Cisco Cisco ASR 5000
Ethernet Interface Configuration Mode Commands
▀ ip ospf transmit-delay
▄ Command Line Interface Reference, StarOS Release 18
3742
ip ospf transmit-delay
Configures the interval (in seconds) that the router should wait before transmitting an OSPF packet.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Syntax
ip ospf transmit-delayseconds
no ip ospf transmit-delay
no
Returns the value to its default of 1 second.
seconds
Specifies the number of seconds that the router should wait before transmitting a packet as an integer from 1
through 65535. Default: 1
through 65535. Default: 1
Usage
Configure the interval (in seconds) that the router should wait before transmitting an OSPF packet.
Example
To set the transmit-delay to
5
, use the following command;
ip ospf transmit-delay 5