Cisco Cisco ASR 5000

Page of 9109
Call Control Profile Configuration Mode   
▀  local-cause-code-mapping hss-unavailable 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
2014 
   
local-cause-code-mapping hss-unavailable 
Configures the reject cause code to send to a UE when the HSS does not respond. 
Product
 
MME 
Privilege
 
Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
local-cause-code-mapping hss-unavailable emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | 
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed } 
 
remove local-cause-code-mapping hss-unavailable  
remove local-cause-code-mapping hss-unavailable
 
Removes the configured cause code mapping. 
hss-unavailable emm-cause-code { eps-service-not-allowed-in-this-plmn | network-
failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
 
Specifies the EPS Mobility Management (EMM) cause code to return when the HSS does not respond. 
 
eps-service-not-allowed-in-this-plmn
 
 
network-failure
 
 
no-suitable-cell-in-tracking-area
 
 
plmn-not-allowed
 
 
roaming-not-allowed-in-this-tracking-area
 
 
tracking-area-not-allowed
 
Usage 
Use this command to configure the cause code returned to a UE when the HSS is unavailable. By default, the 
MME sends the UE the #17 - Network failure cause code when encountering this condition.  
This condition is detected in the following cases: 
 
HSS resolution fails in the MME. 
 
HSS does not respond in time.