Cisco Cisco ASR 5000
APN Profile Configuration Mode
▀ timeout bearer-inactivity
▄ Command Line Interface Reference, StarOS Release 18
1570
uplinkbytes
Specifies that an uplink data volume threshold will be used.
bytes
must be a value from 1 to 4294967295.
downlinkbytes
Specifies that a downlink data volume threshold will be used.
bytes
must be a value from 1 to 4294967295.
exclude-default-bearer
Specifies that inactivity handling for the default bearer will be excluded.
Usage
Use this command to support a bearer inactivity timeout for GBR and non-GBR S-GW bearer type sessions
per Qos Class Identifier (QCI). This enables the deletion of bearers experiencing less data traffic than the
configured threshold value. This allows for more efficient use of system resources. This feature is supported
only for Pure S calls on the SAE-GW.
per Qos Class Identifier (QCI). This enables the deletion of bearers experiencing less data traffic than the
configured threshold value. This allows for more efficient use of system resources. This feature is supported
only for Pure S calls on the SAE-GW.
Example
The following example configures a 5 minute dedicated bearer timeout setting for GBR bearers on a
downlink volume threshold of 100000 bytes.
downlink volume threshold of 100000 bytes.
timeout bearer-inactivity gbr 300 downlink 100000