Cisco Cisco ASR 5000

Page of 9109
  EAP Configuration Mode Commands 
mode  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
3629 
mode 
Configures the system as one of three types of EAP devices: authenticator pass-through, authenticator server, or peer. 
Product
 
PDIF 
ASN-GW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > Context Configuration > EAP Profile Configuration 
configure > context context_name > eap-porfile profile_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(cfg-ctx-eap-profile)# 
Syntax
 
mode { authenticator-pass-through | authenticator-server | peer } 
default mode 
default
 
Configures the default mode of Authenticator-pass-through. 
authenticator-pass-through
 
Configures the system as an authenticator pass-through allowing EAP authentication to be performed by 
another server. 
This is the default setting for this command. 
authenticator-server
 
Configures the system as an authenticator server. This allows the system to respond to EAP requests. 
peer
 
Configures the system as a peer device requiring it to make EAP requests of another server or pass-through 
device. 
Usage 
Use this command to configure the system to perform as one of three types of EAP devices and configure 
settings in an EAP mode. 
EAP Mode Configuration Mode commands are defined in the EAP Mode Configuration Mode Commands 
chapter. 
Example
 
The following command configures the system to perform as an authenticator pass-through: 
mode authenticator-pass-through