Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ gtp send
▄ Command Line Interface Reference, StarOS Release 18
1986
ms-timezone
Instructs the SGSN to include this IE in GTP messages of the type Create PDP Request and Update PDP
Context Request. This IE specifies the offset between universal time and local time, where the MS currently
resides, in 15-minute steps.
This IE is sent by default.
Context Request. This IE specifies the offset between universal time and local time, where the MS currently
resides, in 15-minute steps.
This IE is sent by default.
rai
Configures the SGSN to include the Routing Area Identity (RAI) of the SGSN in the following situations:
2G new SGSN RAU
3G new SGSN SRNS
2G -> 3G HO (only if PLMN Id has changed)
3G -> 2G HO (only if PLMN Id has changed)
multiple IUPS service RAU (only if PLMN Id has changed)
multiple GPRS service RAU (only if PLMN Id has changed)
3G new SGSN RAU (change in behavior)
3G primary and secondary PDP activation (change in behavior)
2G primary and secondary PDP activation (change in behavior)
Optionally, this keyword can be followed with the keyword selection for the PLMN -
use-local-plmn
.
rat
Specifies which radio access technology (RAT) is being used by the MS (GERAN, UTRAN, or GAN).
Including this keyword instructs the SGSN to include this IE when sending GTP messages of the type Create
PDP Request and Update PDP Context Request.
This IE is sent by default.
Including this keyword instructs the SGSN to include this IE when sending GTP messages of the type Create
PDP Request and Update PDP Context Request.
This IE is sent by default.
uli
Specifies the CGI (MCC, MNC, etc.) and SAI of the MS where it is registered. Including this keyword
instructs the SGSN to include the IE when sending GTP messages of the type Create PDP Request and
Update PDP Context Request.
This IE is not sent by default.
Optionally, this keyword can be followed with the keyword selection for the PLMN -
instructs the SGSN to include the IE when sending GTP messages of the type Create PDP Request and
Update PDP Context Request.
This IE is not sent by default.
Optionally, this keyword can be followed with the keyword selection for the PLMN -
use-local-plmn
.
Important:
Currently, the next 5 (five) keywords, are only used with parameters
rai
or
uli
.
use-local-plmn
This keyword selects the local PLMN when network is not shared.
network-sharing
This keyword is used to configure network-sharing.
use-selected-plmn
This keyword selects the Selected PLMN when network is shared.