Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ peer-nri-length
▄ Command Line Interface Reference, StarOS Release 18
2062
This functionality is applicable in situations for either inter- or intra-PLMN when the SGSN has not chosen a
local NRI value (configured with SGSN Service commands) other than
local NRI value (configured with SGSN Service commands) other than
local-pool-rai
or
nb-rai
. This
means the RAI (outside pool but intra-PLMN) NRI length configured here will be applicable even for intra-
PLMN with differently configured NRI lengths (different from the local pool).
This functionality is not applicable to call control profiles with an associated MSIN range as ccprofile
selection is not IMSI-based. When this feature is enabled, the selection of the ccprofile is based on the old-
RAI and the PLMN Id (if configured) of the RNC (for 3G subscribers) or BSC (for 2G subscribers) where the
subscriber originally attached.
PLMN with differently configured NRI lengths (different from the local pool).
This functionality is not applicable to call control profiles with an associated MSIN range as ccprofile
selection is not IMSI-based. When this feature is enabled, the selection of the ccprofile is based on the old-
RAI and the PLMN Id (if configured) of the RNC (for 3G subscribers) or BSC (for 2G subscribers) where the
subscriber originally attached.
Example
The following command is used to configure a peer-nri-length of
3
, with support for RAI based query when
NRI based query fails:
peer-nri-length 3 rai-fqdn-fallback