Cisco Cisco ASR 5000
Exec Mode Commands (A-C)
▀ clear gtpu statistics
▄ Command Line Interface Reference, StarOS Release 18
3908
clear gtpu statistics
Clears enhanced GPRS Tunneling Protocol user plane statistics and counters found in show command outputs and bulk
statistics associated with all GTP-U-related services or those defined by the parameters in this command.
statistics associated with all GTP-U-related services or those defined by the parameters in this command.
Product
P-GW
S-GW
MME
SAEGW
Privilege
Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clear gtpu statistics [ gtpu-service gtpu_service_name | mseg-service mseg_service_name |
peer-address ipv4/ipv6_address ]
peer-address ipv4/ipv6_address ]
gtpu-service gtpu_service_name
Clears GTP-U statistics for an existing GTP-U service specified as an alphanumeric string of 1 through 63
characters.
characters.
mseg-service mseg_service_name
Important:
This keyword is not supported in this release.
peer-address ipv4/ipv6_address
Clears GTP-U statistics for an existing peer IP address entered in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal notation.
separated-hexadecimal notation.
Usage
Use this command to clear running statistics and counters found in show command and bulk statistics outputs
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
for all GTP-U-related services or for specific services or IP addresses as specified by parameters in this
command.
Example
The following command clears GTP-U statistics and counter associated with a GTP-U service name
gtpu-
12
configured on this system:
clear gtpu statistics gtpu-service gtpu-12