Cisco Cisco ASR 5000

Page of 9109
Call Control Profile Configuration Mode   
▀  gmm t3346 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
1982 
   
gmm t3346 
The 
gmm
 command includes a new keyword to set the MM T3346 back-off timer for a Call-Control Profile.  
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
gmm t3346 min minimum_minutes max maximum_minutes 
no gmm t3346  
no
 
Including this filter with the command removes the MM back-off timer definition from the Call-Control 
Profile configuration. 
 min minimum
 
Enter an integer from 1 to 15 to identify the minimum number of minutes the timer should run; default is 15 
minutes. 
 max maximum_minutes
 
Enter an integer from 1 to 30 to identify the maximum number of minutes the timer should run; default is 30 
minutes. 
Usage 
 
Under congestion, the SGSN can assign the T3346 back-off timers to the UEs and request the UEs not 
to access the network for a given (timer value) period of time. 
 
If an Attach Request or RAU Request or Service Request is rejected due to congestion, then the T3346 
value will be included in the reject message with GMM cause code 22 (congestion). The MM back-
off timer value sent will be chosen randomly from within the configured T3346 timer value range. 
 
If T3346 timer value is configured in a Call-Control Profile then it will override the back-off timer 
values defined for either the SGSN Service or GPRS Service configurations. 
 
The timer will be ignored if an Attach Request or RAU Request is received after congestion has 
cleared. 
Example
 
Use a command similar to the following to define a T3346 with a timeout range of 
2 to 15
 minutes.