Cisco Cisco ASR 5000

 

▄  Command Line Interface Reference, StarOS Release 18 

Defines P-TMSI reallocation for Attach Requests, RAU Request, and Service Requests. 

 

SGSN 

 

Security Administrator, Administrator 

 

Exec > Global Configuration > Call Control Profile Configuration 

configure > call-control-profile profile_name

 

Entering the above command sequence results in the following prompt: 

[local]host_name(config-call-control-profile-profile_name)# 

 

ptmsi-reallocate { attach | frequency frequency | interval interval  | routing-area-
update [ update-type ] | service-request [ service-type ] } [ access-type { gprs | umts } 
] 

ptmsi-reallocate routing-area-update [ access-type { gprs | umts } | frequency frequency 
| update-type { combined-update | imsi-combined-update | periodic | ra-update } [ access-
type { gprs | umts } | frequency frequency ] ] 

ptmsi-reallocate service-request [ frequency frequency | service-type { data | page-
response | signaling } [ frequency frequency ] ] 

[ no | remove ] ptmsi-reallocate { attach | frequency | interval | routing-area-update [ 
update-type { combined-update | imsi-combined-update | periodic | ra-update } [ access-
type { gprs | umts } ] ] | service-request [ service-type { data | page-response | 
signaling } ] } [ access-type { gprs | umts } ]  

 

Disables the authentication procedures configured for the specified P-TMSI reallocation configuration in the 
call control profile. 

 

Deletes the defined authentication procedures for the specified P-TMSI reallocation configuration from the 
call control profile configuration file. 

 

Enables/disables P-TMSI reallocation for Attach with local P-TMSI.  

  IMSI or inter-SGSN Attach is not configurable and will always be reallocated.