Cisco Cisco ASR 5000

Call Control Profile Configuration Mode

diameter-result-code-mapping ▀

Command Line Interface Reference, StarOS Release 18 ▄

1957



diameter-unsupported-feature

- s6a result code 5011. Default mapped EMM code: “Network

failure.”

mme-emm-cause mme_emm_error_code

Specifies the EMM NAS cause code to be mapped to the Diameter result code.

mme_emm_error_code

: Specify one of the supported EMM NAS error codes:



eps-non-eps-not-allowed

: Specifies that the EMM NAS cause code #8 “EPS services and non-

EPS services not allowed” is to be mapped to the specified Diameter result code.



network-failure

: Specifies that the EMM NAS cause code #17 “Network failure” is to be mapped

to the specified Diameter result code.



no-suitable-cell-in-tracking-area

: Specifies that the EMM NAS cause code #15 “No

suitable cells in tracking area” is to be mapped to the specified Diameter result code.



plmn-not-allowed

: Specifies that the EMM NAS cause code #11 “PLMN not allowed” is to be

mapped to the specified Diameter result code.



roaming-not-allowed-in-this-tracking-area

: Specifies that the EMM NAS cause code #13

“Roaming not allowed in this tracking area” is to be mapped to the specified Diameter result code.



severe-network-failure

: Specifies that the EMM NAS cause code #42 “Severe network failure” is

to be mapped to the specified Diameter result code.



tracking-area-not-allowed

: Specifies that the EMM NAS cause code #12 “Tracking area not

allowed” is to be mapped to the specified Diameter result code.

Usage

Use this command to map a selected EMM NAS cause code to a specific Diameter result code.

Example

The following command maps the EMM NAS cause code “Roaming not allowed in this tracking area” to the
Diameter result code “S6a Diameter error RAT not allowed”:

diameter-result-code-mapping s6a diameter-error-rat-not-allowed mme-emm-
cause roaming-not-allowed-in-this-tracking-area