Cisco Cisco ASR 5000

Page of 9109
  Call Control Profile Configuration Mode 
network-initiated-pdp-activation  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
2047 
Important:
  The 
secondary
 keyword is visible and can be selected. However, NRSPCA functionality is only 
supported for Release 15.0 onwards. 
all
 
Configures the SGSN to allow or to restrict NRPCA for calls within all location areas. 
location-area-list instance instance
 
Selects a pre-defined list of location area codes (LACs) and allows/restricts the NRPCA procedure for calls 
within the listed area codes.  
instance
: Enter a list ID; an integer between 1 and 5. 
Important:
  Before using this keyword, ensure that the appropriate LAC information has been defined with the 
location-area-list 
command, also in this configuration mode. 
failure-codes code
 
Enter an integer from 192 to 226 to identify the GTPP failure cause code (from 3GPP TS29.060, list below) 
to be included in the reject messages when NRPCA is restricted. If a failure cause code is not defined, the 
default value is 200 (service not supported). 
 
192 - Non-existent 
 
193 - Invalid message format 
 
194 - IMSI not known 
 
195 - MS is GPRS Detached 
 
196 - MS is not GPRS Responding 
 
197 - MS Refuses 
 
198 - Version not supported  
 
199 - No resources available 
 
200 - Service not supported 
 
201 - Mandatory IE incorrect 
 
202 - Mandatory IE missing 
 
203 - Optional IE incorrect 
 
204 - System failure 
 
205 - Roaming restriction 
 
206 - P-TMSI Signature mismatch 
 
207 - GPRS connection suspended 
 
208 - Authentication failure 
 
209 - User authentication failed 
 
210 - Context not found 
 
211 - All dynamic PDP addresses are occupied 
 
212 - No memory is available