Cisco Cisco ASR 5000
Context Configuration Mode Commands N-R
▀ network-requested-pdp-context hold-down-time
▄ Command Line Interface Reference, StarOS Release 18
2660
network-requested-pdp-context hold-down-time
Configures the time duration to that the system will wait after the SGSN rejects an attempt for a network-requested PDP
context creation for the subscriber.
context creation for the subscriber.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
network-requested-pdp-context hold-down-time time
default network-requested-pdp-context hold-down-time
default
Configures the default setting.
Default:60 seconds
Default:60 seconds
time
Specifies the time interval (in seconds) as an integer from 0 through 86400.
Usage
Packets received during this time period would be discarded, rather than being used to cause another
network-requested PDP context creation attempt for the same subscriber. After the time period has expired,
any subsequent packets received would cause another network-requested PDP context creation procedure to
begin.
network-requested PDP context creation attempt for the same subscriber. After the time period has expired,
any subsequent packets received would cause another network-requested PDP context creation procedure to
begin.
Example
The following command configures a hold-down-time of
120
seconds:
network-requested-pdp-context hold-down-time 120