Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ lcs-ni
▄ Command Line Interface Reference, StarOS Release 18
2000
lcs-ni
This command enables/disables network-initiated Location Requests by access-type when Location Services
functionality is enabled.
functionality is enabled.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
lcs-ni { allow | restrict } access-type { gprs | umts }
allow
Enables network-initiated Location Requests . This is the default state when Location Services are enabled.
Usage
This command ties Location Service functionality to a call-control profile by IMSI so that Location Services
can optionally be determined by an operator policy for incoming calls.
can optionally be determined by an operator policy for incoming calls.
Example
Use the following command to enable or allow network-initiated Location Requests within a UMTS network
if this function has been restricted previously:
if this function has been restricted previously:
lcs-ni allow access-type umts