Cisco Cisco ASR 5000
APN Configuration Mode Commands
authentication ▀
Command Line Interface Reference, StarOS Release 18 ▄
1303
authentication
Configures the APN’s authentication parameters.
Product
GGSN
P-GW
PDG/TTG
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
authentication [ [ msid-auth | imsi-auth [ password-use-pco | username-strip-apn |
prefer-chap-pco ] | msisdn-auth [ password-use-pco | username-strip-apn
prefer-chap-pco ] | msisdn-auth [ password-use-pco | username-strip-apn
|
username-
append-apn | prefer-chap-pco ] | eap initial-access-request [ authenticate-authorize |
authenticate-only ] | [ allow-noauth
authenticate-only ] | [ allow-noauth
[
pco-usernmae
{
chap | pap
} ]
] [ chap preference
[
convert-to-mschap
]
] [ mschap preference ] [ pap preference ] ]
default authentication
default
Sets the default authentication type for this APN. By default
allow-noauth
is the type for authentication for
an APN.
msid-auth
Obsolete. Use
imsi-auth
.
imsi-auth
Default: Disabled.
Configures the APN to attempt to authenticate the subscriber based on their International Mobile Subscriber
Identification (IMSI) number.
Configures the APN to attempt to authenticate the subscriber based on their International Mobile Subscriber
Identification (IMSI) number.
msisdn-auth
Default: Disabled.
Configures the APN to attempt to authenticate the subscriber based on their Mobile Station International
Integrated Services Digital Network (MSISDN) number as described in the Usage section of this command.
Configures the APN to attempt to authenticate the subscriber based on their Mobile Station International
Integrated Services Digital Network (MSISDN) number as described in the Usage section of this command.