Cisco Cisco ASR 5000

Page of 9109
DHCP Client Profile Configuration Mode Commands   
▀  client-identifier 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
3458 
   
client-identifier 
Configures the client-identifier which is sent to the external DHCP server. 
Product
 
GGSN 
P-GW 
SAEGW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > DHCP Client Profile Configuration 
configure > context context_name > dhcp-client-profile profile_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-dhcp-client-profile)# 
Syntax
 
client-identifier { imsi | msisdn } 
default dhcp client-identifier 
default
 
Specifies that the subscriber’s IMSI be included in the client-identifier option of relevant DHCP messages. 
imsi
 
Specifies that the subscriber’s IMSI be included in the client-identifier option of relevant DHCP messages. 
Important:
  The 
imsi
 option is not supported in this release. 
msisdn
 
Specifies that the subscriber’s MSISDN be included in the client-identifier option of relevant DHCP 
messages. 
Usage 
Use this command to configure which information is included in the DHCP client-identifier option of DHCP 
messages to external DHCP servers. 
Example
 
The following command specifies that a subscriber’s MSISDN be included in the DHCP client-identifier 
option of DHCP messages to external DHCP servers: 
client-identifier msisdn