Cisco Cisco ASR 5000

Page of 9109
Call Control Profile Configuration Mode   
▀  diameter-result-code-mapping 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
1956 
   
diameter-result-code-mapping 
Maps an EMM (EPS Mobility Management) NAS (Network Access Server) cause code to a Diameter result code. 
Product
 
MME 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
diameter-result-code-mapping s6a diameter_result_code mme-emm-cause mme_emm_error_code 
remove diameter-result-code-mapping s6a diameter_result_code 
remove diameter-result-code-mapping s6a diameter_result_code
 
Removes the mapping for the specified Diameter result code. 
s6a diameter_result_code
 
Specifies the Diameter result code to which the EMM NAS cause code is mapped. 
diameter_result_code
: Specify one of the supported Diameter result codes:  
 
diameter-authorization-rejected
 - s6a result code 5003. Default mapped EMM code: “No 
suitable cells in tracking area.” 
 
diameter-error-other
 - miscellaneous s6a error result code. Default mapped EMM code: 
“Network failure.” 
 
diameter-error-rat-not-allowed
 - s6a result code 5421. Default mapped EMM code: “No 
suitable cells in tracking area.” 
 
diameter-error-roaming-not-allowed
 - s6a result code 5004. Default mapped EMM code: 
“PLMN not allowed.” 
 
diameter-error-user-unknown
 - s6a result code 5001/5030. Default mapped EMM code: “EPS 
Service and non-EPS services not allowed.” 
 
diameter-invalid-avp-value
 - s6a result code 5004. Default mapped EMM code: “Network 
failure.” 
 
diameter-unable-to-comply
 - s6a result code 5012. Default mapped EMM code: “Network 
failure.” 
 
diameter-unknown-eps-subscription
 - s6a result code 5420. Default mapped EMM code: “No 
suitable cells in tracking area.”