Cisco Cisco ASR 5000

Page of 9109
APN Profile Configuration Mode   
▀  ip address pool 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
1524 
   
ip address pool 
Configure the name of the IP address pool from which the IP address needs to be allocated to the user equipment (UE). 
Product
 
SaMOG 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > APN Profile Configuration 
configure > apn-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(apn-profile-profile_name)# 
Syntax
 
[ no ] ip address pool name pool_name 
no
 
If previously configured, removes the IP address pool to be used for web authorization.  
pool_name
 
pool_name
 must be an alphanumeric string of 1 to 31 characters. 
Usage 
Use this command to configure the name of the IP address pool from which the IP address is to be allocated 
to the UE. during the pre-authentication phase. The IP address pool name specified in this configuration will 
be used only if the AAA server does not specify the same during the pre-authentication phase. 
Important:
  This command is license dependent. Contact your Cisco account representative for more information 
on SaMOG feature license requirements. 
Example
 
The following command configures an IP address pool name of 
wapool
ip address pool name wapool