Cisco Cisco ASR 5000

Page of 9109
  Exec Mode show Commands (A-C) 
show aps  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
4403 
show aps 
Displays information for configured Automatic Protection Switching (APS) parameters. 
Product
 
SGSN 
Privilege
 
Inspector 
Mode
 
Exec 
The following prompt is displayed in the Exec mode: 
[local]host_name
Syntax
 
show aps { all | card-stats slot_number [ clear ] | info slot_number/port_number | port-
stats 
slot_number/port_number [ clear ] | port-status } [ | { grep grep_options | more } 
]
 
all
 
Lists APS information for all cards configured with APS. 
card-statsslot_number [ clear ] 
 
Displays the APS statistics for the identified card. If the 
clear
 keyword is included with the command, the 
APS statistics for the specified card are cleared (reset to zero). 
slot_number
 is an integer that identifies the chassis slot holding the card. 
infoslot_number/port_number
 
Displays APS information for a specific port. 
slot_number/port_number
: The first number must be an integer that identifies the chassis slot holding the 
specified card. The slot number must be followed by a slash ‘/’, which must be followed immediately by the 
port number - an integer from 1 to 4 depending upon the type of card. 
port-statsslot_number/port_number [ clear ] 
 
Displays APS statistics for a specific port. If the 
clear
 keyword is included with the command then the APS 
statistics for the specified port are cleared (reset to zero). 
slot_number/port_number
: The first number must be an integer from 1 to 48 to identify the chassis slot 
holding the specified card. The slot number must be followed by a slash ‘/’, which must be followed 
immediately by the port number - an integer from 1 to 4 depending upon the type of card. 
port-statusslot_number/port_number
 
Displays APS status information for a specific port. 
slot_number/port_number
: The first number must be an integer from 1 to 48 to identify the chassis slot 
holding the specified card. The slot number must be followed by a slash ‘/’, which must be followed 
immediately by the port number - an integer from 1 to 4 depending upon the type of card.