Cisco Cisco ASR 5000

Page of 9109
Exec Mode show Commands (M-P)   
▀  show mipha 
 
 
▄  Command Line Interface Reference, StarOS Release 18 
4772 
   
show mipha 
Displays information for specified Mobile IP Home Agent (MIP-HA) calls. 
Product
 
HA 
Privilege
 
Security Administrator, Administrator, Operator, Inspector 
Mode
 
Exec 
The following prompt is displayed in the Exec mode: 
[local]host_name
Syntax
 
show mipha { [ [ counters | full | summary ] { all | callid call_id | imsi imsi_num | ip-
address 
ip_addr | msid msid_num | peer-address [ operator ] peer_address | reverse-tunnel 
{ on | off } | username 
user_name } | statistics [ ha-service ha_name | peer-address 
peer_address ] } ] | peers ha-service service_name [ current-sessions { { > | greater-
than } 
sessions [ < sessions ] | { < | less-than } sessions [ > sessions ] | sessions } ] 
[ peer-address 
address ] } [ | { grep grep_options | more } ] 
counters | full | summary
 
Default: concise output. 
counters
: Displayed output includes the statistical counters. 
full
: Displays detailed information. 
summary
: Displays only summary information. 
These options are not available in conjunction with the 
statistics
 keyword. 
msid msid_num
 
Displays information for the subscriber with the supplied MSID on HA. 
msid
 
msid_num
 specifies a mobile subscriber ID for which information is to be displayed. 
ms_id
 must be 
from 7 to 16 digits for an IMSI, MIN, or RMI and /or characters $ and * for wildcard filtering. 
If 
enforce imsi-min equivalence
 is enabled on the chassis and MIN or IMSI numbers are supplied, 
this keyword/ filter will show subscribers with a corresponding MSID (MIN or IMSI) whose lower 10 digits 
matches the lower 10 digits of the supplied MSID. 
show mipha msid
 
ABCD0123456789
 or 
show mipha msid
 
0123456789
 
Shows any subscriber with a MSID that match the lower 10 digits of MSID supplied, such as 0123456789. 
show mipha msid
 
01234567$$
 
Shows any subscriber with a MSID that match the upper 8 digits of the supplied MSID, such as 01234567 
and any two digits at the remaining two places. 
all | callid call_id | imsi imsi_num | ip-address ip_addr | msid msid_num | peer-
address [ 
operator ] peer_address | reverse-tunnel { on | off } | username 
user_name
 
all
: Displays all available information.