Cisco Cisco ASR 5000
Exec Mode show Commands (H-L)
▀ show ipv6 route
▄ Command Line Interface Reference, StarOS Release 18
4714
show ipv6 route
Displays information related to specific route for current context.
Product
PDSN
GGSN
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ipv6 route [ ip-address/mask ] [ vrf vrf-name ] [ | { grep grep_options | more } ]
ip-address/mask
Specifies an IP address entered using IPv6 colon-separated-hexadecimal and CIDR notation.
vrf
vrf-name
Displays Virtual Routing and Forwarding (VRF) routing information for an existing VRF specified as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to see all the ipv6 route information.
Example
The following command displays ipv6 route information:
show ipv6 route 2001:0db8:85a3:0000:0000:8a2e:0370:7334/5