Cisco Cisco ASR 5000

Page of 9109
EIR Profile Configuration Mode Commands   
▀  eir-address 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
3692 
   
eir-address 
Configures the address of the equipment identify register (EIR). 
Product
 
SGSN 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > Global Configuration > SGSN Global Configuration > EIR Profile Configuration 
configure > sgsn-global > eir-profile eir_profile_name
 
Entering the above command sequence results in the following prompt: 
[context_name]host_name(config-eir-profile-eir_profile_name)# 
Syntax
 
eir-address { isdn isdn_address | point-code  point_code } [ source-ssn source_ssn ] 
no eir-address 
no
 
Erases the address of the EIR from this EIR profile. 
isdn isdn_address
 
isdn_address
 enter a standard ISDN E.164 address of 1 to 15 digits to identify the EIR. 
point-code point_code
 
point_code
 enter a standard SS7 formatted point-code address, a string of dotted decimal format of 1 to 11 
digits, to identify the EIR. Format options include: 
 
0.0.1 to 7.255.7 for point-code in the ITU range. 
 
0.0.1 to 255.255.255 for point-code in the ANSI range. 
 
0.0.1 to 15.31.255 for point-code in the TTC Range. 
 
a string of 1 to 11 digits in dotted-decimal to represent a point-code in a different range. 
source-ssn source_ssn
 
source_ssn
 enter 1 to 3 digits to define the subsystem number of the element being identified. The default 
is 149 (SGSN). 
Usage 
Define a single EIR address to be used for multiple EIRs when this EIR profile is associated with a call 
control profile. 
Example
 
Delete the EIR address definition from the EIR profile: