Cisco Cisco ASR 5000

Page of 9109
  Exec Mode show Commands (D-G) 
show diameter route table  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
4563 
show diameter route table 
Displays the Diameter routing table. 
Product
 
All 
Privilege
 
Security Administrator, Administrator, Operator, Inspector 
Mode
 
Exec 
The following prompt is displayed in the Exec mode: 
[local]host_name
Syntax
 
show diameter route table [ wide ] [ endpoint endpoint_name ] [ | { grep grep_options 
more } ]
 
wide
 
Displays the route table information in wide-format. 
endpoint endpoint_name
 
Displays the Diameter routing table for the Diameter endpoint specified as an alphanumeric string of 1 
through 63 characters. 
| { grep grep_options | more }
 
Pipes (sends) the output of this command to a specified command. You must specify a command to which the 
output of this command will be sent. 
For details on the usage of 
grep
 and 
more
, refer to the Regulating a Command’s Output section of the 
Command Line Interface Overview chapter. 
Usage 
Use this command to view the status of Diameter client endpoints. 
If you are in the local context, then the route information used by Diameter endpoints in all chassis contexts 
will be used in the display. 
The route table displays all static and dynamic routes. Refer to the route-entry CLI command in Diameter 
Endpoint Configuration Mode. 
Default value: N/A 
Example
 
The following command displays status of the Diameter client endpoint named 
endpoint12
show diameter route table endpoint endpoint12