Cisco Cisco ASR 5000
APN Configuration Mode Commands
▀ virtual-apn preference
▄ Command Line Interface Reference, StarOS Release 18
1484
access-gw-address { ip_address | ip_address/mask }
Specifies the Access Gateway (SGSN/SGW/Other) IP address.
ip_address
must be an IPv4 address in dotted-decimal or an IPv6 address in colon-separated-hexadecimal
notation.
ip_address/mask
must be an IPv4 address in dotted-decimal or an IPv6 address in colon-separated-
hexadecimal notation with network-host mask separation.
bearer-access-service service_name
Specifies the Bearer Access Service (GGSN/P-GW/Other) name. This service name is unique across the
context.
context.
service_name
must be an alphanumeric string of 1 through 63 characters.
For eWAG and IPSG, this option is not supported in this release.
cc-profile cc_profile_index
Specifies the charging characteristics (CC)-profile index.
cc_profile_index
must be an integer from 1 to 15.
For eWAG and IPSG, this option is not supported in this release.
domain domain_name
Specifies the domain name (realm). This is compared with the domain name portion of subscriber’s username
(user@domain).
(user@domain).
domain_name
must be an alphanumeric string of 1 through 79 characters, is case sensitive and can contain
all special characters.
For eWAG and IPSG, this option is not supported in this release.
For eWAG and IPSG, this option is not supported in this release.
mcc mcc_number mnc mnc_number
mcc
: Specifies the mobile country code (MCC) portion of the PLMN’s identifier.
mcc_number
is the PLMN MCC identifier and can be configured to any 3-digit integer value between 100
and 999.
mnc
: Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_number
is the PLMN MNC identifier and can be configured to any 2- or 3-digit integer value between
00 and 999.
For eWAG and IPSG, this option is not supported in this release.
For eWAG and IPSG, this option is not supported in this release.
msin-range from msin_range_from to msin_range_to
This option is supported only for the GGSN.
Specifies the IMSI MSIN range.
Specifies the IMSI MSIN range.
msin_range_from
is the start prefix of the IMSI MSIN range and can be configured between 0 and
9999999999.
msin_range_to
is the end prefix of the IMSI MSIN range and can be configured as a string of size 1 to 10
digits between 0 and 9999999999.
msin-range
should follow the following rules:
Start prefix (such as
msin_range_from
) and end prefix (such as
msin_range_from
) must be of the
same length.
Total length of mcc + mnc + msin-range <= 15 digits.
For a given combination of mcc + mnc + msin-range (start-end prefix), overlapping range is not
allowed.