Cisco Cisco ASR 5000
APN Configuration Mode Commands
nexthop-forwarding-address ▀
Command Line Interface Reference, StarOS Release 18 ▄
1421
nexthop-forwarding-address
Configures the next hop forwarding address for the APN.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
nexthop-forwarding-address ip_address
no nexthop-forwarding-address
no
Disables this function. This is the default setting.
ip_address
Specifies the IP address of the nexthop forwarding address in IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
Ensure the route is available for this nexthop address and its directly connected host. Use of an arbitrary
address can cause a routing loop within the host and lead to dropped packets.
hexadecimal notation.
Ensure the route is available for this nexthop address and its directly connected host. Use of an arbitrary
address can cause a routing loop within the host and lead to dropped packets.
Usage
Use this command to configure the next hop forwarding address for the APN.
Example
The following command configures the next hop forwarding address to 10.1.1.1:
nexthop-forwarding-address 10.1.1.1