Cisco Cisco ASR 5000

Firewall-and-NAT Access Ruledef Configuration Mode Commands

▀ icmp code

▄ Command Line Interface Reference, StarOS Release 18

5158

icmp code

This command configures an access ruledef to analyze user traffic based on ICMPv4 code.

Product

PSF

NAT

Privilege

Security Administrator, Administrator

Mode

Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration

active-charging service service_name > access-ruledef access_ruledef_name

Entering the above command sequence results in the following prompt:

[local]host_name(config-acs-fw-ruledef)#

Syntax

[ no ] icmp code operator code

Removes previously configured ICMPv4 code ruledef.

operator

Specifies how to logically match the ICMPv4 code.

operator

must be one of the following:



: Does not equal



: Less than or equals



: Equals



: Greater than or equals

code

Specifies the ICMPv4 code.

code

must be an integer from 0 through 255.

Usage

Use this command to define an access ruledef to analyze user traffic based on the ICMPv4 code.

Example

The following command creates an access ruledef for analyzing user traffic using the ICMPv4 code as

icmp code = 23