Cisco Cisco ASR 5000
Exec Mode show Commands (A-C)
show active-charging group-of-objects ▀
Command Line Interface Reference, StarOS Release 18 ▄
4335
show active-charging group-of-objects
Displays information for ACS group-of-objects.
Product
ACS
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show active-charging group-of-objects { all | name group_of_objects_name } [ | { grep
grep_options | more } ]
grep_options | more } ]
all
Displays details of all group-of-objects configured in the system.
name group_of_objects_name
Displays details for the specified group-of-objects.
group_of_objects_name
must be the name of a group-of-objects, and must be an alphanumeric string of 1
through 63 characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view information for all/specific group-of-objects.
Example
The following command displays information for a group-of-objects named
test
.
show active-charging group-of-objects name test
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.