Cisco Cisco ASR 5000

Page of 9109
  APN Profile Configuration Mode 
dedicated-bearers  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
1503 
dedicated-bearers 
Configures the MME to either accept or reject dedicated GBR and Non-GBR bearers. 
Product
 
MME 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > APN Profile Configuration 
configure > apn-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(apn-profile-profile_name)# 
Syntax
 
dedicated-bearers { gbr { accept | reject } | non-gbr { accept | reject } } 
[ remove ] dedicated-bearers { gbr | non-gbr } 
remove
 
Removes the configuration, returning the system to the default setting where the MME accepts GBR or Non-
GBR dedicated bearers. 
gbr { accept | reject }
 
Configures the MME to 
accept
 or 
reject
 dedicated GBR bearers. 
non-gbr { accept | reject }
 
Configures the MME to 
accept
 or 
reject
 dedicated Non-GBR bearers. 
Usage 
The MME differentiates GBR and Non-GBR dedicated bearers as follows: GBR Bearers - QCI value ranges 
from 1 to 4; Non-GBR bearers - QCI value ranges from 5-9. 
In the case of a UE-initiated Bearer Resource Allocation Reject, the ESM cause “EPS QOS not accepted” is 
used and the corresponding bearer allocation reject MME statistic is incremented.  
In the case of a Create Bearer Request Reject, the EGTP cause “Service denied” is used and the 
corresponding EGTP statistic is incremented. 
Note: Handling of multiple bearers in a Create Bearer request from S-GW for Partial accept/reject of 
GBR/Non-GBR dedicated bearers is a current limitation. 
Example
 
The following commands configure the MME to reject both GBR and Non-GBR dedicated bearers: 
dedicated-bearers gbr reject 
dedicated-bearers non-gbr reject