Cisco Cisco ASR 5000

Page of 9109
  Context Configuration Mode Commands E-H 
gtpp max-pdu-size  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
2489 
gtpp max-pdu-size 
Configures the maximum payload size of a single GTPP packet that could be sent by the system. 
Product
 
GGSN 
P-GW 
SAEGW 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration 
configure > context context_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ctx)# 
Syntax
 
gtpp max-pdu-size pdu_size 
default gtpp max-pdu-size 
default
 
Configures this command with the default setting. 
Default:65400 bytes 
pdu_size
 
Specifies the maximum payload size (in octets) of the GTPP packet as an integer from 1024 to65400. The 
payload includes the CDR and the GTPP header. 
Caution:
  This command is effective only when GTPP single-source is configured, otherwise this command has 
no effect. 
Usage 
The GTPP packet contains headers (layer 2, IP, UDP, and GTPP) followed by the CDR. Each CDR contains 
one or more volume containers. If a packet containing one CDR exceeds the configured maximum payload 
size, the system creates and send the packet containing the one CDR regardless. 
The larger the packet data unit (PDU) size allowed, the more volume containers that can be fit into the CDR. 
The system performs standard IP fragmentation for packets that exceed the system’s maximum transmission 
unit (MTU). 
Important:
  The maximum size of an IPv4 PDU (including the IPv4 and subsequent headers) is 65,535. However, 
a slightly smaller limit is imposed by this command because the system’s max-pdu-size doesn't include the IPv4 and