Cisco Cisco ASR 5000

 

▄  Command Line Interface Reference, StarOS Release 18 

This command configures the action on buffered packets when a redirect-indicator is received from the RADIUS server. 

 

All 

 

Security Administrator, Administrator 

 

Exec > ACS Configuration > Credit Control Configuration 

active-charging service service_name > credit-control

 

Entering the above command sequence results in the following prompt: 

[local]host_name(config-dcca)# 

 

redirect-indicator-received { discard-buffered-packet | reprocess-buffered-packet } 

{ default | no } redirect-indicator-received 

 

Configures this command with the default setting. Default: 

 

 

Disables the redirect-indicator-received configuration. 

 

Discards the buffered packet. 

 

Redirects the buffered packet on receiving a redirect-indicator from the RADIUS server. 

Use this command to configure the action taken on buffered packet when redirect-indicator is received. 
Diameter can return a redirect URL but not a redirect indicator, however RADIUS can return a redirect 
indicator. In this situation, any subsequent subscriber traffic would match ruledefs configured with cca 
redirect-indicator, and charging actions that have flow action redirect-url should be configured. However, 
some handsets do not retransmit, so there will be no subsequent packets. On configuring reprocess-buffered-
packet, the ruledefs are reexamined to find a new charging action, which may have flow action redirect-url 
configured. 

 

The following command configures the action taken on buffered packet when redirect-indicator is received to 
reprocess-buffered-packet: 

redirect-indicator-received reprocess-buffered-packet