Cisco Cisco ASR 5000

Page of 9109
Call Control Profile Configuration Mode   
▀  rau-inter 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
2074 
   
rau-inter 
Defines acceptable parameters for inter-SGSN routing area updates. 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Call Control Profile Configuration 
configure > call-control-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-call-control-profile-profile_name)# 
Syntax
 
rau-inter { accept use-auth-vector | access-type gprs { all | location-area-list instance 
instance } { failure-code fail_code | user-device-release { before-r99 | r99-or-later } 
failure-code 
fail_code } } | allow accept access-type gprs location-area-list instance 
instance | avoid-s12-direct-tunnel | ctxt-xfer-failure | exclude-uteid-in-mbr | ignore-
peer-context-id | peer-sgsn-addr-resolution-failure failure-code 
fail_code | restrict 
access-type { { gprs | umts } { all | location-area-list instance 
instance } } 
default rau-inter ( accept use-auth-vector | access-type { { gprs | umts } { all | 
location-area-list instance 
instance } user-device-release { before-r99 | r99-or-later } 
failure-code 
fail_code } } | avoid-s12-direct-tunnel | failure-code fail_code | ignore-
peer-context-id | peer-sgsn-addr-resolution-failure failure-code 
fail_code } 
no rau-inter ( accept use-auth-vector | allow access-type { gprs | umts } location-area-
list instance 
instance | ignore-peer-context-id | restrict access-type { gprs | umts } { 
all | location-area-list instance 
instance } } 
remove rau-inter { avoid-s12-direct-tunnel | exclude-uteid-in-mbr | ctxt-xfer-failure} 
no
 
Including 
no
 as part of the command structure disables the values already configured for parameters specified 
in the command. 
default
 
Resets the configuration of specified parameters to system default values. 
remove
 
remove
 can only be used with the 
avoid-s12-direct-tunnel 
keyword to erase a configuration 
instructing the SGSN to avoid establishment of a direct tunnel for S12 interfaces. 
accept use-auth-vector
 
Sets the SGSN to accept using the authorization vector.