Cisco Cisco ASR 5000

Page of 9109
  APN Profile Configuration Mode 
ip access-group  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
1523 
ip access-group 
Configure the name of the access control list (ACL) for incoming and outgoing packets. 
Product
 
SaMOG 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > APN Profile Configuration 
configure > apn-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(apn-profile-profile_name)# 
Syntax
 
[ no ] ip access-group group_name [ in | out ] 
no
 
If previously configured, removes the IP access group.  
group_name
 
group_name 
must be an alphanumeric string of 1 to 47 characters. 
in | out
 
Specify the access group as inbound or outbound. 
Usage 
Use this command to configure the ACL name for incoming and outgoing packets to redirect HTTP packtes, 
allow DNS packets and drop other packets. The IP access group specified in this configuration will be used 
only if the AAA server does not specify the same during authentication. 
Important:
  This command is license dependent. Contact your Cisco account representative for more information 
on SaMOG feature license requirements. 
Example
 
The following command configures an IP access group called 
webauthaccgroup
 and sets it as inbound: 
ip access-group webauthaccgroup in