Cisco Cisco ASR 5000

Page of 9109
  Exec Mode Commands (D-S) 
logging active  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
4125 
logging active 
Enables or disables logging for active internal log files. 
Product
 
All 
Privilege
 
Security Administrator, Administrator, Operator 
Mode
 
Exec 
The following prompt is displayed in the Exec mode: 
[local]host_name
Syntax
 
logging active [ copy runtime filters ] [ event-verbosity event_level ] [ pdu-data format 
] [ pdu-verbosity 
pdu_level ] 
no logging active 
no
 
Indicates the internal logging is to be disabled. 
copy runtime filters
 
Copies the runtime filters and uses that copy to filter the current logging session. 
event-verbosity
 
event_level
 
Specifies the level of verboseness to use in logging of events as one of: 
 
min
: Displays minimal information about the event. Information includes event name, facility, event 
ID, severity level, date, and time. 
 
concise
: Displays detailed information about the event, but does not provide the event source within 
the system. 
 
full
: Displays detailed information about event, including source information, identifying where 
within the system the event was generated. 
pdu-data
 
format
 
Specifies output format for packet data units when logged as one of: 
 
none
: raw format (unformatted). 
 
hex
: hexadecimal format. 
 
hex-ascii
: hexadecimal and ASCII similar to a main-frame dump. 
pdu-verbosity
 
pdu_level
 
Specifies the level of verboseness to use in logging of packet data units as an integer from 1 through 5, where 
5 is the most detailed.