Cisco Cisco ASR 5000
Diameter Endpoint Configuration Mode Commands
▀ dscp
▄ Command Line Interface Reference, StarOS Release 18
3544
dscp
This command sets the Differential Services Code Point (DSCP) value in the IP header of the Diameter messages sent
from the Diameter endpoint.
from the Diameter endpoint.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
dscp { value | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42
| af43 | be | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }
| af43 | be | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }
default dscp
value
Specifies to configure a unique DSCP as an integer in the range of 0 through 63.
af xx
Specifies the use of an assured forwarding
xx
per hop behavior (PHB).
be
Specifies the use of best effort forwarding PHB. This is the default.
csx
Specifies the use of class selector
x
per PHB.
ef
Specifies the use of expedited forwarding PHB.
Usage
Use this command to set the DSCP in the IP header of the diameter messages sent from the diameter
endpoint. In addition to the recommended PHBs the user may configure their own DSCP as an integer in the
range of 0 through 63.
endpoint. In addition to the recommended PHBs the user may configure their own DSCP as an integer in the
range of 0 through 63.
Example
The following command sets the DSCP to
be
:
dscp be