Cisco Cisco ASR 5000
APN Configuration Mode Commands
content-filtering category ▀
Command Line Interface Reference, StarOS Release 18 ▄
1323
content-filtering category
Enables or disables the specified pre-configured Category Policy Identifier for Category-based Content Filtering
support.
support.
Product
CF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
content-filtering category policy-idcf_policy_id
no content-filtering category policy-id
no
Disables the previously configured category policy identifier for Content Filtering support to the APN. This is
the default setting.
the default setting.
policy-id cf_policy_id
Applies the specified content filtering category policy ID, configured in the ACS Configuration Mode, to this
APN.
APN.
cf_policy_id
must be a category policy ID entered as an integer from 1 through 4294967295.
If the specified category policy ID is not configured in the ACS Configuration Mode, all packets will be
passed regardless of the categories determined for such packets.
passed regardless of the categories determined for such packets.
Important:
Category Policy ID configured through this mode overrides the Category Policy ID configured
through
content-filtering category policy-id
command in the ACS Rulebase Configuration Mode.
Usage
Use this command to enter the Content Filtering Policy Configuration Mode and to enable or disable the
Content Filtering Category Policy ID for an APN.
Content Filtering Category Policy ID for an APN.
Important:
If Content Filtering Category Policy ID is not specified here the similar command in the ACS
Rulebase Configuration Mode determines the policy.
Up to 64 different policy IDs can be defined.
Example