Cisco Cisco ASR 5000

Exec Mode Commands (A-C)

clear multicast-sessions ▀

Command Line Interface Reference, StarOS Release 18 ▄

3951

clear multicast-sessions

Disconnects broadcast-multicast sessions based on specified criteria.

Product

PDSN

SGSN

Privilege

Security Administrator Operator

Mode

Exec

The following prompt is displayed in the Exec mode:

[local]host_name#

Syntax

clearmulticast-sessions [ -noconfirm ] [ keywords ] [ verbose ]

-noconfirm

Executes the command without any additional prompt and confirmation from the user.

all

Disconnects all multicast sessions.

callid call_id

Clears the call specified by

call_id

. The call ID is as an 8-byte hexadecimal number.

card-num slot_num

Specifies the slot number of the packet processing card by which the multicast session is processed as a
number from 1 through 7 or 10 through 16 (for the ASR 5000) or from 1 through 3 or 6 through 10 (for the
ASR 5500).

flowid id

Clears calls for a specific Broadcast/Multicast Service (BCMCS) flow id, specified as a hexadecimal numbe.r

flowid-type [ flow | program ]

Clears multicast sessions according to the type of flow.

flow

: Clears all multicast sessions for the flow ID type “flow”.

program

: Clears all multicast sessions for the flow ID type “program”.

mcast-address

ipv4_address

Clears multicast sessions for a specific multicast address. Must be followed by the IP address of an interface
in IPv4 dotted-decimal notation.