Cisco Cisco ASR 5000
Card Configuration Mode Commands
aps ▀
Command Line Interface Reference, StarOS Release 18 ▄
2165
non-revertive
Prevents the network from automatically reverting to the original working line/port when the the original
working line/port is recovered/restored.
working line/port is recovered/restored.
-noconfirm
Executes the command without additional prompting for command confirmation.
Usage
Important:
At this time, it is not necessary to use the
aps
command to configure parameters as all of these
parameters are enabled by default when the APS feature is enabled with the
aps-mode
keyword of the
command.
Use this command to configure feature parameters for the APS function for SONET CLC2 and OLC2 line
cards or to configure MSP-type APS for SDH CLC2 and OLC2 line cards. Based on the card framing
configuration (SONET or SDH), the system automatically knows whether the feature is APS or MSP.
cards or to configure MSP-type APS for SDH CLC2 and OLC2 line cards. Based on the card framing
configuration (SONET or SDH), the system automatically knows whether the feature is APS or MSP.
Example
As all parameters are included by default it is only necessary to enter the command:
aps