Cisco Cisco ASR 5000

Page of 9109
  Diameter Endpoint Configuration Mode Commands 
response-timeout  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
3563 
response-timeout 
This command configures the Response Timeout parameter. Response timeout specifies the maximum allowed response 
time for request messages sent from Diameter applications to Diameter server. On failure of reception of response for 
those request message within this specified time, this will be handled as failure by the corresponding applications and 
appropriate failure action will be initiated. 
Product
 
All 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration 
configure > context context_name > diameter endpoint endpoint_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-ctx-diameter)# 
Syntax
 
response-timeout timeout 
default response-timeout 
default
 
Configures this command with the default setting. 
Default: 60 seconds 
timeout
 
Specifies the response timeout duration in seconds, and must be an integer from 1 through 300. 
Usage 
Use this command to configure the Response Timeout parameter. 
Example
 
The following command sets the response timeout to 
100
 seconds: 
response-timeout 100