Cisco Cisco ASR 5000

Page of 9109
Call Control Profile Configuration Mode   
▀  network-initiated-pdp-activation 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
2046 
   
network-initiated-pdp-activation 
Configures the call control profile to perform two functions: (1) to enable or disable network-requested PDP context 
activation (NRPCA) for 3G attachments and (2) to define a failure cause code for inclusion in NRPCA-related reject 
messages. 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
[ remove ] network-initiated-pdp-activation { allow primary | restrict primary 
secondary } access type { gprs | umts } { all | location-area-list instance 
<instance> } 
network-initiated-pdp-activation primary access type { gprs | umts } { all | location-
area-list instance 
<instance>  } failure-codecode 
network-initiated-pdp-activation secondary access type { gprs | umts } { all | location-
area-list instance 
<instance>  } failure-codecode 
remove
 
Including this keyword with the command, removes all configured values for the specified configuration. 
allow
 
Allows network-initiated PDP context activation. This keyword must be followed by other parameters to 
indicate the limitations for allowing the NRPCA. 
Allow is the default for NRPCA. 
restrict
 
Restricts network-initiated PDP context activation. This keyword must be followed by other command 
parameters to indicate the limitations for restricting the NRPCA. 
primary
 
Specifies that only network-initiated primary PDP context activations are to be allowed. 
secondary
 
Specifies that only network-initiated secondary PDP context activations (NRSPCAs) are to be allowed.