  • Page 2443Context Configuration Mode Commands E-H fa-service ▀ Example The following command will enter the FA Service Configuration Mode creating the...
  • Page 2444 Context Configuration Mode Commands E-H ▀ firewall max-associations firewall max-associations This command is obsolete. ▄ Command Line Interface Reference,...
  • Page 2445Context Configuration Mode Commands E-H fng-service ▀ fng-service Creates a new, or specifies an existing FNG service and enters the...
  • Page 2446 Context Configuration Mode Commands E-H ▀ ggsn-service ggsn-service Creates or deletes a Gateway GPRS Support Node (GGSN) service and...
  • Page 2447Context Configuration Mode Commands E-H ggsn-service ▀ The following command creates a GGSN service named ggsn1: ggsn-service ggsn1 Command Line...
  • Page 2448 Context Configuration Mode Commands E-H ▀ gprs-service gprs-service Creates a GPRS service instance and enters the GPRS Service Configuration...
  • Page 2449Context Configuration Mode Commands E-H gprs-service ▀ gprs-service gprs1 The following command removes the GPRS service named gprs1: no gprs-service...
  • Page 2450 Context Configuration Mode Commands E-H ▀ gs-service gs-service Creates a Gs service instance and enters the Gs Service Configuration...
  • Page 2451Context Configuration Mode Commands E-H gs-service ▀ The following command removes the Gs service named gs1: no gs-service gs1 Command...
  • Page 2452 Context Configuration Mode Commands E-H ▀ gtpc overload-protection egress gtpc overload-protection egress Configures the over-load protection of GGSN/PGW by...
  • Page 2453Context Configuration Mode Commands E-H gtpc overload-protection ingress ▀ gtpc overload-protection ingress Configures the over-load protection of GGSN/PGW by throttling...
  • Page 2454 Context Configuration Mode Commands E-H ▀ gtpc overload-protection ingress The following command enables the incoming GTP control messages in...
  • Page 2455Context Configuration Mode Commands E-H gtpp algorithm ▀ gtpp algorithm Configures GTPP routing algorithms for the current context. This command...
  • Page 2456 Context Configuration Mode Commands E-H ▀ gtpp attribute gtpp attribute Allows the specification of the optional attributes to be...
  • Page 2457Context Configuration Mode Commands E-H gtpp attribute ▀ | dynamic-flag-extension | furnish-charging-information | imei | imsi-unauthenticated- flag | lapi |...
  • Page 2458 Context Configuration Mode Commands E-H ▀ gtpp attribute apn-ni Default: Enabled This keyword controls the inclusion of the optional...
  • Page 2459Context Configuration Mode Commands E-H gtpp attribute ▀ Important: The Abnormal Bearer Termination feature is currently applicable only to custom34...
  • Page 2460 Context Configuration Mode Commands E-H ▀ gtpp attribute  Translation for the PS-Free-Format-Data in CDR will be conversion of...
  • Page 2461Context Configuration Mode Commands E-H gtpp attribute ▀ msisdn Default: Enabled This keyword controls the inclusion of the optional field...
  • Page 2462 Context Configuration Mode Commands E-H ▀ gtpp attribute plmn-id [ unknown-use ] Default: Enabled For SGSN, reports the SGSN...
  • Page 2463Context Configuration Mode Commands E-H gtpp attribute ▀ served-pdp-pdn-address-extension Default: Disabled In support of IPv4v6 dual-stack PDP address types, this...
  • Page 2464 Context Configuration Mode Commands E-H ▀ gtpp attribute sponsor-id Default: Disabled Includes the Sponsor ID and Application-Service-Provider-Identity fields in...
  • Page 2465Context Configuration Mode Commands E-H gtpp attribute ▀ Example The following command configures the system to present the time provided...
  • Page 2466 Context Configuration Mode Commands E-H ▀ gtpp charging-agent gtpp charging-agent Configures the IP address and port of the system...
  • Page 2467Context Configuration Mode Commands E-H gtpp charging-agent ▀ This command instructs the system as to what interface to use. The...
  • Page 2468 Context Configuration Mode Commands E-H ▀ gtpp data-record-format-version gtpp data-record-format-version Encodes the data record format version. The version indicates...
  • Page 2469Context Configuration Mode Commands E-H gtpp data-request sequence-numbers ▀ gtpp data-request sequence-numbers Configures the range of sequence numbers to be...
  • Page 2470 Context Configuration Mode Commands E-H ▀ gtpp dead-server suppress-cdrs gtpp dead-server suppress-cdrs Enables or disables CDR archiving when a...
  • Page 2471Context Configuration Mode Commands E-H gtpp deadtime ▀ gtpp deadtime Configures the amount of time to wait before attempting to...
  • Page 2472 Context Configuration Mode Commands E-H ▀ gtpp detect-dead-server gtpp detect-dead-server Configures the number of consecutive communication failures that could...
  • Page 2473Context Configuration Mode Commands E-H gtpp detect-dead-server ▀ If the system receives a GTPP Node Alive Request, Echo Request, or...
  • Page 2474 Context Configuration Mode Commands E-H ▀ gtpp dictionary gtpp dictionary Designates a dictionary used by GTPP for a specific...
  • Page 2475Context Configuration Mode Commands E-H gtpp dictionary ▀ custom4 This is a custom-defined dictionary that conforms to TS 32.015 v...
  • Page 2476 Context Configuration Mode Commands E-H ▀ gtpp dictionary Important: Note that the following warning message will be displayed whenever...
  • Page 2477Context Configuration Mode Commands E-H gtpp duplicate-hold-time ▀ gtpp duplicate-hold-time Configures the number of minutes to hold on to CDRs...
  • Page 2478 Context Configuration Mode Commands E-H ▀ gtpp echo-interval gtpp echo-interval Configures the frequency at which the system sends GTPP...
  • Page 2479Context Configuration Mode Commands E-H gtpp echo-interval ▀  Upon the execution of the gtpp sequence-numbers private-extensions command as described...
  • Page 2480 Context Configuration Mode Commands E-H ▀ gtpp egcdr gtpp egcdr Configures the eG-CDR and P-CDR (P-GW CDR) parameters and...
  • Page 2481Context Configuration Mode Commands E-H gtpp egcdr ▀  normal-release: Specifies to send Normal Release as causeForRecordClosing in PGW-CDRs. final-record...
  • Page 2482 Context Configuration Mode Commands E-H ▀ gtpp egcdr In this release, both current and new framework are functional to...
  • Page 2483Context Configuration Mode Commands E-H gtpp egcdr ▀ When the PDP context is terminated, all service data flow containers will...
  • Page 2484 Context Configuration Mode Commands E-H ▀ gtpp error-response gtpp error-response Configures the response when the system receives an error...
  • Page 2485Context Configuration Mode Commands E-H gtpp group ▀ gtpp group Configures GTPP server group in a context for the Charging...
  • Page 2486 Context Configuration Mode Commands E-H ▀ gtpp group In case no GTPP server group is configured in a context,...
  • Page 2487Context Configuration Mode Commands E-H gtpp max-cdrs ▀ gtpp max-cdrs Configures the maximum number of charging data records (CDRs) included...
  • Page 2488 Context Configuration Mode Commands E-H ▀ gtpp max-cdrs gtpp max-cdrs 10 ▄ Command Line Interface Reference, StarOS Release 18...
  • Page 2489Context Configuration Mode Commands E-H gtpp max-pdu-size ▀ gtpp max-pdu-size Configures the maximum payload size of a single GTPP packet...
  • Page 2490 Context Configuration Mode Commands E-H ▀ gtpp max-pdu-size UDP headers, and because the system may need to encapsulate GTPP...
  • Page 2491Context Configuration Mode Commands E-H gtpp max-retries ▀ gtpp max-retries Configures the maximum number of times the system attempts to...
  • Page 2492 Context Configuration Mode Commands E-H ▀ gtpp max-retries gtpp max-retries 8 ▄ Command Line Interface Reference, StarOS Release 18...
  • Page 2493Context Configuration Mode Commands E-H gtpp node-id ▀ gtpp node-id Configures the GTPP Node ID for all CDRs. Product ePDG...
  • Page 2494 Context Configuration Mode Commands E-H ▀ gtpp redirection-allowed gtpp redirection-allowed Configures the system to allow or disallow the redirection...
  • Page 2495Context Configuration Mode Commands E-H gtpp redirection-disallowed ▀ gtpp redirection-disallowed This command has been obsoleted and is replaced by the...
  • Page 2496 Context Configuration Mode Commands E-H ▀ gtpp server gtpp server Configures the Charging Gateway Function (CGF) accounting server(s) with...
  • Page 2497Context Configuration Mode Commands E-H gtpp server ▀ Specifies the relative priority of this CGF. When multiple CGFs are configured,...
  • Page 2498 Context Configuration Mode Commands E-H ▀ gtpp source-port-validation gtpp source-port-validation Toggles port checking for node alive/echo/redirection requests from the...
  • Page 2499Context Configuration Mode Commands E-H gtpp storage-server ▀ gtpp storage-server Configures information for the GTPP back-up storage server. Product ePDG...
  • Page 2500 Context Configuration Mode Commands E-H ▀ gtpp storage-server gtpp storage-server 192.168.1.2 ▄ Command Line Interface Reference, StarOS Release 18...
  • Page 2501Context Configuration Mode Commands E-H gtpp storage-server local file ▀ gtpp storage-server local file Configures the parameters for GTPP files...
  • Page 2502 Context Configuration Mode Commands E-H ▀ gtpp storage-server local file Default: Disabled format { custom-n } Configures the file...
  • Page 2503Context Configuration Mode Commands E-H gtpp storage-server local file ▀ This keyword also deletes the processed push files (tx.*,under $CDR_PATH/TX/tx.*)...
  • Page 2504 Context Configuration Mode Commands E-H ▀ gtpp storage-server local file start-file-seq-num seq_num [ recover-file-seq-num ] Specifies the start sequence...
  • Page 2505Context Configuration Mode Commands E-H gtpp storage-server max-retries ▀ gtpp storage-server max-retries Configures the maximum number of times the system...
  • Page 2506 Context Configuration Mode Commands E-H ▀ gtpp storage-server mode gtpp storage-server mode Configures storage mode, local or remote, for...
  • Page 2507Context Configuration Mode Commands E-H gtpp storage-server mode ▀ Usage This command configures whether the CDRs should be stored on...
  • Page 2508 Context Configuration Mode Commands E-H ▀ gtpp storage-server timeout gtpp storage-server timeout Configures the amount of time that must...
  • Page 2509Context Configuration Mode Commands E-H gtpp suppress-cdrs zero-volume ▀ gtpp suppress-cdrs zero-volume This command suppresses the CDRs with zero byte...
  • Page 2510 Context Configuration Mode Commands E-H ▀ gtpp suppress-cdrs zero-volume To suppress final zero volume CDRs and interim zero volume...
  • Page 2511Context Configuration Mode Commands E-H gtpp suppress-cdrs zero-volume-and-duration ▀ gtpp suppress-cdrs zero-volume-and-duration Suppresses the CDRs created by sessions having zero...
  • Page 2512 Context Configuration Mode Commands E-H ▀ gtpp timeout gtpp timeout Configures the amount of time that must pass with...
  • Page 2513Context Configuration Mode Commands E-H gtpp trigger ▀ gtpp trigger This command is left in place for backward compatibility. To...
  • Page 2514 Context Configuration Mode Commands E-H ▀ gtpp transport-layer gtpp transport-layer Selects the transport layer protocol for the Ga interface...
  • Page 2515Context Configuration Mode Commands E-H gtpu-service ▀ gtpu-service Creates a GTP-U service or specifies an existing GTP-U service and enters...
  • Page 2516 Context Configuration Mode Commands E-H ▀ gtpu-service large number of services only be configured if your application absolutely requires...
  • Page 2517Context Configuration Mode Commands E-H ha-service ▀ ha-service Creates/deletes a home agent service or specifies an existing HA service for...
  • Page 2518 Context Configuration Mode Commands E-H ▀ ha-service ha-service sampleService The following command will remove sampleService as being a defined...
  • Page 2519Context Configuration Mode Commands E-H hnbgw-service ▀ hnbgw-service Creates or removes an Home Node B Gateway (HNB-GW) service or configures...
  • Page 2520 Context Configuration Mode Commands E-H ▀ hnbgw-service Entering this command results in the following prompt: [context_name]hostname(config-hnbgw-service)# The commands available...
  • Page 2521Context Configuration Mode Commands E-H hsgw-service ▀ hsgw-service Creates an HSGW service or specifies an existing HSGW service and enters...
  • Page 2522 Context Configuration Mode Commands E-H ▀ hsgw-service [context_name]hostname(config-hsgw-service)# HSGW Service Configuration Mode commands are defined in the HSGW Service...
  • Page 2523Context Configuration Mode Commands E-H hss-peer-service ▀ hss-peer-service Creates a Home Subscriber Service (HSS) peer service or configures an existing...
  • Page 2524 Context Configuration Mode Commands E-H ▀ hss-peer-service Caution: A maximum of 256 services (regardless of type) can be configured...
  • Page 2525: Chapter 55 Context Configuration Mode Commands I-MChapter 55 Context Configuration Mode Commands I-M This section includes the commands ikev1 disable-initial-contact through multicast-proxy service. Mode Exec >...
  • Page 2526 Context Configuration Mode Commands I-M ▀ ikev1 disable-initial-contact ikev1 disable-initial-contact Disables the sending of the INITIAL-CONTACT message in the...
  • Page 2527Context Configuration Mode Commands I-M ikev1 disable-phase1-rekey ▀ ikev1 disable-phase1-rekey Configures the rekeying of Phase1 SA when the Internet Security...
  • Page 2528 Context Configuration Mode Commands I-M ▀ ikev1 keepalive dpd ikev1 keepalive dpd Configures the ISAKMP IPSec Dead Peer Detection...
  • Page 2529Context Configuration Mode Commands I-M ikev1 keepalive dpd ▀ This functionality is for use with the Redundant IPSec Tunnel Fail-over...
  • Page 2530 Context Configuration Mode Commands I-M ▀ ikev1 policy ikev1 policy Configures or creates an ISAKMP policy with the specified...
  • Page 2531Context Configuration Mode Commands I-M ikev2-ikesa ▀ ikev2-ikesa Creates a new, or specifies an existing, IKEv2 security association parameters and...
  • Page 2532 Context Configuration Mode Commands I-M ▀ ikev2-ikesa IKEv2 Security Association Configuration Mode commands are defined in the IKEv2 Security...
  • Page 2533Context Configuration Mode Commands I-M ims-auth-service ▀ ims-auth-service This command enables the creation, configuration or deletion of an IMS authorization...
  • Page 2534 Context Configuration Mode Commands I-M ▀ ims-auth-service Usage Use this command to create/configure/delete an IMS authorization service for Gx...
  • Page 2535Context Configuration Mode Commands I-M ims-sh-service ▀ ims-sh-service Creates the specified IP Multimedia Subsystem (IMS) Sh service name to allow...
  • Page 2536 Context Configuration Mode Commands I-M ▀ inspector inspector Configures a context-level inspector account within the current context. Product All...
  • Page 2537Context Configuration Mode Commands I-M inspector ▀ noecs: Prevents the specific user to access ACS-specific configuration commands. expiry-date date_time Specifies...
  • Page 2538 Context Configuration Mode Commands I-M ▀ inspector The following command removes a context-level inspector account named user1: no inspector...
  • Page 2539Context Configuration Mode Commands I-M interface ▀ interface Creates or deletes an interface or specifies an existing interface. By identifying...
  • Page 2540 Context Configuration Mode Commands I-M ▀ interface point-to-point Creates a permanent virtual connection (PVC) in the current context and...
  • Page 2541Context Configuration Mode Commands I-M ip access-group ▀ ip access-group Configures an access group with an Access Control List (ACL)...
  • Page 2542 Context Configuration Mode Commands I-M ▀ ip access-group Refer to the Access Control Lists appendix of the System Administration...
  • Page 2543Context Configuration Mode Commands I-M ip access-list ▀ ip access-list Enables creation, configuration or deletion of an IP Access List...
  • Page 2544 Context Configuration Mode Commands I-M ▀ ip access-list Refer to the Access Control Lists appendix of the System Administration...
  • Page 2545Context Configuration Mode Commands I-M ip arp ▀ ip arp Configures the allocation retention priority (ARP) options for the current...
  • Page 2546 Context Configuration Mode Commands I-M ▀ ip arp ip arp 10.2.3.4 F1:E2:D4:C5:B6:A7 no ip arp 10.2.3.4 The following commands...
  • Page 2547Context Configuration Mode Commands I-M ip as-path access-list ▀ ip as-path access-list Defines Border Gateway Protocol (BGP) Autonomous System (AS)...
  • Page 2548 Context Configuration Mode Commands I-M ▀ ip community-list ip community-list Configures filtering via a BGP community list. To filter...
  • Page 2549Context Configuration Mode Commands I-M ip community-list ▀  internet – Advertise this route to the internet community, and any...
  • Page 2550 Context Configuration Mode Commands I-M ▀ ip dns-proxy source-address ip dns-proxy source-address Enables the proxy DNS functionality and identifies...
  • Page 2551Context Configuration Mode Commands I-M ip domain-lookup ▀ ip domain-lookup Enables or disables domain name lookup via domain name servers...
  • Page 2552 Context Configuration Mode Commands I-M ▀ ip domain-name ip domain-name Configures or removes a logical domain name for the...
  • Page 2553Context Configuration Mode Commands I-M ip extcommunity-list ▀ ip extcommunity-list Configures route target filtering via a BGP extended community list....
  • Page 2554 Context Configuration Mode Commands I-M ▀ ip extcommunity-list A BGP extended community defines a route target. MPLS VPNs use...
  • Page 2555Context Configuration Mode Commands I-M ip forward ▀ ip forward Configures an IP forwarding policy to forward outgoing pool packets...
  • Page 2556 Context Configuration Mode Commands I-M ▀ ip guarantee ip guarantee Enables and disables local switching of framed route packets....
  • Page 2557Context Configuration Mode Commands I-M ip identification packet-size-threshold ▀ ip identification packet-size-threshold Configures the packet size above which system will...
  • Page 2558 Context Configuration Mode Commands I-M ▀ ip igmp profile ip igmp profile Configures an Internet Group Management Protocol (IGMP)...
  • Page 2559Context Configuration Mode Commands I-M ip localhost ▀ ip localhost Configures or removes the static local host logical name to...
  • Page 2560 Context Configuration Mode Commands I-M ▀ ip name-servers ip name-servers Modifies the list of domain name servers the current...
  • Page 2561Context Configuration Mode Commands I-M ip name-servers ▀ Example ip name-servers 10.2.3.4 Command Line Interface Reference, StarOS Release 18 ▄...
  • Page 2562 Context Configuration Mode Commands I-M ▀ ip pool ip pool Enables creation, configuration or deletion of IP address pools...
  • Page 2563Context Configuration Mode Commands I-M ip pool ▀ no Removes the specified IP address pool from the current context’s configuration,...
  • Page 2564 Context Configuration Mode Commands I-M ▀ ip pool public [ priority ] Address pool is used in priority order...
  • Page 2565Context Configuration Mode Commands I-M