Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ subscriber multi-device
▄ Command Line Interface Reference, StarOS Release 18
2116
subscriber multi-device
Enable or disable the operator policy from allowing multiple PDN connections. When enabled, a maximum of 11 PDN
connections are allowed for a subscriber.
connections are allowed for a subscriber.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no ] subscriber multi-device
no
If previously enabled, disables multiple PDN device connections for a subscriber.
Usage
Use this command to enable or disable the operator policy from allowing multiple PDN connections for a
subscriber. If this optional configuration is not enabled, only one PDN connection is allowed for a subscriber.
subscriber. If this optional configuration is not enabled, only one PDN connection is allowed for a subscriber.
Important:
The SaMOG Web Authorization feature is license dependent. Contact your Cisco account
representative for more information on license requirements.
Example
The following command enables mutiple device connections for a subscriber:
subscriber multi-device