Cisco Cisco ASR 5000
Exec Mode show Commands (A-C)
show active-charging packet-filter ▀
Command Line Interface Reference, StarOS Release 18 ▄
4341
show active-charging packet-filter
Displays information on packet filters configured in an Active Charging Service (ACS).
Product
ACS
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show active-charging packet-filter { all | name packet_filter_name } [ service name
acs_service_name ] [ | { grep grep_options | more } ]
acs_service_name ] [ | { grep grep_options | more } ]
all
Displays information for all packet filters configured, optionally all configured in an ACS.
name packet_filter_name
Displays detailed information for an existing packet filter specified as an alphanumeric string of 1 through 63
characters.
characters.
service name
acs_service_name
Displays information for all filters or the specified packet filter in the specified ACS.
acs_service_name
must be the name of the ACS, and must be an alphanumeric string of 1 through 15 characters.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view information on packet filters configured in an ACS.
Example
The following command displays information for the packet filter
filter12
:
show active-charging packet-filter name filter12