Cisco Cisco ASR 5000
Exec Mode show Commands (H-L)
show ipv6 neighbors ▀
Command Line Interface Reference, StarOS Release 18 ▄
4707
show ipv6 neighbors
Displays the neighbor table for all IPv6 addresses or a specified IPv6 address in the current context.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ipv6 neighbors [ ipv6_address ] [ vrf vrf-name ] [ | { grep grep_options | more } ]
ipv6_address
Displays information for an existing IPv6 address specified in IPv6 colon-separated-hexadecimal notation. If
no IPv6 address is specified, the information for all IPv6 addresses is displayed.
no IPv6 address is specified, the information for all IPv6 addresses is displayed.
vrf
vrf_name
Displays Virtual Routing and Forwarding (VRF) routing information for an existing VRF specified as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to display neighbor information for IPv6 address(es) in the current context. This
information can be used to verify and/or troubleshoot communication difficulties between to a remote
host/node.
information can be used to verify and/or troubleshoot communication difficulties between to a remote
host/node.
Example
The following command displays the neighbor information for the IPv6 address
ffe:ffff:101::230:6eff:fe04:d9aa
.
show ipv6 neighbor ffe:ffff:101::230:6eff:fe04:d9aa
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.